Having problems with your Microtek Take-it MV300 Digital Camera ?
Flash fails I have three Microtek Take-it MV300. I cannot get flash to work on any of them
Make sure the flash is turned on. Look for a lightening bolt symbol.
Repair Help & Product Troubleshooting for Microtek Take-it MV300 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Flash fails I have three Microtek Take-it MV300. I cannot get flash to work on any of them
Make sure the flash is turned on. Look for a lightening bolt symbol. ... Microtek Take-it MV300 Digital Camera
I have purchased a Canon EX580 II Speedlight for my Canon 60D. I cannot seem to get it to work when taking photographs. I have tested it on the pilot light and it works OK. As soon as I try it taking a photo it doesn't flash no matter how light or dark it is. Is there something wrong with the flash do you think?
In auto mode your camera makes just about all the decisions for you. Sure, you frame the subject and push the shutter release button, but you never have to think about things like exposure or whether you need to use a flash; the camera handles all of ... Digital Cameras
Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??
Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera
I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u
Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras
Flash Problem Rebel XT flash icon shows next to "busy" in the view finder when I press the shutter button. If I attempt to take the photo the flash does not work. If I continue to hold the shutter half way down, then release it I get Err 99. I am using genuine Canon lens' and have tried all three. I also connected my 420EX external flash and it also does not flash. Any suggestions are deeply appreciated. Thanks
Hey tombston,\015\012 An error code of 99 is Canons general error code for this camera, and they suggest cleaning the lens contacts and/or removing the battery and then reinserting it. If this doesn’t work I wou ... Canon Rebel XT / EOS 350D Digital Camera
Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t
Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera
My digital camera will turn on but the screen shows three big black spots. I cannot see anything. The flash will work as if I am taking a picture. I cannot see the screen to see the picture that was taken.
... Digital Cameras
Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.
Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera
I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again
I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera
Good Morning; My favorite grandson was playing with my Fugi FinePix S700 and now I cannot get the thing to work. Batteries are fine and fully charged. I cannot get the camera to view the picture I wish to take. All I can get on my wiew finder is the screen with the crosshairs. The camera is set on Auto mode. I wish to know how to get the camera to take pictures again, has there been a setting moved or something ?? Thx in advance for your help, FYI, I cannot find my owners manual and ma
Hello, thank you for choosing Fixya for your Tech support. First , here is the link to your manual.. You can print it out if you like. http://www.siue.edu/lovejoylibrary/avs/pdf/FUJIFILM_DIGITAL_CAMERA.pdf Now fo ... Fuji FinePix S700 Digital Camera
When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but
Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera
My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks
Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera
Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,
The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera
D90 flash I just bought a new Nikon D90 and I was on a shoot and the built in flash popped up (in bright sun in manual mode) and I cannot get it to stay down. the camera will work but only to 200 shutter speed. if I hold the flash down then it will work at all shutter speeds. Any Ideas on how to get the flash to go down?
I have just fixed this problem on my D90. Go to http://dieselpic.wordpress.com/2010/07/14/d90-flash-wont-stay-down-how-to-fix/ to see how I did it. ... Nikon D90 Digital Camera with 18-105mm lens
Cannot get wireless flash mode to work on my 7D
It is not operator error. I had a similar experience and spent days pulling my hair out trying to figure out the problem.Unfortunately, the 5400HS is NOT compatible with the 7D. Only to 3600HS(D) and 5600HS(D) are.The problem ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
I bought the camera in the UK but I have since moved to Portugal and have only now had a chance to get the new camera out. This, I know, is my fault. But, nevertheless, I can't get it to work - the LCD monitor remains black when shooting whatever I do. It will take pictures via the optical viewfinder okay but I cannot get the screen to show. It works to display the settings etc but not for taking pictures so that when I press the display button it alternates between the photo settings (which
Canon models oddly do not support images on the LCD in every picture mode. Since the LCD works for settings, my guess is its in the wrong mode for the live view and its is not an issue with the camera's LCD.\015\012\015\012Here is a link to the ... Canon EOS 500D / Digital Rebel T1i Digital Camera
I am having problems with the flash working on my camera. It does not seem to matter if it is in automatic or manual modes. When I take a picture in either mode, when a flash is needed, the flash icon just blinks on the display. The camera will not take any photo when this is happening. The only way I can get my camera to take a photo is manually set the flash to off. Why is this happening?
Please reset camera through Reset option in Menu. This will set camera on default settings and any glitch in settings will be removed.Thanks. ... Canon PowerShot SD870 IS Digital Camera
I have a sony cybershot DSC-T70 when I try to use the flash it doesn't work. When I touch the screen 4 options are supposed to come up and nothing appears except for the one that says no flash. I was thinking maybe it was in auto mode but how do you take that off because I was recently in vegas and I couldn't get the darn thing to work and in most of the pictures you can barely see the people I was taking a picture of
The flash icon will also be disabled if the camera is in burst or continous shooting mode-if possible restore camera to factory defaults and start from there-check in home menu under shooting and see what the settings are ... Digital Cameras
First of all, I cannot get the camera to turn on using power button only play. (it worked two times so I could take 5 pictures, now it wont work) Secondly, the 5 pictures I did take cannot be deleted using the delete button! Pleeease help. I purchased the camera in the U.S and Im already back home and wont be [email protected]
... Polaroid i1036 Digital Camera
E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you! I have the same problem the flash not work will
I started poking all the settings in my Sony DSC-100,and the E:91:01error was on and the flash symbol started to flash.I called Sony no help.I went to the menu then setup.I went to camera one notch ... Sony Cyber-shot DSC-W35 Digital Camera
Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.
There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens
How do I get flash to work. It is turned on but when I take a picture the red flash lamp flashes and this continues for ages and the flash doesnt work
Most issues get solved by resetting to factory settings. Remove your memory card and reset your camera by doing this.... You can reset all settings by tapping menu>setup menu>reset all. \015\012Source(s): P.139 \015\01 ... Nikon COOLPIX S230 Digital Camera
I just received a Cannon Rebel for xmas and it was taking pictures just fine then it wouldn't autofocus and take a clear picture. I do not know if I accidentally hit a button when holding the camera but I cannot get it to take a clear pic. It also flashes a busy signal across the top of the viewing screen when it is flashing. I tried to find the fix in the guide, but nothing helped. Thanks!
Take it back and get an exchange- it's too early in the game to be getting error messages. It shouldn't be flashing busy, unless it's having trouble writing to a faulty card, or some other obscure defect. If it's too inconvenient to have it exch ... Digital Cameras
How do I get the flash to work. I have hit what looks like the flash button directly above the Ok button with no success yet in getting a flash to occur when taking a picture. Thanks for your help.
Check to see if your camera is on the macro function. The button is on the left side of the camera (as you are looking at the screen) and it is a slide button. If the camera is on macro, there will be a flower displayed on the screen. This is for clo ... Vivitar ViviCam 5022 Digital Camera
Dark photo I take a picture with the flash on and it is very dark. I haven't used the camera for about a month and a half. when I used it last, it was working fine. now it takes photos normally (with the flash), but the pictures are barely visible. How do I get it back to taking the normal, brightly lit pictures?
... Sony Cyber-Shot DSC-T11 Digital Camera