Having problems with your Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera ?

No images show up on screen after shutter releases


Answers :

If the images are recorded on the card but not shown immediatly after the shutter release, press MENU, go with the control dial to the recording menu (the one symbolised with a camera) and press AF, the center knob.
\015\012On page 1, the third item controls the instant playback, it can be set to OFF, probably your setup, 2, 5 or 10 seconds.
Repair Help & Product Troubleshooting for Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nikon d80 - most of the time memory card access lamp flashes and shutter release button doesn't trigger shutter. Sometimes it will stop blinking and camera will fire. Sometimes when it fires it will not show a preview image. When malfunctioning I can not bring up menu screen or access any features (shutter speed, f-top, or review screen. Have tried different memory cards, and lenses with no change.


Hi pantha. Turn it on and go into the menu and find the reset function. Reset it. This will merely set it at all of the parameters it was set at in the factory. IF this reset does not solve ALL of the problems, then you will have to take it or sh ... Nikon D80 Digital Camera with 18-135mm Lens

No images show up on screen after shutter releases


If the images are recorded on the card but not shown immediatly after the shutter release, press MENU, go with the control dial to the recording menu (the one symbolised with a camera) and press AF, the center knob.\015\012On page 1, the third ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

I have just bought a Lumix FZ18 camera (July 08). It worked perfectly on all settings at first, but has now developed an apparent fault in which it shows an overexposed image on all settings apart from automatic. When the shutter button is partially depressed, the image in the viewfinder or on the screen shows as normal, but when the shutter is activated it immediately reverts to over-exposed and the resulting image is the same. Can you advise please


Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. Fix #2: Remove the bat ... Panasonic Digital Cameras

Dark exposure I have a Nkon D40x. Setting the selector to Auto, Shutter or Appature(SP) the image comes out dark. The historgram shows a spike that is totally contained in the first quarter of the screen. When I use the manual setting the image improve as the shutter speed was slowed down (1/80sec and ~7f the image improves). Any guess as to what is happening?


Check your ISO setting...should be between 100 to 400 for normal pictures.Did you change your exposure compensation setting to something other than "0"? Is the aperture ring on the lens set to the "A" position? ... Nikon D40x Digital Camera

Hi, the flash card card-eject lever spring is broken and wont eject the card. u have to manually push the card in place and pull the card out. the lever stays up until u shut the card slot door.once the card is in place the camera can read the card if images already exist. but...it will not record an image and shows up as blank on the screen after the shutter takes the image? is this the cause of the broken eject lever. thanks.


I have the same problemI think that the reason that the not record the image is that the card slot door is pushing down on the card eject lever and ejecting the card when the door is closedThe only answer I can think of is to shorten the leverdavidh ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.


I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

On the lcd screen it shows "error press shutter release button again" and i do and it wont take a picture and shows error message again.


Reset the camera by taking out the battery or by reset button. ... Digital Cameras

LCD does not display photo but shows settings, menu etc. Downloaded "images" show as black on computer screen but photo data is available as if the photo had actually been taken. Flash works and shutter sound effect works. Have read that there is a potential latent defect that gives rise to this problem.


This is a known manufacturing defect and Canon will fix it for free. Look for the notice and instructions on the Canon website. ... Canon PowerShot A85 Digital Camera

My camera was working fine for about a year. Then one day i turned it on and the screen was black but it shows the grid and date and time also it shows the menu and the differnet scene selections. If i take a pic the flash works and the sound works, but no image just black and the time and date. i think its the shutter that is stuck?? How to fix this?? Not under warranty anymore.


Take the camera andturn off the flash. Point it toward you and take a picture. Look in the lens to see if you see the shutter activate. If you dont see this work, then your shutter may very well be stuck. \015\012\015\012There isn't reall ... Olympus FE-310 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Camera: Sony A100 Doesn't power up from internal batter ( just blincking of power up red indicator, all other functios dead) Powers up from DC adapter Display shows "bulb" No focusing No shutter release Full access to menus Records blank image to memory card ????????????? HELP, please... with regards/Peter Bacler


... Sony Alpha DSLR-A330 Digital Camera

Connected a cable release the first operation of which has caused the shutter to "freeze". Error message reads r07. Display screen showing other functions such as auto focus, exposure readings,file size, memory card details etc to be ok. Have removed & reinstalled batteries without success.


1. Try removing the lens, fire off a few shots to confirm the mirror flips up and the shutter opens.\0122. If that doesn't work, go into the menu and find "reset". ... Nikon D70s Digital Camera

Camera was not used for at least one year. With FRESH batteries, it shows an extemely blurred purple image on the LCD screen, before and after pressing the shutter. Any ideas?


Not sure this qualifies as a solution; LCD screens are sensitive to high heat, so if the camera was, let's suppose, left in a hot car, the LCD might literally be cooked. This may not effect the ability to take photos, as that is a different, but lin ... Canon PowerShot A75 Digital Camera

LCD Black I went to turn on my camera and everything turned on normally( shutter opened). When we lookied at the LCD screen it is black but the icons show up. We can change setting. If you take a picture the way it is now the picture turns out black. I cannot see any images in the LCD at all. All pictures taken now are black.


Swith off the Camera and gently tap the bottom(tripod hole side) to a hard surface, I was lucky and it worked for me for the same kind of problem. ... Konica Minolta DiMAGE E500 Digital Camera

My 6230 won't show an image in the view screen , as though the shutter is stuck closed, can't afford a new camera, HELP!


First of all, make sure your battery is fully charged, and that it's contacts and the camera's contacts are clean (you can clean them with a qtip and alcohol). A low battery or one with a shorted cell would not have the voltage requirements the LCD ... Kodak EasyShare CX6230 Digital Camera

Minolta Maxxum 7D, shutter won't release, frames remaining counter shows 0, M.M.-3 flashing on main screen.


... Digital Cameras

I dropped my Nikon D5000 (while still in the padded case) and now it will not shoot any pictures (shutter-release pressed, noise is made but it will not actual take the picture) nor will it record any video. It is not showing any errors in the viewfinder or the screen. Any assistance would be greatly appreciated.


You need to take the camera to a repair service. If you dropped and the curcuit or a connection got broken, yiu may damage your camera by trying to use it. ... Nikon D5000 Digital Camera

Dropped Olympus SP-310 in water for 2 seconds. After drying out everything works except for a dark LCD when attempting to take a picture. Focus green light flashes and shutter will work, but no picture is recorded. Replay shows black screen images.


If your device gets covered in water, act fast and rationally, and you may be able to save your device. \015\012 \015\0121. DO NOT TRY TO TURN IT ON\015\0122. Pull out the battery. ... Olympus SP-310 Digital Camera

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

Blank screen For some reason the LCD of my ixus 70 won't show me my images. It's still capable of showing color and stuff but when you take a picture, the screen just shows the menus but remains blank. I can't see the images after I've taken them either. Anybody know what's going on?


Did you press the disp. button? ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon Powershot A570 digital camera I had around 250 images in my memory stick, but all of a sudden when I tried to click another photo, all the images disappeared and showed the last picture clicked 1/1 on the bottom left corner on the display, but the top right hand corner had 1/250 but I couldn't see the images on the screen. I tried going into the menu to see if I could access thoses photos, but it showed change battery and had taken me to the Format screen without me have clicked any


As all your photos are stored in your Canon digital camera's memory stick you could tryCard Data Recoverywhich will help you recover pics without casusin ... Digital Cameras

I can view the images taken, but when I try to take an image the LCD screen does not show the image, screen is black


Hey my camera just did the same thing, have you tried replacing the batteries - i thought it couldnt be the batteries because the playback screen still showeed up just not the one to take photos but i just put in newly recharged ones and it can take ... Fuji Finepix S6500FD Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual


In full manual, yes it should. ... Digital Cameras

I dropped my camera and since then I can take photos, the camera focuses, my display is fine when viewing previously shot images and the normal display information but when the shutter is pressed all o see is black. I don't know if the images are being taken or if they aren't. I tried taking of the lense and pressing the shutter and a black box with a **** of light shows. With the lense on nothing but black shows. Is this issue with the lense or body? Any feedback is appreciated.


When you take off the lens and fire off a shot, does the mirror go up and return or does it stay up? If not, is it possible that it is staying up when the lens is connected? When you fire a shot, can you hear it returning? ... Canon EOS 400D / Rebel XTi Digital Camera

My nikon d3000 showing error press shutter release button again. iam pressing the shutter release buttion iam any change it is showing me the same sign again and not abel to capter photos.


I had the same problem. After looking up information on google, I found a very good solution. But be aware, it requires you to open the body. So, you'll need a set of very small screwdrivers, make sure you take one that fits perfectly to the screws. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2086 seconds