Having problems with your Largan Chameleon XP Digital Camera ?

I need the software and driver for my chameleon camera. Your suggestions so far are that I download a program to up date drivers. But since my camera isn't loaded in my computer, nothing recognizes an update


Answers :

The driver recognizes the camera if the driver is downloaded in to your computer IF the driver is recognized by the Operating System you have in it. You will need to see if its a compadible driver
Plug in your camera to your computer using the usb cable, and it should be detected as "new usb device". Next, go and click Start >> Programs >> Accessories >> Scanners and Cameras. Upon clicking, it should detect the camera and will open you a wizard. From there, you can download all your pictures from the camera. Please take note that your camera should be in "play" mode and not camera mode.

Please let me know how this goes.
Repair Help & Product Troubleshooting for Largan Chameleon XP Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need the software and driver for my chameleon camera. Your suggestions so far are that I download a program to up date drivers. But since my camera isn't loaded in my computer, nothing recognizes an update


The driver recognizes the camera if the driver is downloaded in to your computer IF the driver is recognized by the Operating System you have in it. You will need to see if its a compadible driver ... Largan Chameleon XP Digital Camera

My photos won't transfer to my computer. The the last time I loaded photos onto my computer which was last week, it worked fine. however today the same computer says it does not recognize the USB device, so the camera wizard will not come up. I work in a office so in tried several different computers, none worked. some say usb not recognized, some say there is a power surge at the hub, whatever that means. So bottom line is I'm not able to get my photos onto a computer. What changed since last w


Change the USB port. If you are connecting it to front USB of your computer, try connecting it to USB port at back of computer.. \015\012\015\012The cable might be fauty. ... Kodak EasyShare C330 Digital Camera

Coolpix3200 my camera has always worked fine, but recently when i try to upload pics to my computer, my computer does not even recognize my camera is there. i have a macbook and nothing has changed since the last time i have uploaded pictures. i have tried restarting computer/taking batteries out of camera, everything.


Check by plugging it into the other USB Port, sometimes a port refresh helps, Some times if you start up your mac with the camera plugged in it only thinks it has a drive there...swap to the other drive and wait to see if it is recognised, you can al ... Nikon Coolpix 3200 Digital Camera

Loaded the software and plugged in the camera to computer. Computer does not recognize camera. Nothing happemds. Tried 2 different cords. ??


Use a card reader instead of your camera. ... Kodak EasyShare C180 Digital Camera

I'm unable to load pictures onto my computer even if I take the memory card out and put it into a card-reader. The camera recognizes that there is the camera hooked up, since it charges it, but an icon does /not/ show up on the computer. I have a M340 EasyShare, and need some help.


Might not want to hear this, but you need the Kodak Easyshare software to download pictures from the camera to your pc. I have found no other way to do it without their software. ... Kodak EASYSHARE M340 Digital Camera

Camera malfunctioning my pc doesn't recognize my camera anymore. everytime i plug it to the usb port, nothing would happen or it'll say the folder's empty. i don't think the computer is the problem since i've tried plugging it to two other computers. what should i do?


Trouble shoot:\015\012\015\012Take a picture and see if it goes to internal memory or if you have a SD card it goes there. Check the camera not on the computer and make sure it took the picture.Then plug it into the computer while off.Pre ... Sony Cyber-shot DSC-S700 Digital Camera

I plug my camera into the usb to load pictures to my computer but nothing at all loads.... isnt something supposed to pop up? i have the polaroid i633


Make sure you have installed the software/drivers for the polaroid i633. Many cameras require you have software installed on the computer hard drive in order to detect that camera.If you do not have the software/cd, then you should be abl ... Digital Cameras

Finepix A800 The LCD Monitor has a frozen skewed kalidoscope type image on it. It is impossible for me to remove it or to get anything brought up such as the menu, or to view the couple of hundreds of pictures that I have taken on it. It is possible, still, to load the pictures from the camera to the computer, but that is all that I can do. I cannot manually delete any of the pictures from the camera, since nothing shows up on the monitor except for that frozen weird design. It will still take p


I have had the same problem with my F-700After calling Fujifilm Custom support here in Spain, I've noticed that camera series had a common failure at CCD SENSOR, NOT THE SCREEN.IF THE PROBLEM IS CCD (IMAGE SENSOR) FUJIFILM ... Fuji FinePix F700 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

I have a vivitar 8600S which downloaded to my computer using Microsoft Office XP. Since up-grading my computer and using Microsoft Vista, I can no longer download - presumably because the CDs issued with the camera are out of date. How can I get an updated program to enable download to Vista?


... Vivitar ViviCam 8600s Digital Camera

I have a konica Monota model DG-5D camera and the USB port is not recognized when I connect it to my PC. I am attempting to down load my pictures to computer and the massage reported from the PC is devices is not recognized. PC drivers are up to date. I need your help with trouble shooting problem.


I could not find a Konica Minolta Model DG-5D camera listed on the support web pages.\015\012\015\012I did find a "DYNAX5D/Maxxum5D" that had ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

WILL THE REBEL 300D DOWN LOAD VIA IT'S USB CABLE TO MY COMPUTER WITH VISTA AS MY OS? I CAN ONLY USE AN EXTERNAL USB CARD READER TO GET MY PICTURES. CANNON'S SITE DOES NOT OFFER DRIVERS FOR VISTA 32 OR 64 BIT. SOME SITES CLAIM TO UPDATE ALL DRIVERS, BUT FOR A FEE. MY COMPUTER RECOGNIZES THE CAMERA AS NEW HARDWARE BUT EVEN WITH THE DISK WITH TWAIN AND WIA DRIVERS 5.2.1 IT TELLS ME THERE ARE NO DRIVERS ON THE DISK. THANKS, MICHAEL


Please get it at these links :\012www.nodevice.com/driver/.../Canon/Digital_Cameras.html\012\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Panasonic dmc 28 isnt recognized by windows picture and fax viewer... wanted to load pics into file... panasonic photo fun comes on then goes into slide show mode. when I hooked up the usb and selected pc the camera used to access and then be prompted to load pics but no more... no prompt ... nothing


Use a card reader and solve all your problems. ... Panasonic Lumix DMC-FZ8 Digital Camera

My zoombrowser program will not recognize when my camera is attached to the computer with the supplied cord. The computer recognizes that a camera is found, but will not let the program recognize it. Lately, I've also been getting the note: invalid class string. Then I have to uninstall the complete canon program and install it all over again. Then the program works, but still says no camera found. And, the camera is set in the mode to load to the program.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A95 Digital Camera

My camera samsung wb500 cannot be recognized by a computer. When plug it in to the computer via usb cord it is recognized by the pc. The light on the camera flickers but nothing happens. Thus I am not able to transfer pictures from the camera to the pc. I've tried different usb ports on two different computers and it was still the same, so the problem shouldn't be on the side of computer. Any suggestion what can be the problem?


I have the same problem with my WB500. From the start I haven't been able to charge it via the computer or down load photos. I solved the problem by buying a card reader and a separate battery charger. I tried to get the problem resolved by Samsung, ... Samsung HZ10W / WB500 Digital Camera

My camera samsung wb500 cannot be recognized by a computer. When plug it in to the computer via usb cord it is recognized by the pc. The light on the camera flickers but nothing happens. Thus I am not able to transfer pictures from the camera to the pc. I've tried different usb ports on two different computers and it was still the same, so the problem shouldn't be on the side of computer. Any suggestion what can be the problem?


Cross your fingers and hope it is just the cable. The flashing light shows it made a momentary connection. The connectors get loose from use and abuse. They are not expensive to replace. If you can find a store or camera shop or have a friend with th ... Digital Cameras

Nikon s6000 driver doesn't want to install. I've tried installing and unistalling the software suite multiple times. I've tried dl'ing the driver directly from the CD via updating the driver throiugh device manager. Nothing I've done so far can get the computer to recognize the camera. Well that's not quite right. When I plug it into the USB port, I get the typical "boing" noise Windows makes when you plug in a plug and play piece of hardware. The USB drive port remains in a harddrive type of ic


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Nikon COOLPIX S6000 Digital Camera

I successfully loaded the software that came witht he A75 onto my new Dell PC (OS = Windows Vista). Afterwards I connected the camera to the PC using the provided cable and the computer recognized it. I then followed the directions for using the software for the first time, but nothing happens. Any thoughts about what could be wrong?


If your camera is not relatively new and you're running Vista, Vista may have problems seeing it. Unfortunately, this can't be corrected as Canon did not update the drivers for your camera for Vista. But there exists a good, if not better alternati ... Canon PowerShot A75 Digital Camera

The window won't come up on my computer to load my pics . I just updated th finepix version. I plug in the usb and turn on the camera and nothing happens.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Fuji Finepix F50FD Digital Camera

FE 230 olympus camera is not recognized by wxp computer using usb cable between camera and computer. It was recognized before updated software. Now using Olympus master 2.0. Think updated driver would solve problem?


Please get it here :\012\012www.olympusamerica.com > Home > Support\012 ... Olympus FE-230 Digital Camera

Fe 230 olympus camera is not recognized by wxp computer using usb cable between camera and computer. It was recognized before updated software. Now using Olympus master 2.0. Think updated driver would solve problem?


Please get the driver here :\012\012www.olympusamerica.com > Home > Support\012 ... Olympus FE-230 Digital Camera

I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help


I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera

The camera will charge and take pictures but I cannot load them on my computer. I have a Mac OS X computer. I used to be able to load them to my Kodak Gallery. Now my computer does not recognize my camera. I have reloaded the Kodak Easy Share software, but this has not solved the problem. I have also tried unplugging and replugging the usb cord.


You might want to consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (e ... Kodak EasyShare C340 Digital Camera

My dell inspiron (with windows vista) is not recognizing a new Canon G10, so i am unable to download photos. i have tried all the suggestions in the Canon G10 manuals for troubleshooting and have followed all of the instructions for connecting camera to computer, but nothing works. the Canon website says that there are no drivers required for this camera with windows Vista, and provides no drivers that can be downloaded. My computer does not recognize that the camera is attached when I look in D


You can download the vista drivers here on link below. Just click on the drivers and downloads in link. Them click on your operating system and pick vista or vista x64. Then go down to the next box software 2 down.\015\012\015\012 ... Canon PowerShot G10 Digital Camera

I have a samsung ES25 4x .12.2 Mega Pixels. I have been able to down load all photos onto my PC until now. When I plug in my led from camera to computer I get nothing. I have also tried taking card ou


... Samsung ES25 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6550 seconds