Having problems with your Konica Minolta Maxxum 7D / Dynax 7D Digital Camera ?

Sometimes the image captured on my Maxxum 7D has an intense magenta hue. Continues for a few frames, then goes back to normal color image capture. Ant ideas as to what's happening?

Answers :

Repair Help & Product Troubleshooting for Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sometimes the image captured on my Maxxum 7D has an intense magenta hue. Continues for a few frames, then goes back to normal color image capture. Ant ideas as to what's happening?

I have this same problem. If you get a solution, please let me know. [email protected]\015\012\015\012Thanks! ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Screen on hd1a goes green and camera freezes when ending a movie capture. Tried several cards (all sdhc). Still images store fine - problem only occurs with video. It began as an intermittent problem but happens all the time now. Camera appears to be operating normally until you end the capture.

It seems like the firmware need update. You don't need to replace anything just check with a Sanyo repair guy and upload the firm ware. that should fix the issue.Also let me know if the issue comes up even when you are taking small clips or it ... Sanyo Digital Cameras

Blank Screen I have just bought one of these cameras and when you open the shutter to take a photo there is only a blanks screen. I have a second of these cameras so know this is when the camera should 'roam' ready to take a snapshot. If I click the button to capture an image, it is stored and I can see it, but then it goes back to a blank screen. Any ideas :)

Some have a view button which you can choose to put in "black mode". happens a lot. take it to your local camera shop if they know anything they should be able to put it right in seconds ... Olympus MJU 400 Digital Camera

If switch ON power the liens move out in normal position stop and goes then to the macro position stop and goes back to start position. This happens 3 times and then the power supply goes OFF.

Hi.It is probably lens error. The lens try extending, as they cannot reach full extension they retract until the camera shuts down.First\015\012 step is resetting the camera by removing battery for one minute. Ensure\015 ... Olympus FE-340 Digital Camera

I have a Canon S30 digital camera and a Macbook running OS x 10.5.8. I use a San Disk USB card reader to download the images to my computer and when I do, the images look normal when they are at thumbnail size, but when I open them they are distorted, cut up into horizontal columns, discolored, and rearranged vertically. This happens whether I use iPhoto, Image Capture, or go directly from the device onto my desktop. I have not downloaded any Canon software or drivers onto my computer, that may

One thing to remember is that most digital cameras capture an image and a thumb nail, the thumb nail in many cases is a separate file. So the problem can be the camera itself.\015\012 The other issue is the image editing software you are using and ho ... Digital Cameras

My Nikon d70s does not take a picture. It only shows a pixelated color mosaic on the screen (back view finder) as well as when it gets printed. Very swirly-colorful bar image. This just happened. No dropped camera or change in environment. Kept in case. Can any one help? Thank you.

... Nikon D70s Digital Camera

Inoperable When click camera "on", the lens protrudes only slightly, goes no further and I cannot see an image either through viewfinder or screen; the orange indicator light does not illuminate. Sometimes I hear the camera motor working, but nothing happens with the lens.. When I press "off", camera recedes normally. When I move the lever to view, green light illuminates and I'm able to view previous photos normally. I would greatly appreciate response promptly, since there are some beautiful s

The Zoom mechanizim is faulty- this is a shop repair job.The other possible cause is failing or incorrect battery type.Either will not deliver enough power to operate the lens.So check battery condition/type.IF OK Check Canon ... Canon PowerShot S3 IS Digital Camera

Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.

Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera

When I put it into picture taking mode, the screen shows a blurry, streaked brown/purple version of the image. Every minute or so it snaps back into full color and works perfectly, but then it goes back to the messed up screen within a few minutes. What should I do?

Mine shows up green and blurry.\015\012As far as I can make out the sensors gone on mine.\015\012It's an old camera. A good one mind, but old. I up graded ... Fuji FinePix F700 Digital Camera

Pentax A3 slr 35mm automatic wind on, not used for ages, put batteries in without film and pressed button.It moved from the "S" position to the first frame but then jammed.Opened the back and the counter went back to "S" but when you press the button nothing happens even with a film in.Look through the veiwfinder and it is just dark,no images appear, and the number 1000 in green in the top left hand corner. Any ideas as I wnted to put it up for sale. regards pete

... Digital Cameras

When I try to take a picture, the LCD displays a lot of colorfull squiggly lines instead of the scene that I want to capture. When I turn it ON, the Zoom lens extends normally, then the colored lines appear with the following settings on the screen. Auto, 1M 178, ISO 400, ! plus a hand icon, AUTO, 4, F2.8. No matter which mode I choose, the same thing happens. Looking through the EVF shows the same thing. Note; I can view several good pictures that I took before the problem showed up. If I

This would be caused by a defective CCD sensor inside rad this advisory from canon below:\015\012\015\012http://www.dpre ... Fuji FinePix S5000 Digital Camera

My screen shows things in a blurry purple/blue tint. Pictures turn out the same way. Nothing has happened to the camera that I know of. I charged the battery one day while the camera was fine, and when I put it back in I had this problem. Any idea whats up?

... Sony Cybershot DSC-T77 Digital Camera

For the first time I'm getting the message on my lcd display "cannot play back image" with a yellow question mark. Whatever has happened is keeping me from viewing my photos. Any idea how to correct the situation?

This is happening usually when the picture is taken in another camera or is adulterated on the card ..if you know you did not used the card in another device ..than is just a card error ...Remove the card and reinsert it again ...Meanwhile ..sh ... Digital Cameras

The lense that came with this camara twists hard at a certain point then it goes back to normal. I do not know what happened to it.

If you have just purchased this combo, you should contact Nikon support as it may be under warranty.You can contact Nikon support here:http://www.nikonusa.com/Service-And-Support/Product-Support.pageOtherwise, you probably have some s ... Nikon D5000 Digital Camera

My canon a470 powershot could not captured in the day time it appears no image but only white colors...idont know what happened this is not like b4..plsss help

... Canon Digital Cameras

Samsung sdc230 i have a samsung scd230 and when i turn it on ( on cam) i dont see anything but black and all lines in white but i dont see any images sometimes if i let it on for a while it will comes back to normal but a few days later the sames problems happen, my cam is about 3 to 4 years olds but i just took it a few times ,one wedding and a few other times it's still in a new condition , i dont know what to do with that if you can help me please do so

Your CCD is dead. i have met this problem. Your visor and tft screen work if you play a miniDV in your sdc230. In fact, no input image from your CCD. ... Digital Cameras

My video camcorder picture is yellow. It looks like you have put a yellow ilter in front of the lens and the color is so intence that it cannot be filtered back to normal in adobe premiere for example. What has happened? Can a service ajust the RGB balance or is the CCD broken?

My guess is that you were shooting indoors, the light balance is off; Why! can be caused by many varibles; pull out the manual to see if there is a manual ajustment for incondesent light to daylight. Check battery, lens for obstruction, lint can mess ... Digital Cameras

When I transfer photos from my Canon digital camera SX10 IS to the computer monitor through the card reader all goes well EXCEPT that when I remove the card from the reader and re-insert it in the camera, the screen on the camera back shows the wording "NO IMAGE". This never happened to me before. What am I doing wrong please? Many thanks for helping an oldage pensioner still baffled with computer navigation.

Hello!I might have understood you incorrectly, but if I do - the NO IMAGE message tells you that there are currently no photos on the memory card. The way I see it (please correct me if I'm wrong), when connecting the memory card to ... Canon Digital Cameras

My Canon G9 has a problem, where everything functions normally, except the viewing screen is black (the functions and menu show up though), and when you take a picture, the image is black. I can still play back photos before this happened and see them on the camera with no problem, but cannot take new photos. Any thoughts?

Look inside the lens while the camera is on - check the iris to see if it's open. It is similar to the iris in your eye. When the camera is in low light, the iris should open wider. Sometime the iris can get stuck due to moisture. Leave it in a dry e ... Canon PowerShot G9 Digital Camera

I have a minolta Dimage x31. When you try to turn the camera on you can here the drive but nothing happens on screen it goes back to black so you cannot take any pictures. Any ideas pls?

I also have a minolta dimage z3 and this camera is power hungry all the time . does the lenscover come open ? when not put in fresh batteries and try again if this doesn't help i suggest you take it to a repairshop and ask them if they will investiga ... Digital Cameras

My Handycam DCRDVD201E has just started showing images in negative. I have tried everything I can to see if I can change it back to normal but it isn't happening. Is there something wrong or have I just missed the setting? Thanks

Recovery factory set maybe helpful ... Digital Cameras

When I turn the camera on, the lens goes out then back in. I have charged it all night. Any ideas? Think I need a new battery? I have a kodak 3x optical zoom 7.2. Of course I am on vacation while this happens.

Does the camera show battery empty? If yes, this is the problem and it could be solved with a new battery. Anyway, the best thing you could do is go to a Kodak dealer and ask they're help, as it might be a software problem too. ... Kodak EASYSHARE M763 Digital Camera

My Panasonic DMC-TZ3 in any shooting mode produces the following both on the screen and in a captured image: a blurry, snowy, magenta-tinted (visual noise?) presentation. At one point, it produced several normal images, then returned to the problem. The playback mode produces normal images from sored normal images. I have never dropped the camera or exposed it to high heat or cold. I have 3 batteries and none produce any variance in the bad image. I've tied all settings and reset. Up until the

The problem you have mentioned is definitely a case of image sensor malfunction since the distortions are appearing in the pictures too. Getting the imagesensor replaced is the only way to fix this problem. ... Panasonic Lumix DMC-TZ3 Digital Camera

My camera when turned on no images appear in the lcd screen only tinge of brown-black colors or light blue color appear in the screen. Before this thing happened, once it's turned on immediately images appear in the lcd. What most probably happened?

... Sony Cyber-shot DSC-T9 Digital Camera

Color Saturation I just upgraded to the Digital Rebel XT, and I noticed that my images (i usually shoot at ISO 100 w/a polarizer) are a little bland in the color saturation department. I have the camera set to Adobe RGB and am using photoshop to process the images (I usually shoot the high-quality JPGs), but I'm frustrated that the only way to get the color to match what I'm truly seeing in front of me is to pump up the saturation levels in Photoshop. I'd like the camera to capture that in the f

I have the same camera and felt the same way about the colors. You can adjust the saturation slightly in the camera settings by going to the menu then down to paramerters. I find that it doesnt change the saturation too much though. Also try playi ... Canon Digital Rebel XT / EOS 350D Body only Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1886 seconds