Having problems with your Largan Chameleon Mega Digital Camera ?

Installation problem When I am going to install Chameleon Digital camera in my Windows XP SP2 the system automatically reboots and the installation process does not complete and the system asks for installation again which results rebooting again. What should be the probable solution. It works with Windows98 perfectly.



Answers :

Check the drivers here you may need the update
\015\012
\015\012There is one Chameleon Mega link on the page it appears to be the driver (no Vista Driver),

There is a user guide and a setup guide on the far right.

http://www.largan.com.tw/digital/download_en.htm#chameleonXP
\015\012\015\012In order to read these manuals you may need to download and install adobe reader from

http://www.adobe.com
Repair Help & Product Troubleshooting for Largan Chameleon Mega Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installation problem When I am going to install Chameleon Digital camera in my Windows XP SP2 the system automatically reboots and the installation process does not complete and the system asks for installation again which results rebooting again. What should be the probable solution. It works with Windows98 perfectly.


Check the drivers here you may need the update\015\012\015\012There is one Chameleon Mega link on the page it appears to be the driver (no Vista Driver),There is a user guide and a setup guide on the far right. ... Largan Chameleon Mega Digital Camera

I already installed the islim 300x genius web cam driver following the setup on screen step by step installation. It was successfully installed in the system but the camera only lights but windows again asks for the driver when it was already installed prior to attaching the webcam on usb port.


... Genius Digital Cameras

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.


The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the ... Kodak Easyshare M753 Slim Digital Camera

Installation I have just purchased my new G6 and want to install the new version, however I have the Canon Zoombrowser Version 3.1 on my computer. When it asks do I want to install the new version it will uninstall the old version and all it's components. If I say yes, will I lose all my photos it will it automatically transfer all the pictures into the new version??


It is no problem to change the version of program. You will not loss your photos. Your photos are actualy on the diferent folders on your PC hard disk but not in the folder of ZoomBrouser - the program will not touch them. Go ahead. ;)\015\012Best Re ... Canon PowerShot G6 Digital Camera

UI have installed Kodak easyshare Sofware when I had windows vista so then my hard drive crashed and I have had Windows 7 installed. Koda Easyshare software was accepted but now when I intal the cable to download pics onto my laptop, it says the device failed to install so as a result I cannot download photos. Please, what can I do to rectify this problem? Thanks.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EASYSHARE M1063 Digital Camera

Installation OK, I bought the model DC-1512E today and took a few photos and when I got home I connected the USB to my computer and thought installation was not needed since no CD was included within the package.. Yet when I try to find the photos it asks for installation before I can view anything.. is there a way for me to bypass this insistent annoyance?


EVERY DIGITAL CAMERA HAS TO HAVE A CD DRIVER OR IT WILL NOT LOAD PERIOD... CHECK WITH ARGUS AND HAVE THEM SEND U A DRIVER CD FOR UR CAMERA ... Argus DC1512 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

Nikon D70s will not format CF card. Have tried different cards with same result. Connected the camera to PC with card installed but PC says no card installed. Is this a firmware problem?


Go into your menu and change the USB connection from PTP to Mass Storage, Then connect to PC and try formatting. be sure to use FAT16 and not NTFS. ... Nikon Digital Cameras

Hi.I use a mercury cyberpix S555V digicam(5 megapixel).I have windows 7 on my pc.I want 2 use it as a webcam on my pc & it supports the feature too.But even after installing its driver from the CD provided in the box,it does not detect the driver.Error message is "THE DRIVERS FOR THIS DEVICE ARE NOT INSTALLED ERROR CODE 28.My USB cable is perfectly fine as it works well while 'Mass Storage".Pl help me connect it as a webcam.It works as a webcam on XP but not on windows 7.Pl help.


Hello, please get the driver here :\012 Support">www.mercury-pc.com > Support \012\012www.opendrive ... Mercury Electronics CyberPix S-555V Digital Camera

Plugging in the USB connection between Panasonic Lumix FZ20 and Mac G4 results in immediate computer shutdown. Camera is on and in playback. Battery fully charged. OSX 10.4.11 is installed. Manual insists driver should show up on desktop using OSX after cord plugged in, with no additional software installation. None of the software on CD provided with the camera is OSX. No updated drivers (supposedly not needed) found.


The usb socket of the camera,must be chaqued,if needs replace it....conection failure. ... Panasonic Lumix DMC-FZ20 Digital Camera

I am trying to install my dsc-2100 on my new laptop.i put disc in and it installs drivers. Then it asks for serial #.my serial # is faded and the first number and or letter seems to be missing. Any ideas? Are these beginning characters typicle?


On your install cd there is a file called Sno.txt. Open it, has your serial number ... Apex Digital Digitrex DSC-2100 Digital Camera

Nikon transfer software was successfully installed. however windows vista is asking to install device driver software when i connected nicon s4000 to a computer. what's the problem?


Having gone over five months without a response, I assume my suggestion to use a card reader eliminated the need for a driver. ... Nikon Coolpix S4000 Digital Camera

Will not install. connect to PC, and XP asks for install hardware. XP can not find location of software drivers. Only CD that came with camera is Disney Pix


Well, please get it downloaded here :\012www.download3k.com/Drivers/.../Polaroid/Download-Polroid-DMC-Driver ... Disney Pix Micro Digital Camera

Sir I installed the apitek mega manager software from your site. Even after installation it is showing that camera is not connected to computer. I have checked all the connections but still no results pls help me as there r imp photos. I have lost the installatin c d . Anup


... Aiptek Mini PenCam Digital Camera

New sd card will not allow me to select format. Wanting to install new SD card. Removed current 1GB card and installed new 4GB. Then went to format and it doesn't seem to reconize the new card. It states "Memoray card error" but I tried two new cards with same result. It sees the old card just fine. suggestions on how to format the new card or is it the camera.


This camera was manufactured before the SDHC protocol was developed for SD cards. A 'standard' SD card protocol is 2GB maximum, and that is what the camera is compatible with. I'm pretty sure the cards you are trying to use say SDHC on them, right? ... Canon PowerShot A520 Digital Camera

The CD-ROM with drivers for camera 11-0013 will not install. Wizard: Only Windows98 operating system needs to install Bushnell_Usb_Driver. I have WindowsXP.


... Bushnell 11-0013 Digital Camera

HELP! I can't download and install the software for my camera! I need to ask someone why it won't install! It says that the disk is insufficent on my computer. What does that mean?


It means you will have to delete files from your computer like od movies ,songs and programs you are not using.let me know if you need further help\015\012Adrian ... Digital Cameras

I have bought the Razr V3 camera phone and when I come to download with the USB connection to the phone via a disc I get a window asking me: mobile will not function correctly without a mobile device installed. Do you want to install one now. I clicked on yes, and it will not download.


... Digital Cameras

I have recently bought a Samsung Camcorder Model #MX20 with the Cyberlink Media Show 4 software. When installed on my laptop, everything works well, but when installed on my desktop, I cannot get the video picture when playing it back, only the sound. - After asking around, I was informed that the problem might be something to do with the required "codec" and to download the VLC Media Player which has all the required codec info. After downloading VLC I was able to view the video pictures with t


\011After the conversation today, I was able, with your suggestions, to view my video pictures, but the core of the problem still remains. I still need to use the Cyberlink software (or equivalent) as it has all the working tools to edit ... Samsung Digital Cameras

Lost software I had to recently reboot my PC and lost the info from the camera. I can't find the installation CD to reinstall it. Is there a web site I can go to to install the software.


Fuji download site\015\012http://www.fujifilm.com/products/digital/download/index.html ... Fuji FinePix 2650 Digital Camera

I have a cannon zoom browser installed, have XP and Off 2003. I get zb thumbnails in My Pictures and can't open them. I dbl click and get a screen asking to save or open, try open and nothing happens other than the same screen comes up again, asking to open or save.


I would advise you to get a card reader and use it to download your pics to a folder you create on your desktop. From there, you can send the pics to any program you want or just open them from there. ... Digital Cameras

Installation problem i use a largan easy 300 for work and i need to upload some pictures to my company. my computer runs windows xp. the camera instructions say to just plug it in and windows will find the drivers. windows is asking for an installation disc which i do not have. please help me find one to download.


Here are the drivers to your camera:http://www.largan.com.tw/digital/download_en.htm ... Largan Easy 300 Digital Camera

The utility camera windows instaled under win 7 no detect the camera when i connect it. I installed the same software under win xp and it's work perfectly. Any solution for this?


Use a card reader instead of the camera. ... Canon PowerShot S2 IS Digital Camera

Problem lies between my ears :). I installed PBM software on notebook but last part od installation about connecting camera to notebook goes into a loop insisting I plug the camera in. When done and click on continue it re-asks to have the camera plugged in. Control panel of notebook sees teh memory stick but you cannot gain access to it. Q: How do I download teh ;picture sto be viewed and copied?


Hi\012you might get a external memory card reader and plug memory stick to reader. then you can see a new drive in my computer. rest of work you can handle.\012Thanks and best regard! ... Sony Cyber-Shot DSC-W530 Digital Camera

I am trying to install my dsc-2100 on my new laptop.I put disc in and it installs drivers. Then it asks for serial #.My serial # is faded and the first number and or letter seems to be missing. Any ideas? Are these beginning characters typicle?


Please get it downloaded here :\012www.giveawayoftheday.com/apex+camera+driver/\012\012 ... Apex Digital Digitrex DSC-2100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0664 seconds