Having problems with your Konica Minolta DiMAGE G400 Digital Camera ?

Powers up, lens doesn't move, shows error MF00C and shuts down.

\015 Anybody can help? My favorite camera, a Minolta Dimage G400, powers up, the lens doesn't move, LCD shows system error MF00C, then it beeps and shuts down. :(( I own this camera for approximately 4 years now and I shot thousands of top quality pictures without any problem. I would not like to move over to another cam or brand, even if this one is already some kind of obsolete (small LCD, etc.).\015

Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE G400 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Powers up, lens doesn't move, shows error MF00C and shuts down.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Konica Minolta DiMAGE G400 Digital Camera

I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate


... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens error When I first power on my camera, it tells me to retry power on. When I do, it says lens error and shuts down. The lens will extend and then close before the power shuts off, however it does not close fully. The protective shutter on the lens doesn't close completely. I have tried removing the battery and letting the camera sit for awhile hoping that the camera will reset, however this has been of no help.


Maybe the lens is stuck. ... Casio Exilim Zoom EX-Z80 Digital Camera

I need help with my canon power shot sd1000 camera it shows lens error the lens will not shut


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD1000 Digital Camera

Zoom Error Just bought an Olympus SP550 Ultra Zoom for my daughter. In less than 24 hours the cam developed a problem. When she turns it on, the zoom lens goes part way out, a message "zoom error" shows on the screen, and it powers itself off. We thought it might just be the batteries, but new ones didn't help. Similar problem with SP-560UZ On power up lens clicks & sticks when zooms out. Then get "zoom error" & powers off. Tried new batteries, helping lens out. Leaving batteries out. Could not


I think a grain of sand was blocking the zoom tubes. This will not work if the camera has been dropped & the zoom apparatus is bent. It is entirely at your own risk & may invalidate any guarantee but they may charge anyway if you have got san ... Digital Cameras

I have a Polaroid t737. I plugged it into a Mac OS X to try and download pictures, and the drive never showed up. Therefore I unplugged it from the computer. Now when I push power, the LCD comes on for a few seconds, and then the camera shuts back down. The lens is fully closed and doesn't move, and banging the side doesn't help.


It is always a good idea to plug in these units before turning it on and turning it off before unplugging it. What can happen is something like this:When you plug in a live camera or anything else, you may get a voltage spike or some volt ... Polaroid T737 Digital Camera

When i push the power button on my camera the lens just moves inward and outward and then shuts off and when i plug my battery in to charge it doesnt charge


Sounds like its time to replace the battery to me, the only other way to find out for free is to borrow a battery from a willing friendly soul and trying that out first. ... Olympus FE-340 Digital Camera

Lens error My daughtor droped a Canon PowerShot A570 IS on the floor an now its broken: Lens remains extended and open, at switching-on the Error "lens error, restart camera" apeares on the LCD Screen, the Lens moves a little bit, and the camera shuts off after some seconds. Any Advise how to self repair it? Regards Peter


Hello folks,\015\012\015\012I hate to be the bearer or bad tidings but you have all suffered from what is probably the number one affliction of digital cameras - the deadly child drop :-(\015\012\015\012In almost all cases the ... Canon PowerShot A570 IS Digital Camera

Lens error Lens is fully retracted. At power on there is motor noise and clicking but the lens does not extend. Screen reports "lens error" and the camera shuts down. Can the camera be partially dismantled to release the lens or is this a full repair job?


Try the procedures in this tip before taking the camera in for repairs. ... Canon PowerShot S95 Digital Camera

Lens Error My cameras battery was low but I kept taking pictures until the camera shut off by itself. The lens didn't retract all the way and now when I try to turn my camera on it makes a clicking noise like the lens wants to move but it doesn't and on the back screen it states a lens error. I am not sure how to resolve this problem I have charged the battery and taken it out. I unfortunately do not have the manual on me.


I have exactly the same problem with my camera, except there is no error message - just the screen is off (bat is full). i cant find a soultion anywhere in the manual or online. Any help on this would be much appreciated. ... Casio Exilim EX-S500 Digital Camera

Lens error get lens error, will shut down automatically. Lens does not come out. hear grinding noise like it is trying to move lens out


Try the procedures in this tip. ... Canon PowerShot S95 Digital Camera

When I turn the camera on, the lens extends, makes a few noises like it is trying to retract the lens. The viewer shows nothing - like the lens cover is on. When I push the power button to shut it off, it makes the noises again and shuts off but does not retract the lens. The battery is fully charged.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Olympus FE-220 Digital Camera

Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg


It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera

Lens error. On power up, lens moves forward and backward but does not focus properly, and then camera gives the display 'Lens error'. Appears to be an electronic autofocus problem, rather than lens motor jamming due to grit etc. No unusual noise, anyway, from motors.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix S210 Digital Camera

Lens error when I power on the camera, the lens comes out, then quickly closes and it says 'lens error' and shuts down


My daughter had this same problem with her camera. We tried everything to get it fixed including the compressed air thing and it didn't work. Then I read somewhere to lay the camera face up on a flat surface pointed toward the ceiling. Hold the sh ... GE A730 Digital Camera

Lens error when i switch 'on' the camera the lens is out but it suddenly shut down.and the screen shows 'lens error!


... Nikon COOLPIX S5100 Digital Camera

Lens error when turning power on, lens opens then closes and the screen shows "lens error" message.


Inside the lens their is strip ,its broken inside change it ... Casio EXILIM ZOOM EX-Z70 Digital Camera

Black Screen ive got a black screen when i take pictures; everything else on the camera works. the menu's pop up; the pictures ive taken show on review. but the actual view doesnt show anything and is completely black so whenever i take a picture its just all black. i just got this camera for christmas and it hasnt been dropped or exposed to liquid. it doesnt show a lens error number either; because i dont even think it knows it has one.. its just black though.


I have the exact problem. I came on slowly, some days it would work, some days it wouldnt. Finally i couldnt get it working at all. Sent it back to Kodak as it was still under warranty, the repair center claims it was "physical damage". They admit th ... Kodak Easyshare M753 Digital Camera

Lens error i have a powershot s3is and when i move the zoom on the lens a lens error comes up and the camera shuts down.


If you've recently dropped the camera you may have damaged the lens tube (housing) or jarred the zoom mechanism off of its track. Either one of those problems will require professional repair. If it hasn't suffered from a drop, your problem may be ... Canon Digital Cameras

Lens Error When I turn on my camera, my lens doesnt open all the way, then closes shut and the screen states "lens error" what can I do to fix this, or where can I take my camera to be fixed? Thanks!


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon Coolpix S210 Digital Camera

Lens error camera shows lens error in screen abd shuts down with the lens still out


Trouble is with the motor, you have to take it to an authorize\015\012dealer for repairs. ... Casio EXILIM ZOOM EX-Z70 Digital Camera

Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor


... Panasonic Lumix DMC-LZ1 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card


... Canon SD4000 IS IXUS 300 HS Digital Camera

LENS ERROR msg shows on LCD screen when unit is powered on.


Try the procedures in this tip. ... Pentax Optio 60 Digital Camera

Error showing while Restart of the camera: error message shown: Lens error Will shut down automatically Restart camera


See http://www.fixya.com/support/r13011856-lens_error ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3387 seconds