Having problems with your Leica D-lux 3 Digital Camera ?

When i turn it on the lens goes in and out a couple off times then say please turn off and on again and it doesnt focus properly


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Leica D-lux 3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i turn it on the lens goes in and out a couple off times then say please turn off and on again and it doesnt focus properly


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Leica D-lux 3 Digital Camera

When i turn it on the lens goes in and out a couple off times then say please turn off and on again and it doesnt focus properly


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Leica D-lux 3 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

I have small SONY DIGITAL CAMERA DSCW90S,when you turn it on the lens barral slide open, then closes then slides open then closes, the lens shutter keep nicely opening and closing but the barral is not stable keeps oppening and clossing for couple of times and then it says TURN THE POWER OFF AND ON AGAIN, but when i do so, it doesnt help. please help me, thank you :) Alena Lorinczova, DUBAI, UAE


... Sony Digital Cameras

Heya i have a cannon powershot a480 and i got it near christmas time and when i turn it on it says "Lens error, restart camera" and i keep trying but it doesnt work, I took it to the beach the othe day and i think it may have a tiny bit of sand inside it but it work for a few minuits after it got sand in then stopped working Please could you help me? Thankyou <3


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “le ... Digital Cameras

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

Auto focus no longer works. Every time I turn the camera on, I get the ''Please turn camera off and then on again message''. When I do that, it can focus in the default lens position, but as soon as I move the lens, it is not able to focus. Battery is fully charged. All settings were reset to default. Formatted SD, and upgraded to V1.2 software. Still no help.


Fast of all happy new year \015\012 your problem is only about your cam machanisam which is not adjast at right position you have to open it and rearange rightly.\015\012 for this you have to right tools for it or y ... Panasonic Digital Cameras

Okay, first off i have a sony-cybershot dsc-W80 and one day i brang it to the park and dropped in the sand accidentaly. Now whenever i turn it on, it says cyber-shot on the screen and the lens goes out and in about 4 times, then on the screen it say please turn power off and on again, and it keeps doing the same thing over and over again. please help!


These are always lens error messages-the lens is stuck or off track and camera will need to be serviced ... Digital Cameras

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!


The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

Does anyone have instructions for getting at the lens mechanism? I totally understand the risks of doing this myself, but the cost of getting a shop to do this is nearly as much as a new camera! I am sure the problem is caused by sand. The lens at first just went in and out a few time, before the camera turned off. I vacuumed it, then slapped it against the side of my hand whilst turning it on - now it turns on properly with the lens out, but it wont focus - so you can only take blurry photo


I guess , lens got damaged; if that is the case you need to change the lens and its very complex process.You need it to get repaired from authorized shop. ... Olympus FE-280 Digital Camera

The camera says please turn camera off and then on again every time i turn it on I dropped my camera and now when I turn it on the lens goes back and forth and the display reads "Please turn camera off and then on again"


Hi,\015\012I too have the sam problem but was able to solve it. I called the 1-800-number and was told that this is a very common issue or this camera. They told me to tap the lens when it was extended on a cloth or ... Panasonic Lumix DMC-TZ3 Digital Camera

Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.


Try these procedures. ... Canon PowerShot SX100 IS Digital Camera

When I turn on the camera the zoom lense goes in and out and it says" PLEASE TURN CAMERA OFF AND THEN ON AGAIN" When I turn it off the lens stays out and when I run it on it gives the same error message and it will not focus or let me move the lens in or out.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Panasonic DMC-TZ5 Digital Camera

When i turned it off the lens never went in now every time i turn on the camera it says lens error and turns off. Please Help Me!!


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Nikon Coolpix L11 Digital Camera

Camera doesnt focus when turned on. i have to turn it off then turn on again, sometimes several times, before i get the proper focus.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... FUJIFILM FinePix JX250 Digital Camera

I have a sony cybershot camera, i took it into the mountains the other day, and it has not been working properly since. every time i turn it on the lens comes in and olut multiple times and says, "turn the power off and on again." i can still look at pictures on it, but am unable to bring up a menu or take any pictures. i have recharged the battery and let it warm up, but nothing seems to change anything.


DSC-W120===============Hi,You need to replace lens assembly in camera to get it back in business.Lens mechanism is not sending initialize signal to system control due to some reason and system control chip tries to open ... Digital Cameras

I own a Sony Cybershot DSC W120 and once a guy pressed the lens inside without turning off.And the next time when I opened..it says"Turn off and on again'...I think I had done restarting a 50 times and still it is not working...PLEASE HELP Thanks in advance.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Sony Cybershot S650 Digital Camera

Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!


THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras

I have a Sony Cybershot DSC W100. I accidentally dropped it and now it says 'Access' and the lens opens and closes three times then beeps and says, 'Turn the power off and on again'. I have done this and it still doesn't work. I tried to initialize the settings - that didn't work either. I even played around with the lens some, and that didn't fix it. If you have any other suggestions please help! I would hate to have to pay $130 bucks to have it fixed.


They are trying to say that you may need to open the camera and check and clean the lens, because there's a big possibility that the lens is misaligned or worse its bad already and needs a replacement...Good luck......... ... Sony Digital Cameras

Camera frozen I have recharged the battery and have changed charged batteries several times, howeverer when I turn the camjer on nothing happens(the lens is and remains extended ) but a red light blinks for a short while then goes off. The first few times that I tried to turn the camera on there was an error messafe on the screen saying error and a number but I don't remember what it was. Please can yoy help?


Try removing the memory card first then turn it on ...see what happensthe problem maybe with your card and not with the camera ... Kodak EasyShare C360 Digital Camera

Hello Everyone! I'm in Tokyo and when taking pictures this afternoon, and when I tried to turn off the camera the Lens didn't retract (I'm sorry if this is not the appropriate term it is not written in English, and English is not my mother tongue). And when I try to turn it back on, It says "Lens Error" in red. Can anyone please help me with this?? Such a bad time for this to happen....


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Nikon COOLPIX S710 Digital Camera

When I turn on my Lumix DMC-FS3 Camera the lens tries to go out but it does it half way, then it goes in and the action is repeated about three times. Then there is a message on the display that says "Please turn off your camera and then turn it on again". I do that and the process repeats. Thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS3 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

I have a panasonic lumix DMC-TZ3 camera and it's not working. When I turn it on, the lenses comes out/goes in like 3 times but it won't focus and stay open. I can't take a picture. A message says to turn it off and turn it back on again, but it doesn't work. I can view my album in the the camera....please help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-TZ3 Digital Camera

Canon Powershot My dog jumped up at me while I was trying to take a picture, and needless to say she knocked the thing right out of my hands. The lens now won't retract properly and the two outer most pieces of the lens just kind of rotate freely. I can get the camera to turn on - but it wont focus because of the lens issues. What do I do??


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty: ... Canon PowerShot SD850 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3810 seconds