Having problems with your Konica Minolta DiMAGE Z20 Digital Camera ?

My Dimage Z20 can't upload photos onto my computer anymore. It used to show up as a drive on "My Computer", now it doesn't. Is this a problem with power cord? Camera works fine.

Answers :

It could be - or it could be a problem with the PC.\015\012
\015\012Connect the camera to the pc, go into device manager (right+click on My Computer> down to Device Manager) and see if it is registering a problem.\015\012
\015\012Delete the camera from device manager (highlight it, press DEL), disconnect the camera from the PC. Power cycle the camera, then connect it back up - you should see the computer finding the camera again.\015\012
\015\012If not, check a different computer or buy a new cable,
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE Z20 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Dimage Z20 can't upload photos onto my computer anymore. It used to show up as a drive on "My Computer", now it doesn't. Is this a problem with power cord? Camera works fine.

It could be - or it could be a problem with the PC.\015\012\015\012Connect the camera to the pc, go into device manager (right+click on My Computer> down to Device Manager) and see if it is registering a problem.\015\012\015\012Delete ... Konica Minolta DiMAGE Z20 Digital Camera

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss

Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please

Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

Power problem at first, my problem was the error 99 and i waited a couple of months not repairing it and now i have this problem which is when i use my camera it's working fine with no-flash mode and then when i use it again after a while ( say couple of hours) the camera doesnt turn on and i need to charge the battery again!! PS:i have bought my camera before 11 months!! please help.

Per the symptoms that you describe, it seems that one of the two internal printed board circuit parts have a defective component that is draining out the battery current.\015\012\015\012If you have only 11 months with it, I strongly recom ... Canon Rebel XT / EOS 350D Digital Camera

I normally use a small 32mb memory card in the olympus D-390 but used an olympus fe-130 over the holidays with a 256mb memory card. I do not have the usb cord for the fe-130 so I put the 256mb card in the d-390 camera and plugged it into my computer to load up my photos but I get a blue screen on the camera with options of Power off or format. Is the card too big for the camera? it works fine in the other to let me take photos and view them, if I had the cord for it or went to a store to print

Many cameras will not read cards written on other, different cameras. There should be no problem taking the card to a store and having the pics printed or put on a disc. Or get a cord for the 390, or a card reader for your computer. ... Olympus Camedia D-390 Digital Camera


... Digital Cameras

Plug in Fuji FinePix 440 camera and autoplay doesn't come up. Not visable on My Computer drives. All other USB items - printers, storage devices, etc work fine. It has worked fine in the past and is a new problem. Running Vista.

I am getting a zoom error message fuji 440? ... Digital Cameras

I have an Olympus X-44, its new and worked fine, but since I had to install a new hard drive this and another digital camera shuts down my computer everytime its connected to my pc, I need the cameras for work and this is causing a great deal of difficulty I need the photos urgently, there are no error messages, there has been a couple of times there is a no connection message but not every time, there has been no problem with any other connection and I use printers and franking machine etc. C

Obviously there is a camera firmware issue. You said you have printers can you see if one of the printers has a set of memory card readers for "Direct Printing these look like Odd looking USB ports but memory cards plug into them. You can use one of ... Digital Cameras

Hello! I have a Kodak Easyshare C713 camera. It turns on, has plenty of battery power and works just fine. But I have a USB cord for it to transfer pictures, and whenever I plug it into my laptop, the camera turns off immediately, and wont turn back on, so it's impossible to transfer my pictures. What is my problem?

It is the way it is, the cam will be blank or black when connected to PC...just turn it on then you will receive a transfer window on the computer. ... Kodak EASYSHARE M1063 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

Can't see the camera from the computer. Everything works fine on the camera, but the USB connection doesn't work. It's like the usb driver chip failed.Put it on a linux machine, and can't see it from there either. I have reloaded the drivers several times. And it used to work on this computer. Other types of cameras work correctly with the same cable so it doesn't seem to be a cable problem. Does anybody fix these cameras?

Change the USB Configuration setting to Disk Drive in the Setup Menu. This allows the camera to appear as another disk drive on the computer so that you can easily copy the image files from the camera to the computer hard drive. ... VuPoint DC-ST300-VP Digital Camera

My camera used to downlad pictureas before just fine to my computer. Now it wont work. I tried it on my parents computer and it worked. The camera cord works and the camera itself, but why wont it download to my computer anymore?

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Nikon Coolpix L11 Digital Camera

I have a canon A590 is camera. When I try to upload pictures onto the computer and plug the camera into the computer nothing happens.The camera does not power on like its suppose to. Why is this? I know the Usb cord works because I tried it on another camera. Do I need to have the cord that came with the camera or can I use any USB cord. Thanks you

Your USB cable is fine, I use a generic cable with my A590 with no problems. Connect the USB cable to the camera then your computer, make sure that the camera is set to the view setting instead of picture taking setting and then turn your camera an. ... Canon PowerShot A590 IS Digital Camera

Hi. I have a Canon G9 camera. I bought in October 8, 2007 but did not register the camera's warranty until a few days ago. Here's the problem. I dropped the camera a weeks ago... Everything was working fine, no problems. After I bought an extra battery I tried turning the camera on but would not power up. In fact will only power on if I insert and remove the battery several times. Once I get it going, however, it powers off with the lens extended. Please tell me what my options are, s

Hi Cacy,\015\012I don't want to offend you, please don't take it that way, but since your problems began with the addition of the new battery... I have to ask the question. Are you absolutely sure you bought the right battery for your camera? ... Digital Cameras

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery

Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

Card Problem When I put my card in it goes to (card set up) power off or format????? I have tried everything and cannot get rid of this I cannot take pictures. It was fine until I put card in computer and downloaded the photos, put it back in camera and now this is all I get, it is driving me crazy,,,,,,what is wrong??? I have even put new batteries in please help ASAP. [email protected]

Hey abbers,\015\012 What is most likely going on is your computer formatted the card to it, and the card needs to be formatted to work in the camera. What you should do is choose to format the card when you get the me ... Olympus Camedia C-3020 Zoom Digital Camera

I have an SVP XThinn-8068 digital camera which works fine until I download photos to my computer. That seems to **** the power out of my batteries (I'm using lithium). How can I fix this problem?

Buy a card reader if you don't have one, then remove the card from the Camera to download the pictures.This way it is faster and will not use the power of the camera at all.Hope this helps. ... SVP Digital Cameras

Picture distortion i take the pictures and they are fine on my camera, but when i load them on to my computer the color is distorted and it looks like a puzzel with pieces in the wrong place. i don't know if it is a camera, cable, of computer problem. it worked fine for about 2 months and i can't figure out the problem

Check your battery, if your battery was low it may cause picture distortion. ^_^ ... Sony Cyber-shot DSC-W80 Digital Camera

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe

Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s

Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras

Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor

... Panasonic Lumix DMC-LZ1 Digital Camera

I seem to be having problems connecting my Fujifilm Finepix J210 with my computer. When the hardware wizard auto intalls the drivers it shows a message that there may be problems using the hardware. We have tried updating/changing the driver which makes no difference and we know that there is no issue with the camera as it works on another computer. We have also tried other cameras/memory cards on THIS computer and they work fine.

... Digital Cameras

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.

It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

My Nikon Coolpix L18 wont allow me access to the photos on my camera through my Windows XP computer that has the software but it works perfectly fine on my Windows Vista computer that doesnt have the software. Have reinstalled software twice and reset the computer multiple times AND the Nikon transfer program doesnt work on my XP version

Use a card reader to download your pics. ... Nikon COOLPIX L18 Digital Camera

My photos won't transfer to my computer. The the last time I loaded photos onto my computer which was last week, it worked fine. however today the same computer says it does not recognize the USB device, so the camera wizard will not come up. I work in a office so in tried several different computers, none worked. some say usb not recognized, some say there is a power surge at the hub, whatever that means. So bottom line is I'm not able to get my photos onto a computer. What changed since last w

Change the USB port. If you are connecting it to front USB of your computer, try connecting it to USB port at back of computer.. \015\012\015\012The cable might be fauty. ... Kodak EasyShare C330 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 5.8290 seconds