Having problems with your Konica Minolta DiMAGE G400 Digital Camera ?
I can't seem to be able to disable a double flash! Is this normal?
\015 I have a Minolta Dimage G400. Everytime I take a picture there is a double flash about 1 to 2 seconds apart. The picture is taken on the second flash. How can I set it up to flash only once?\015
This is meant to happen. If you don't use the double flash then your subjects will have red eyes.
Turn off red eye reduction and you'll only get one flash.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE G400 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I can't seem to be able to disable a double flash! Is this normal?
This is meant to happen. If you don't use the double flash then your subjects will have red eyes. ... Konica Minolta DiMAGE G400 Digital Camera
Although this camera will work when plugged into the mains and functions normally, it will not work off its battery - I have bought a new batttery and the camera does not seem to be able to charge it - just like the original battery. No lights flash at all.
The problem is clearly in the charging circuits of the adapter, the only other thing is check the connecting pins on the adapter, "by cleaning the points" if this fails, the unit will need to be dis-assembled for repair or replaced. ... Kyocera Finecam S3 Digital Camera
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera
I have a Nikon D300. I can't seem to figure out what's wrong, I assume it's a setting issue. In low light situations even with the flash I can't seem to stop action or even properly light things. I have had any kind of issue like this on a camera before. In situations where I should be able to handhold I am using a monopod. I know there is enough light to not have to handhold, I mean I am using the flash. Frankly even with available light this should not be an issue.
Hi there will you please check the exposer settings? If its in not under then go in camera settings from manu & reset the camera settings. After that if yu face the same problem then there is few reason can happens. 1. your Flash hood not sence t ... Digital Cameras
Hello, I have a sony DSC-T70 and I cant change the flash options. i should be able to select the flash icon and choose my flash setting, but the only setting is no flash. I really want my flash to work as my pictures are not coming out.
Hello\015\012\015\012Have you consulted the manual in this?\015\012\015\012http://184.108.40.206/release/DSCT70.pdf\015\012\015\012 ... Digital Cameras
Automatic flash I am not able to figure out how to get the "Auto Flash" to come on - my camera seems to be stuck on "No Flash"
Try looking for a settings button and play with it a bit and try to find out where it is! it is bound to be on the somewhere. if no luck them take it back and ask there! ... VistaQuest VQ-5010 Digital Camera
I am using an Olympus E-500. and am trying to use the built in flash, set to one eight or to one sixty fourth of normal output, to trigger an external flash unit. The camera is set to "Vivid", manual, auto focus, and iso 100. From the "manual flash" menu I should be able to select either full, 1/4. 1/16 or 1/64 of the output. However, those choices never light up. I keep cycling through the first two lines of the menu and never reach the third line with the light output options I want. P
You should consult a Professional Photographer / Cameraman or contact the Customer Care of the Company. ... Digital Cameras
Flash i lost my instruction manuel and i was wondering how to put the flash on....someone messed with my camera and i cant seem to figure out how to put the flash on.....
Here is the manual for the DSC-W35. http://www.sony.jp/products/di-world/cyber-shot/manual_english/W35_handbook.pdf\0 ... Sony Cyber-shot DSC-W35 Digital Camera
Flash i seem to have lost the flash on my camera - i had it for christmas and all of a suddon the flash stopped working. i loved my camera and now cant use it to take pics on nights out etc!! Does anyone know hoe to fix it?
My solution would be to obtain a faulty Z5 with only a broken screen from eBay. Most sellers are pretty up front with detail. Swapping -out the screen is a 10min DIY job with a steady hand, a small tri-blade and small pozi. Detail can be made availab ... Fuji FinePix Z5fd Digital Camera
My Power shot a550 flash is not working. The flash sign on the display will only blink, and can not take picture. When I disable the flash, then I am able to take picure.
The flash bulb must have gone dead. just need to replace it. the service center will do it in a couple of minutes. do not worry ... Canon PowerShot A550 Digital Camera
Downloading Photos Im having problems downloading photos from my camera to my laptop. i have used the usb cord between laptop and camera and it seems to connect ok. I cant open Olympus media at all so i have tried opening by using explorer. It seems to pick up my first 20 or so photos but will not show the other 200 of them. I havent been able to transfer them accross at all i have even tried copy and paste but an error message keeps coming up saying that its the worng file name. The only thing
Remove the Olympus software.Let Windows find them with the Camera/Scanner Wizard.It is likely the laptop has not the memory resources to receive all the photos in one hit so try in batches of 10 or s ... Olympus Stylus 770 SW Digital Camera
Please help! I have a Canon Powershot A460. When I take pictures in macro mode, they are all flashed out, so bright even if taken indoor. I can barely make out an image. But if I take normal shot, results seem normal. I have read the manual -basic & advanced- but I can't find the right solution. This does not happen before.
Try going into the M(anual) mode on the selector dial and then turn off the flash (press the right side of the controller button until you see the lightning bolt with a bar through it). The macro shooting option should still be available in the manua ... Canon PowerShot A460 Digital Camera
The camera was working fine. I imported the pictures to Picassa succesfully and turned the camera off. I then went to take new pictures and all I get is a black LCD screen and when I load into Picassa the pictures are all black. The camera seems to work well, zoom, flash menu all seem normal except there is no picture. Can it be fixed and would it be cost effective?
The CCD is bad or the Iris is shut stuck. If it's the Iris just stuck, it might just have moisture - leave the camera in a dry place for a day. If it's the CCD - pretty much "kiss-it-good-bye". To replace the CCD is expensive - get a new camera. ... Digital Cameras
Flash problems Hi i cant get the flash working on the E 510. tried to change the settings, but nothings seems to work. Can there be a short in the wire system or can the bulb be burnt out?
Yes and yes. If you've popped it up and it won't fire, it looks like you're in for a repair, hopefully under warranty. ... Fuji FinePix E510 Digital Camera
When i take a picture the flash almost seems to double flash and the pictures come out yellow or way too bright
If you have the flash set to "red-eye", it will flash twice to prevent red-eye. ... Samsung Digimax D53 Digital Camera
Brand-new Canon Powershot SX120 IS and have put in the batteries and card included in the pack. All seems to be working normally - EXCEPT the screen is continually dark and not showing anything the camera is pointing at. Only the standard icons appear on the screen. The flash seems to be working correctly. Have checked through the instruction manual and not sure what I have done wrong - I have literally set it all up by the book and previous camera was a Canon, so it is fairly familiar with sett
I am not sure if this advice will work for your model, but it does work for other Canon models.There is a DISP button on the back. When you push it in, it will turn off the LCD display. Hit it again, and it will keep the display off but ... Canon PowerShot S3 IS Digital Camera
Blurry LCD Well, I have recently got a SD400 camera from dell.com. The first thing I noticed was the inaccurate LCD. The picture in the LCD seemed blurry(bad resolutoin, weird coloring) and inaccurate. But, after actually taking the pictures, the picture seemed perfect. (In the review mode and the display right after you take a picture.) Is this a problem? This is my first digital camera, thus I had no previous experience with camera LCD. Or is this normal, without flash, everything is suppose
Hey i found this site that is great on how to change a LCD for the camera\015\012\015\012http://digitalcamerarepair.googlepages.com ... Canon PowerShot SD400 / IXUS 50 Digital Camera
Flash rebound I am new to digital cameras. So i took a long time searching before deciding on yhe tz3.The camera works great in daylight situations but with night snaps taking shots against glass or neon etc the flash is on the photograph also neon is exagerated spoiling the snaps.I have tried everything on the menu but cant seem to rectify. I am new to this but just back from holiday with mates all with different makes of cameras and not one had same problem. Any ideas. jack.
A camera flash against a glass, or any reflective surface, will bounce the flash light right back at you. Turn off flash when shooting through glass. Note flash is only for shots less than 12 ft distance. It take it you are shooting scenery shots thr ... Panasonic Lumix DMC-TZ3 Digital Camera
DSC-W70 The camera seems to work as it should however when I take a picture, the resulting image on the LCD screen is distorted. By this I mean that lines appear horizontally across the screen. The only time that it works well is when I take it out of normal mode and set it to Multi Burst. However with Multi Burst, the flash does not work.
Did you ever get this problem resolved? ... Sony Cyber-shot DSC-W70 Digital Camera
My sister Locked my camera , she cant remember how and now when i try to turn it on the locked sign/picture thing flashes, is there anyway to unlock it, my instuctions dont say anything about even being able to lock it,
Take the SD memory card out of the camera and move the small lock switch to the opposite position. That should unlock the card. ... Polaroid T737 Digital Camera
I turn on the A300 and it seems to power up normally, but now my LED Display is Black. All Icons are present though. New AA Batteries, Flash Card is new.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A300 Digital Camera
I have a vivitar 3695 camera and i dont seem to be able to down load my opictures, on the screen of the camera it flashes pc cam and on the screen it displays mass storage. please help me. many thanks
Ask at manualfox.com for the needed Vivitar Vivicam driver. ... Vivitar ViviCam 35 Digital Camera
Nikon D200 I can't seem to import pictures on to my pc. I shoot in RAW. I have Picture Project loaded which came with the camera. I also have Adobe Elements which normally imports my pictures. It wont read the compact flash card in this instant but if I go through my computer, and look at the D200 picture file, I can see all the thumb nails. Can't remember how you are meant to import with just Nikon provided software!! Help! In a rush, about to go on trip to Africa and need to make sure I load
All procedures on how to pictures is in the user mnual about Picture Project loaded.\015\012Just click below to download D200 user manual pdf files.\015\012\015\012 ... Nikon Digital Cameras
When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but
Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera
Black screen Hi there My camera has been working fine now for 3 years had no problems till now. I come to take a picture and the viewing screen is black although the lense and flash are working as normal. seems like i can take a picture but this to comes out black any help would be great Amanda
This sounds like it might be a defective CCD imager. If so, Fuji should fix this for you for free. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\012\015\012 ... Fuji FinePix F410 Digital Camera