Having problems with your Konica Minolta DiMAGE Z10 Digital Camera ?

Printer Problem - Konica Minolta 7450

\015 Hi I was wondering if you could help me with a printer problem I am having...\015\012Everytime I print a document with blue colours in it, there is a blurry line of darker colour across the entire page (front and back). It is about 5mm in thickness.\302\240I have changed to a brand new color cartridge and it still happens.\302\240Please help this is URGENT!!\302\240 Thank you.\015

Answers :

If the print is a dismal gray rather than a sharp black, you are\015\012 probably almost out of toner. This can manifest itself evenly across the\015\012 entire page or in splotches or stripes, depending on the printer.
Sometimes you can wring a little bit more out of a toner cartridge by\015\012 taking it out and gently shaking it from side to side (never up and down,\015\012 as toner can spill out). You can also try turning up the printer’s\015\012 contrast adjustment, if it has such a knob (usually on the back side if it\015\012 exists). Faded print can also result from a dirty corona wire, because a\015\012 dirty wire inhibits a full electrical charge from being passed.
If the printouts are consistently varied in density, and you have to\015\012 frequently remove the toner cartridge and shake it to redistribute the\015\012 toner inside it, make sure the printer is sitting on an even, flat\015\012 surface.
Horizontal lines
\015\012
A horizontal line on the printout is probably the result of a\015\012 dirty or damaged roller. There are lots of rollers in the printer, and you\015\012 can use the space between the lines on the page to determine which roller\015\012 is causing the problem. Measure the distance between the errant \015\012 lines on the page and then use Table A to determine which part\015\012 might be causing the problem.\015\012 \015\012\015\012 \015\012\015\012 \015\012\015\012 \015\012\015\012 \015\012\015\012 \015\012 Table\015\012 A
\015\012 \015\012 \015\012\015\012 \015\012\015\012 Distance\015\012 between lines
\015\012 \015\012\015\012 Faulty\015\012 part
\015\012 \015\012 \015\012\015\012 \015\012\015\012 0.5”
\015\012 \015\012 \015\012\015\012 Registration\015\012 assembly
\015\012 \015\012 \015\012\015\012 \015\012\015\012 1.5”
\015\012 \015\012 \015\012\015\012 Upper\015\012 registration roller
\015\012 \015\012 \015\012\015\012 \015\012\015\012 1.75”
\015\012 \015\012 \015\012\015\012 Lower\015\012 registration roller
\015\012 \015\012 \015\012\015\012 \015\012\015\012 2.0”
\015\012 \015\012 \015\012\015\012 Toner\015\012 cartridge developer roller
\015\012 \015\012 \015\012\015\012 \015\012\015\012 2.56”
\015\012 \015\012 \015\012\015\012 Lower fusing\015\012 assembly roller
\015\012 \015\012 \015\012\015\012 \015\012\015\012 3.16”
\015\012 \015\012 \015\012\015\012 Upper fusing\015\012 assembly roller
\015\012 \015\012 \015\012\015\012 \015\012\015\012 3.75”
\015\012 \015\012 \015\012\015\012 Toner\015\012 cartridge photo drum
\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 Regularly spaced splotches
If there are evenly spaced black spots but they don’t extend all the\015\012 way across the page, the problem is probably a scratch or flaw in the drum\015\012 or a build-up of toner on the fusing roller. If the spots are less than\015\012 three inches apart vertically, it’s probably the drum, because the drum\015\012 has a larger diameter than the fusing roller.
Vertical line on edge of page
This can indicate an almost empty or faulty toner cartridge or (less\015\012 frequently) some spilled toner inside the printer.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE Z10 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte


Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Printer Problem - Konica Minolta 7450


If the print is a dismal gray rather than a sharp black, you are\015\012 probably almost out of toner. This can manifest itself evenly across the\015\012 entire page or in splotches or stripes, depending on the printer.Sometimes you c ... Konica Minolta DiMAGE Z10 Digital Camera

Konica Minolta Z6--stopped being recognized by my computer and Picasso3, tho devices & printers sees it


... Konica Minolta DiMAGE Z6 Digital Camera

My konica minolta dimage g530 is giving me problems. When taking pics outside, only a white screen appears, no picture. When taking a pic inside, I do get the image I shot. The setting are the same inside as well as outside. I have had this camera for several years and never had any problems. What is going on with my camera and can this problem be fixed?


... Konica Minolta DiMAGE G530 Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Have you formatted the cards in the camera or in the computer? ... Konica Minolta DiMAGE A2 Digital Camera

Hey Guys, whenever I connect my Konica Minolta DiMAGE X60 to my PC (WinXP, Service Pack 3), I receive the following error message: "Power Surge On Hub Port". I already checked the internet to solve the problem, so I know how to get rid of the message box. But it doesn't solve the problem... I also tried to reinstall the drivers for the USB ports. Need help!


When i connect my KonicaMinolta Dimage 60 to my computer. camera does not go beyond Initialization. Has anyone had this problem? ... Konica Minolta DiMAGE X60 Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Hi.If you already tried several memory cards, then it looks like the problem is the camera.To ensure you can go to a camera shop and ask them to test it, but if you already tried several new cards (ensure size of card is with ... Konica Minolta DiMAGE A2 Digital Camera

Konica Minolta Dimage A200 problem - iris ng please power off Happens after I have taken one or two fotos Please ca you advise what the problem Thanks very mich Rose


... Konica Minolta DiMAGE A200 Digital Camera

I have been given a Konica Minolta Dimage E500 camera as a present. My old camera a Hewlett Packard had images stored on two SD memory cards. My Konica will not show these images. When I try I get a message on the screen saying 'Picture Error'. How can I overcome this problem?


... Konica Minolta Digital Cameras

Konica minolta dimage x60 problems


Just a suggestion, I have same X60 and no cable. Instead, transfer all of your pictures to the Memory card and use the Mem card unto a card reader going to your PC. ... Konica Minolta DiMAGE X60 Digital Camera

Konica minolta dimange x50 problem..


Please advise, my dimage x50 wont focus clearly pictures are blurred is there a way to correct this? ... Konica Minolta DiMAGE X50 Digital Camera

Konica minolta dimage z6 problem


My mode switch also failed. As an electronics tech (retired), I was able to source the proper part, and replace it. The camera is perfect again. I have more of those switches in stock. ... Konica Minolta DiMAGE Z6 Digital Camera

My Konica Minolta Dimage A200 do no recognize the memory cards. Can anybody help e to solve this problem?


Format the cards in the camera. Make sure you download any pictures that might be on the cards first. Use a card reader if necessary. ... Konica Minolta DiMAGE A200 Digital Camera

I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it ?updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?


... Konica Minolta DiMAGE Xi Digital Camera

I have Konica Minolta Dynax 7D and the following problem; one moment the shutter works, and the next moment after shutting the camera down and back on it refuses to take a picture. The focussing works asif everything is normal but it just refuses to take a pic.


... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

CAMERA PROBLEMS MY KONICA MINOLTA 7D MAXXUM TAKES ONLY BLANK PICTURES AND CUTS OFF AFTER ONE OF THESE. IT HAS PRODUCED BLANK SHOTS ON THE FIRST PICTURES AFTER IT HAS BEEN CUT OFF FOR A WHILE. NOW ALL ARE BLANK THANKS CATBIRD


This is a known design defect with the 7D - it's called the "First Black Frame". Sony will repair it free of charge. http://www.dyxum.com/columns/other/First_Black_Frame/First_Black_Frame.aspSony will claim not to know what ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Lcd Screen problem - Konica Minolta DiMAGE Z5 Digital Camera


Plz elaborate your problem ... Konica Minolta DiMAGE Z5 Digital Camera

My Konica Minolta dimage z25 camera cuts itself off when I switch to the camera mode. New batteries do not solve the problem. Any ideas?


... Digital Cameras

How can I format the SD card on the PC? I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?


The SD card must be formatted in the camera, not the computer. ... Konica Minolta DiMAGE Xi Digital Camera

Black images MY KONICA MINOLTA 7D MAXXUM TAKES ONLY BLANK (BLACK) PICTURES AND CUTS OFF AFTER EACH SHOT. IT HAS PREVIOUSLY PRODUCED EXCELLENT PICTURES. iS THIS AN INHERENT PROBLEM WITH THIS CAMERA AND HOW DO RECTIFY THE SITUATION


My camera did the same thing, i used it on many fires and took some awesome photos. when my camera went blank on me, i was in a helicopter on a burn shooting like i was working for NGS, it sucks to lose my 7d, good time with it.... ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

DARK PICTURES I just bought a Konica Minolta X1 DiMAGE digital camera. But I bought it used. It looks brand new and the seller had everything that came with it originally including the original box.So far, I have been extremely disappointed with it. ALL od the pics I have taken with it are very dark. I have tried every setting on the flash and it makes no difference. And it does it inside or outside. Could the problem be the lithium-ion battery? The battery gets weak fairly soon after powering t


I am afraid the shutter is faulty, which means it does not get enough light from the image, however it will still print the image but not in natural light, battery is not an issue here, you can try changing new battery but i don't think the image wil ... Konica Minolta DiMAGE X1 Digital Camera

Konica Minolta DiMAGE 7i Digital Camera Problem


I just found a solution to my camera problem. It turned out to be the\015\012batteries. We purchases some Rechargable Duracel with a 2650mAh rating.\015\012After charging the batteries I put them in the camera and it started\015\012right up and was t ... Konica Minolta DiMAGE 7i Digital Camera

White Screen I am using Konica Minolta DiMAGE X50.I accidently dropped the camera from the chair.When I start the camera now , the screen appears to be completely white and I cannot see a single color.The screen remains white even when I preview pictures.When the camera is slightly tilted I can make out informoation on the screen reagrding battery level,current mode,present on the sides. What is the nature of this problem ? and can I solve it ? Thanx


Did you find a solution for this? I'm trying to find which LCD would work on this same camera. ... Konica Minolta DiMAGE X50 Digital Camera

Stuck Lens My 4 year old got a hold of my Konica Minolta Dimage G6000 and now my lens is stuck half way out. It will not move in or out. When it powers on I get "system error S0042." As I do not have a lot of money I am tempted to take it apart and see if I can fix it, but I don't want to make any problem worse. Any suggestions? Thanks, Todd.


If you have recently dropped the camera you may have damaged the lens\015\012tube (housing). This damage will prevent the lens from moving properly\015\012and will cause the camera to shut itself off after a few seconds. If\015\012the lens is damag ... Panasonic Lumix DMC-LZ2 Digital Camera

Am I able to use a 2GB SD card in my Konica Minolta Dimage G400 camera or could this cause problems.


This camera has been discontinued, and is no longer sold as new. There are still vendors that sell accessories for this camera including batteries and SD memory cards. A google search of "dimage g400 memory" reveals a number of retailers that sell ... Konica Minolta DiMAGE G400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1029 seconds