Having problems with your Konica Minolta DiMAGE X1 Digital Camera ?

Konica minolta x1 dent in front case, how easy is it to remove the front case to take out the dent.?


Answers :

Not easy and not worth it. If it works, leave it alone.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE X1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Konica minolta x1 dent in front case, how easy is it to remove the front case to take out the dent.?


Not easy and not worth it. If it works, leave it alone. ... Konica Minolta DiMAGE X1 Digital Camera

I have a Minolta f300 camera whith an internal battery that needs to be replaced. Sending it to Minolta (Sony now) would require a flat fee of $181 which is of course morethan the value of he camera. I can remove the back case but the front case, which covers the internal battery, seems to be attached to the telephoto lens and does not seperate easily from the camer's internals. I don't want to force it and break something. What is the procedure for removing the front case? Thanks


I just took my entire camera apart so if you still need to know how to do this you can email me at [email protected] the ring around hte lense pops off and there is a screw in the ... Digital Cameras

Front case has a dent in ,below the shutter ,? pictures dont seem as good, is it a simple task to remove front of casing to remove dent , ie 4 screws on rear?(or will it all fall apart)


Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics. If you can afford another camera and are willing to take the risk of taking it apart, it may be worth t ... Konica Minolta DiMAGE X Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Hi.If you already tried several memory cards, then it looks like the problem is the camera.To ensure you can go to a camera shop and ask them to test it, but if you already tried several new cards (ensure size of card is with ... Konica Minolta DiMAGE A2 Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Have you formatted the cards in the camera or in the computer? ... Konica Minolta DiMAGE A2 Digital Camera

My camera was drown in swimming pool, then i immediately remove the battery and the sd card.. then i wipe out the water.. then i put my camera under the sun to dry up.. then i try to turn it on, it does. but i cant take pictures its totally no images.. when i went home i place my camera in front of electric fan to dry it more.. then luckily when try to turn it on again, its ok.. but when i take a shot i saw images but its blurd already... i still see some water in screen.. then i took my came


Bad news if your camera isn't wheatercamera, the problem you are experiencing at the \015\012moment, is a typical result of a CCD which have blown. A CCD problem would explain the lines on your pictures and the lines on the L ... Olympus FE4020 Digital Camera

How to remove lens from a minolta dimage 7hi - Konica Minolta DiMAGE 7Hi Digital Camera


... Konica Minolta DiMAGE 7Hi Digital Camera

My konica minolta dimage g530 is giving me problems. When taking pics outside, only a white screen appears, no picture. When taking a pic inside, I do get the image I shot. The setting are the same inside as well as outside. I have had this camera for several years and never had any problems. What is going on with my camera and can this problem be fixed?


... Konica Minolta DiMAGE G530 Digital Camera

Konica minolta maxxa, 7d camera will not take pictures. For several months it has not taken the first shot after it has been off for a while. The pictures are blank. now it will not only takes blank shops, but also cuts off after first shot. can anyone help me?? eb


If you will state manufacturer and model no. it will help experts to find out your problem. ... Digital Cameras

I have Konica Minolta Dynax 7D and the following problem; one moment the shutter works, and the next moment after shutting the camera down and back on it refuses to take a picture. The focussing works asif everything is normal but it just refuses to take a pic.


... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

My Nikon D-40x has an auto focus that won't auto focus. Becasue it won't focus, it won't take a picture with the lens set to that mode. One day the camera worked fine. I put it up in the closet for about 5 months while working odd hours. Took it down removed it from the case, charged the battery and it just won't work. It died all on it's own....Replaced the battery, same result.


When you store a unit with a battery even if there is no obvious signs of corrosion at the contacts of the battery terminals doesn't mean that there is none on thecircuit board it'self. if you feel comfotable doing this remove the back cover of camer ... Digital Cameras

CAMERA PROBLEMS MY KONICA MINOLTA 7D MAXXUM TAKES ONLY BLANK PICTURES AND CUTS OFF AFTER ONE OF THESE. IT HAS PRODUCED BLANK SHOTS ON THE FIRST PICTURES AFTER IT HAS BEEN CUT OFF FOR A WHILE. NOW ALL ARE BLANK THANKS CATBIRD


This is a known design defect with the 7D - it's called the "First Black Frame". Sony will repair it free of charge. http://www.dyxum.com/columns/other/First_Black_Frame/First_Black_Frame.aspSony will claim not to know what ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Konica Minolta MAXXUM 5D 6.1 MP. CAMERA DOES NOT TAKE PHOTOS POWERS ON, FOCUSES, READS MEMORY CARDS, LCD MENU LOOKS GOOD WHEN PRESSING SHUTTER BUTTON NO PICTURE IS TAKEN ALSO MAKES A STRANGE MECHANICAL NOISE WHEN POWERING ON


... Digital Cameras

I have what seems like a very easy thing to fix, but the estimate I got for fixing it seems much too high ($175). I dropped my Konica Minolta Dimage Z3 camera a while ago and now the battery lid won't stay closed. I need a replacement for that and the camera will be as good as new. Any suggestions? Is this harder than I think it is?


You can quite often find parts or broken camera on Ebay for parts. Only you know what your level of technical expertise is to repair. This is not a hard repair. What you have to ask is the age of the camera worth the cost. ... Konica Minolta DiMAGE Z3 Digital Camera

Stuck Lens My 4 year old got a hold of my Konica Minolta Dimage G6000 and now my lens is stuck half way out. It will not move in or out. When it powers on I get "system error S0042." As I do not have a lot of money I am tempted to take it apart and see if I can fix it, but I don't want to make any problem worse. Any suggestions? Thanks, Todd.


If you have recently dropped the camera you may have damaged the lens\015\012tube (housing). This damage will prevent the lens from moving properly\015\012and will cause the camera to shut itself off after a few seconds. If\015\012the lens is damag ... Panasonic Lumix DMC-LZ2 Digital Camera

Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte


Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

MPEGMovieVX DSC-P200 I dropped this camera in the water last week. When I dropped the camera it was on and ofcourse went out after just a few seconds in the water. We removed the casing and dried the camera out. Everything seems to be functioning normally with the exception of taking a picture. When in any mode, the screen is just black. It's as if there is no light getting into the lens. The screen still shows all of the functionality, I can still adjust functionality, and I can still view pict


There is a sensor behind the lens of your camera that takes light and converts it to electrical signals that in turn is decoded by the board. If the sensor is damaged, there will be no picture to display only what you have in the memory stick. Work o ... Sony Cyber-Shot DSC-P200 Digital Camera

Remove lens hi Iv had a lumix DMC-FX3 for a while now. Just the other day i found a dark spot on the lens. I cleaned the front of it but the spot is still there. I relised that maby the spot in the inside. Is their a way to take off the lens so i can clean it. thanks


GOT IT!!! I had the same problem. Took all of the screws out\015\012of the thing and disconnected the PCB. That allowed me to take the Lenses unit\015\012out. Once I did that, dismantle the Phillips screws from the rear of the lens\015\012and pull th ... Panasonic Lumix DMC-FX3 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

My camera is taking blurry pictures and also the videos are blurry. I have a Konica Minolta Dimage Z2.


Hi there, well seems like the lenses are dirty or have any kind of obstruction (steam or dust) , try first to clean them with whater and make sure are well dry. DON'T USE ALCOHOL OR ANY OTHER OILY FLUID! this will make it worse. if the p ... Digital Cameras

Power Compatibility I have just purchased a Konica Minolta Dimage G600 and will be taking it with me to Spain. The manual says the power cord for the battery charger can be used only in the US & Canada. I'm wondering if the issue is really the cord or if I just need to get an adaptor for the plug.


Look on the power supply or the back of the unit. You will most likely see something like "INPUT 100-240VAC 50-60Hz 15-20VA". If so, then all you need is a plug adapter. If not, you'll need a power converter. ... Konica Minolta DiMAGE G600 Digital Camera

Hi i have a fairley new konica minolta maxxum 5-i hav edifficulty closing the door on the compact flash compartment-it won't slide forward to close and lock-the button i use to ejec tthe compac tcard doesn't lock down-when i try to close the door it pushes the card up-my wife and i struggle to close it-we can't us ethe camera-is there an easy fix-if not, is it exoensive to repair-we only used the camera 4-5 times-thanks-any help or suggestions wil be greatly appreciated([email protected])


If you bring the camera to an authorized service they may replace the door , shouldn't be expensive ... Digital Cameras

Black images MY KONICA MINOLTA 7D MAXXUM TAKES ONLY BLANK (BLACK) PICTURES AND CUTS OFF AFTER EACH SHOT. IT HAS PREVIOUSLY PRODUCED EXCELLENT PICTURES. iS THIS AN INHERENT PROBLEM WITH THIS CAMERA AND HOW DO RECTIFY THE SITUATION


My camera did the same thing, i used it on many fires and took some awesome photos. when my camera went blank on me, i was in a helicopter on a burn shooting like i was working for NGS, it sucks to lose my 7d, good time with it.... ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Dropped camera Though my camera was in a well-padded case, the contact with the cement in the metro-station was too much. Should I bother paying $211 for a Sony authorized dealer to even look at it, or should I apply the $211 to a new camera? The camera turns on but no longer takes pictures and won't shut off unless I remove the battery. My thanks in advance.


Hi\015\012first of all: ouch!!\015\012sounds like the chip got bumped....\015\012this is a very good cam with good zoom and Megapixel\015\012you wont find any cam like this in twice the dealer service charge \015\012in the other hand it can cost you\ ... Sony Cyber-Shot DSC-F828 Digital Camera

CDR question When using my CDRW with CDR floppies, I can only save once and then the CD is cosidered "full" and can only be used as an archive. This being the case if I were using a SONY MAVICA MVCMVC-CD1000, how would I continue to save to the same floppy during more than one session or once removed can no more data be saved to the same floppy. I can only take 8-12 photos and the camera tells me the disc is full. I know that a disc has more capacity than that! How can I correct this pr


CDR is a one use diskCDRW is a rewritable diskIt's not the drive that determines whether or not you can re-write a disk, it's the media itself.Get yourself some CDRW's ... Sony Mavica MVC-CD1000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2915 seconds