Having problems with your Konica Minolta DiMAGE E500 Digital Camera ?

Lens is jammed on my "Dimage E500" and error message "Lens Error" appear on the LCD when I turn the camera on.


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE E500 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens is jammed on my "Dimage E500" and error message "Lens Error" appear on the LCD when I turn the camera on.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Konica Minolta DiMAGE E500 Digital Camera

Lens Error. Hi. I dropped my camera on the 30th of December last year, while taking pictures of Christmas lights. This happened, when I was being stupid, because I didn't put my wrist ********. It slipped right out of my hands and fell lens down on the concrete while it was on. I picked it up and it said: lens error. When I turn it in, the lens will go out as normal, but the message will appear and it will turn off. The shutter only closes halfway. I think it is jammed. Is there anyway to fix th


Try jiggling the lens. Use compressed air to blow out any grit around the lens barrel. If that doesn't do it, you'll need to get the camera serviced. ... Nikon COOLPIX L18 Digital Camera

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Camera felled to floor lens tries but cannot retract camera turns on and off fine, error message "lens error, restart camera" it appears that until lens can function properly and error message is resolved camera is inoperable.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A630 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you


This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

Lens error When I turn my camera on an error message reading, "Lens error, restart camera" appears. And then it shuts itself off. What do I do?


Hey Wiggs12485,\015\012 This error message appears when the camera detects a problem with the lens when it's turned on. This is often caused by the user pressing on the lens when it is trying to extend, or the camera ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

Nikon Coolpix S10 Problem: Lens Error The camera is less than a year old and "Lens Error" has suddenly appeared on the LCD screen. The camera makes a vibrating noise when it turns on then stops. I can do nothing with the camera including shutting it off. I need to take out the battery to shut it off. Help!!!


You can take pictures ( without VR function ) by starting your camera from play button then switch to photo !Lens error appear after a shock . VR mechanism have piezo actuators glued with epoxy resin together with an c ... Digital Cameras

When I turn the camera on I get a message ''Lens error, restart camera'' The camera automatically shuts off and when I turn it back on the same message appears


HiWhat you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.A couple solutions would be to eith ... Canon PowerShot SD1000 Digital Camera

I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,


The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens

My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera

When in a record mode LCD says to "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures but cannot take pictures. Any ideas what might be causing this message to appear?


You are experiencing a media miscommunication. This due to low or incorrect amount of voltage to the cameras coding circuits.Take a Q-Tip "dampened" with rubbing alcohol and clean inside the battery compartment well. Do the battery contacts and the c ... Panasonic Lumix DMC-FX500 Digital Camera

I purcahsed a new canon SLR 7D and have an error message on the LCD screen E30. instructions says to remove battery pack or turn off the camera but it seems its not working at all. i have tried so many times but the error message keeps appearing on the LCD screen. What can I do?


According to Canon's Knowledge Base here, this error means that there is ... Canon Digital Cameras

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

I get a Camera Error message for no apparent reason. It appears on either lens at random times. I bought the camera new in September, and it worked fine until about a month ago. Sometimes I turn the camera off for awhile and then when i restart i get a couple of exposures then it reverts to the camera error thing.


There are numerous things that can cause a lens error, and none of them good. The camera is almost new and shouldn't be experiencing any of these messages. You should contact Sony support and see what can be done. Here is their support site: ... Sony Alpha DSLR-A230 Digital Camera

E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in


I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera

Digital camera i recently bought a digital camera,we went to the beach and all of the sudden the lens would not come out.the camera makes an effort but stops and goes back in.on the display screen an error message appears telling me to turn off and turn on again,plz help


Hey everardo,\015\012 What is most likely going on is that something (i.e. sand) is obstructing the movement of the lens. You can try gently blowing compressed air into the sides of the lens to try and dislodge whate ... Digital Cameras

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

My camera turns on with a tiny sound like it used to when the lens was telescoping out. but it won't go but a slight distance when the message "lens error-restart camera" appears.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot A75 Digital Camera

T1235 camera - battery is fully charged, but lens will not extend and camera can not be shut off once it is turned on. I have to take the battery out for it to shut off. The LCD screen shows blurry image of what is seen through **** in lens cover. No error messages are shown.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Polaroid t1235 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5887 seconds