Having problems with your Moultrie GameSpy 4.0 Digital Camera Deluxe ?
I have a moultrie d-40 camera. i turn it on to set up and works fine. turn it to auto and it does nothing. cannot get it to turn on in auto.
Run thru setup and see if "auto" is off;if so, turn on...might try seting to factory default; turn off;back on and reprogram your personal settings
Repair Help & Product Troubleshooting for Moultrie GameSpy 4.0 Digital Camera Deluxe
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a moultrie d-40 camera. i turn it on to set up and works fine. turn it to auto and it does nothing. cannot get it to turn on in auto.
Run thru setup and see if "auto" is off;if so, turn on...might try seting to factory default; turn off;back on and reprogram your personal settings ... Moultrie GameSpy 4.0 Digital Camera Deluxe
Good Morning; My favorite grandson was playing with my Fugi FinePix S700 and now I cannot get the thing to work. Batteries are fine and fully charged. I cannot get the camera to view the picture I wish to take. All I can get on my wiew finder is the screen with the crosshairs. The camera is set on Auto mode. I wish to know how to get the camera to take pictures again, has there been a setting moved or something ?? Thx in advance for your help, FYI, I cannot find my owners manual and ma
Hello, thank you for choosing Fixya for your Tech support. First , here is the link to your manual.. You can print it out if you like. http://www.siue.edu/lovejoylibrary/avs/pdf/FUJIFILM_DIGITAL_CAMERA.pdf Now fo ... Fuji FinePix S700 Digital Camera
I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again
I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera
I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.
... Panasonic Lumix DMC-FZ28 Digital Camera
I can't get my camera to flash or work in the "Auto" mode. I've cleared all of the images, reset the settings and use custom settings. I place the camera on "Auto" and turn it on. It goes into the delay mode for 59 seconds and then goes to sleep. It won't take a picture or flash.
... Moultrie GameSpy 4.0 Digital Camera Deluxe
Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??
Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera
My new C182 camera downloaded our first set of photos okay, now I cannot get it to download our second set of photos ( taken a week later). I plug in the port to computer and camera, then turn on camera, nothing happens. Replaced the batteries with new ones.
If, after the first time you downloaded, you didn't use the "safely remove hardware"' function before disconnecting the camera, you may have corrupted the connection. You can always use a card reader for downloading. They work better anyway. ... Kodak Digital Cameras
When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!
Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras
My son hit some buttons on my xt and I am on vacation now. In auto mode it will let you take one pic and that is all. You have to turn the camera off and then on to take another pic. In addition, I cannot bring the menu up at all. Nothing is previewing and nothing is working. I have removed the battery and taken it out for hours, but nothing is working. PLEASE Help!!! I am not sure what he pushed.
First, try removing and replacing the camera battery. Sometimes this will reset the settings. If that doesn't work, then you need to reset your camera by removing (and then reinserting) the small internal battery. They call this the "date/time bat ... Canon Rebel XT / EOS 350D Digital Camera
Pentax, 12megapixels (7.9mm, 23.7mm). camera turns on and will take a picture, but i cannot then preview the picture and the orange light next to the LED viewing screen will continue to blink. At this point, no other buttons work (for example, i can't pull up the menu or zoom the lens), its just frozen. holding down the "on" button will turn the camera off, but nothing gets solved.
... Aqua Pentax Optio S12 Digital Camera
Auto focus no longer works. Every time I turn the camera on, I get the ''Please turn camera off and then on again message''. When I do that, it can focus in the default lens position, but as soon as I move the lens, it is not able to focus. Battery is fully charged. All settings were reset to default. Formatted SD, and upgraded to V1.2 software. Still no help.
Fast of all happy new year \015\012 your problem is only about your cam machanisam which is not adjast at right position you have to open it and rearange rightly.\015\012 for this you have to right tools for it or y ... Panasonic Digital Cameras
When I turn on the camera, it will AF once, then nothing. None of the menus will work, none of the functions work, cannot review pics. If I switch to manual and back to auto, it will AF once. I can take a picture in manual. As soon as I take a picture, I can use the menu or review pictures, but only once. Battery shows to be charged. I have taken it to 2 camera shops and they have no idea.
The problem is in the systems control board, "controls vital areas of the camera" from your description the operation is intermittent when switching from manual to auto, it indicates an hairline crack in the systems board, a tough problem to nail dow ... Sony Alpha DSLR-A100 Digital Camera
E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you! I have the same problem the flash not work will
I started poking all the settings in my Sony DSC-100,and the E:91:01error was on and the flash symbol started to flash.I called Sony no help.I went to the menu then setup.I went to camera one notch ... Sony Cyber-shot DSC-W35 Digital Camera
Cannot get ml-l3 remote control to work on nikon D90. Followed instructions & doesn't work. Tested with 2 different batteries with no luck. Camera is set on auto focus. Thank you
The two batteries are the ones in the remote? Make sure they are installed correctly. The camera will need to have a decently charged battery as well. Put the camera in P mode, pop up the flash and allow to charge. Make sure you pre-focus the cam ... Nikon D90 Digital Camera with 18-105mm lens
I cannot get the camera to turn on at all. I put new batteries in and still nothing will happen. Also i connected it to my computer and usually i can get it to link with the camera but nothing is happening now since i can't get it to turn on. No sounds nothing at all. Do you know what the problem might be?
This camera needs lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). Please also try to Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a sof ... Kodak Easyshare C813 Digital Camera
When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!
The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera
I bought the camera in the UK but I have since moved to Portugal and have only now had a chance to get the new camera out. This, I know, is my fault. But, nevertheless, I can't get it to work - the LCD monitor remains black when shooting whatever I do. It will take pictures via the optical viewfinder okay but I cannot get the screen to show. It works to display the settings etc but not for taking pictures so that when I press the display button it alternates between the photo settings (which
Canon models oddly do not support images on the LCD in every picture mode. Since the LCD works for settings, my guess is its in the wrong mode for the live view and its is not an issue with the camera's LCD.\015\012\015\012Here is a link to the ... Canon EOS 500D / Digital Rebel T1i Digital Camera
Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t
I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens
On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.
I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera
Hello there, i have a tm700 from panasonic and it seems like the camcorder has some focus or depth of field issues, it always been working good until last week when i turned it on everything is out of focus, i tried geting focus back with auto focusand tried it with focus ring but it just seems impossible. only things that are focus are the things about an inch from the lense and i can get it focused if i zoom in a little... its odd because nothing really hapenned to the camera that could have
Inside the lens assembly, the focusing ring is controlled by electromagnets with feedback from the microprocessor and CCD sensor. Many things can effect the focusing circuit, but the most likely things would be any dirt, dust, or lint obstructing t ... Digital Cameras
Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]
Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera
E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you!
Easily just reset the camera with a pencil. ... Sony Cyber-shot DSC-T10 Digital Camera
When I attempt to use the camera in Auto Focus mode many times I depress the button and nothing happens. The camera is on and I depress the button half way no beeps to focus and when depressed fully nothing happens. I then turn the camera off and twist the camera mode dial and and turn the camera back on and it works again not always but many times.
Are you using the 50mm lens with aperture ring, if so move to th largest F no and try again. ... Nikon D90 Digital Camera with 18-105mm lens
When turning on the camera, the card reader light flashes sometimes for a full minute before you can take a picture, I am using a Olympus xD 2GB memory card which works fine after the card reader light quits flashing. Is there some setting that I need to set to get the camera to quit reading the whole card every time I turn the camera on. I formatted the card on the camera.
Are you saying that even with an empty card, it still takes that long? How are your batteries? Fresh or old? ... Olympus Camedia C-60 Zoom Digital Camera
Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?
Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera