Having problems with your Konica Minolta DiMAGE X Digital Camera ?

Front case has a dent in ,below the shutter ,? pictures dont seem as good, is it a simple task to remove front of casing to remove dent , ie 4 screws on rear?(or will it all fall apart)


Answers :

Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics.

If you can afford another camera and are willing to take the risk of taking it apart, it may be worth the experience.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE X Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Front case has a dent in ,below the shutter ,? pictures dont seem as good, is it a simple task to remove front of casing to remove dent , ie 4 screws on rear?(or will it all fall apart)


Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics. If you can afford another camera and are willing to take the risk of taking it apart, it may be worth t ... Konica Minolta DiMAGE X Digital Camera

Konica minolta x1 dent in front case, how easy is it to remove the front case to take out the dent.?


Not easy and not worth it. If it works, leave it alone. ... Konica Minolta DiMAGE X1 Digital Camera

I have a Minolta f300 camera whith an internal battery that needs to be replaced. Sending it to Minolta (Sony now) would require a flat fee of $181 which is of course morethan the value of he camera. I can remove the back case but the front case, which covers the internal battery, seems to be attached to the telephoto lens and does not seperate easily from the camer's internals. I don't want to force it and break something. What is the procedure for removing the front case? Thanks


I just took my entire camera apart so if you still need to know how to do this you can email me at [email protected] the ring around hte lense pops off and there is a screw in the ... Digital Cameras

I have a new Nikon -COOLPIX-8.0 Megapixels,VR & iso2000,2.5 inch LCD camera.It was dropped accidently and the Shtter fixed to the rotating less has come out.And When I operate the camera I get the Indication"LENS ERROR". I do not find any good realiable service Centre here.I intend to do it my self. I am both a technician and a highly qualified Engineer. WhenI by removing the screws I could only open the backcover and I could remove the front cover.Can you indicate how to remove the front cover


Welcome sir when u have confidence u will be better then kamalesh of chennai, while disassembling the camera,discharge the flash capacitor,and take precautions of static electricity,open the lens unit stp by step, and assemble,the camera ... Nikon Coolpix S210 Digital Camera

Have a lumix DMC-FC20 and began to hear a noise as if there was a loose part... I am familiar with the stability mechanism and was aware camera movement can result in a noise that sounds similar to a loose part but the noise continued even if the camera was powered-off. My curiosity got the best of me and I removed the screws on the casing and opened the back to confirm that there was a loose screw approximately 1/4" long. I have no idea where the screw came from since I could not easily remove


... Panasonic Lumix DMC-FZ20 Digital Camera

Olympus D-600L Lense tries to open & shutter won't work. Firstly, Batteries are properly charged. The Zoom works, the SLR viewer is closed. When holding down the button it sounds like the camera wants to activate the shutter. I tried to remove the case but even after removing all the screws I still could not loosen the case. Any help would be appreciated.


... Olympus D-600L Digital Camera

Olympus 570uz is not working and is not worth the cost of professional repair (as told to me by Olympus), so I'd like to take apart and see if I can get lucky fixing it myself. Otherwise, it's a paperweight. Can anyone tell me the secret to removing the back cover? All discernable screws have been removed, but it's getting hung up by the hot shoe and flash. My next step is to take out an x-acto blade and start cutting, so please let me know the secret. Tried finding a repair manual online with n


The hot shoe is held on by screws which are concealed by a thin plate. You can pick this out with a pair of tweezers (you have to sort of un-hook the edges) to reveal the screws. ... Digital Cameras

I bought a replacement LCD screen, but when I remove the back case, the connector for the LCD is *under* the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir fishiemnma, remove the broken LCD display lifting it up carefully of retention plate.You did not make? will you have access to the connector afterwards.Regards ... Nikon Coolpix S3000 Digital Camera

My OLYMPUS C5060 WIDE ZOOM digital camera fell in to the sea, in its pouch, but still got slightly wet. Local service agents answer was: buy a new one. How can I open the camera? I have removed all screws from the case but it will not come loose around the external flash support, I dont see any way to remove the external flash support.


Having been exposed to salt water this long they were right.There is probably a pin you need to remove with the back off holding the flash.It may have to be pulled out with needlenose pliers or it may be springloaded and need one of the ends pushed d ... Olympus Camedia C-5060 Wide Zoom Digital Camera

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

How do you get the case apart?


You have to remove the shutter button assembly first. Please see the following for a similar A70:\015\012\015\012http://www.thustra.com/A70mod/\015\012 ... Canon PowerShot A75 Digital Camera

How do I remove the front casing from my Panasonic LX2


Digital cameras are constructed to be disassembled from the rear of the camera. Therefore, to get to the lens assembly or other part, it must be taken apart from the rear, and totally disassembled. If you're having a problem with the lens, there ... Panasonic Lumix DMC-LX2 Digital Camera

I'm trying to take my digital camera apart. I've removed all the screws, but the back will not come off at the top.


Carefully inspect all areas, such as usb compartments, and the battery compartment. They tend to hide screws whenever they can, and one missed screw will hold the back on. I know on the old Olympus cameras,they would put one in the usb port compa ... Olympus SP-550 UZ Digital Camera

I want to take my samsung l210 camera apart. I've removed the five screws but the top must have some type of clip I need to remove.The lens is stuck half open so want to see if something is stuck in the gears.


... Samsung L210 Digital Camera

Lense Issue When I turn on the camera the lense started to move out and then got stuck. How when you turn it on it just trys to adjust the lense but again it is stuck. I am required to remove the batteries to get it to shut off. I was going ot open the case but three of the screws requires a nice special allen wrench, but guess what, they did not provide it. Any ideas where I can score one?


Does the screw you need to remove look like a triangle with 3 points? if it does i had the same problem! went to all kinds of repair stores looking for one, turns out that is a manufacturer only tool so that we cant repair them and we have to have th ... Fuji FinePix S3000 Digital Camera

Need to remove case to access CCD coupling which appears loose (pic blacks out and reappears if lens is pushed in). All obvious screws out - back panel still holds fast at top near viewfinder.


Google the words...disassemble a digital camera. ... Kodak EasyShare P850 Digital Camera

When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but


Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera

Trying to remove front housing - EasyShare Z712IS to replace it with new one. Have taken out all screws - housing not coming off. Is there a secret?


Hello,check for hidden screws under all labels and covers that come off, if the lens is removable check there as well. When you are absolutely sure that there are no screws on the outside anymore, the casing will be held together with pla ... Kodak Digital Cameras

Taking apart a A530


Leave the mode selector wheel alone. It is not necessary to remove it. Take a look at the following A530 disassembly guide. It should be of help:\015\012\015\012 ... Canon PowerShot A530 Digital Camera

I have a replacement LCD display for my Finepix S1000 FD camera. I can remove all the screws, but the cover will not come off. There are two small screw like pins on the bottom on each side of the tripod connection but they are not standard tips. Can you give instruction on how to correctly remove the cover. I am fairly hardware proficient as I service pc's and printers.


... Fuji FinePix S1000FD Digital Camera

Hi, I dropped my A650 and the case is dented although the camera works fine. Can I buy and fit a new case? It's dented around the flash. Thanks


No, you would have to send the product to Canon for repairs, and it would most likely be cheaper to just buy a new camera. I hope this helps! ... Canon PowerShot A650 IS Digital Camera

My camera will power on only with the front of the body off. I have the front of the body/face plate, 6 small screws and a tiny paper punch sized piece of thin foam out. Everything else is assembled. It will fire up and take pictures without the front of the body/face plate on but as soon as I put it together, it will not work any picture taking functions only the review and set up functions will work. I can also fire it up with the front face plate off replace the front face plate and use the c


... Sony Cyber-Shot DSC-W5 Digital Camera

Battery Cover Coolpix L11 Removal


... Nikon Coolpix L11 Digital Camera

I have fungus on the inside of the front element of the 50mm lens [rb67]. I know one can obtain the front element group replacements BUT how do you remove the front element grouping? Hope you can help.


I hope you're not thinking about doing the job yourself. ... Digital Cameras

Screws Missing The two screws which hold the casing together on the right hand side by the line in and out ports have fallen out. Everything is wobbling now. Is there ANY way and where any how I can find replacement screws? Thanks Tony [email protected]


Same issue here although there has not yet been any effect on function. I do quite a bit of underwater photography and the images have remained very good without the screws.\015\012\015\012The parts people at Pentax Imaging in Golden Co w ... Pentax Optio S5i Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0513 seconds