Having problems with your Moultrie GameSpy 4.0 Digital Camera Deluxe ?

WHEN I TURN ON MY UNIT A MOULTRIE I40 AND HOLD DOWN THE MODE BOTTON TO GET AUTO ON SCREEN THIS IS WHAT SHOW UP ON SCREEN TRG SIC RSND PWO 00040000005000


Answers :

I had the same problem. After much testing, I realized that the SD card had a problem, so I reformatted it on the computer and that solved the problem. I may replace the card anyway, as they're relatively inexpensive.
...ACTUALLY, i DON'T THINK YOU HOLD DOWN THE MODE BUTTON TO GET TO AUTO MODE...MANUAL SAYS EACH TIME MODE BUTTON PRESSED IT WILL ADVANCE TO NEXT MODE SEQ.=SETUP>AUTO>HANDHELD>BACK TO SETUP.
IF THE BUTTON IS NOT PRESSED, CAM SHOULD GO BACK TO AUTO MODE AFTER 4 MINS. AND GREEN STATUS LIGHT FLASHES FOR 30 SEC. NOW RDY.
Repair Help & Product Troubleshooting for Moultrie GameSpy 4.0 Digital Camera Deluxe

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

WHEN I TURN ON MY UNIT A MOULTRIE I40 AND HOLD DOWN THE MODE BOTTON TO GET AUTO ON SCREEN THIS IS WHAT SHOW UP ON SCREEN TRG SIC RSND PWO 00040000005000


I had the same problem. After much testing, I realized that the SD card had a problem, so I reformatted it on the computer and that solved the problem. I may replace the card anyway, as they're relatively inexpensive. ... Moultrie GameSpy 4.0 Digital Camera Deluxe

I just received the RebelXS 1000D for Christmas and when I follow the quick start guide and get to step #7 the subject matter does not show up on the LED Screen and only the Full Auto and ISO Auto prompts just show up on the screen. When I push the DISP button it disappears but the subject matter does not show up on the screen for focusing. What am I doing wrong?


Does this camera have "live view" capabilities? If so, there should be a button for "live view". ... Canon Rebel XS / Eos 1000D Digital Camera with EF-S 18-55mm f& EF 75-300mm f Lens

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

I put in new batteries in my Pentax ist-D and now the auto focus will not function. I get no beep or light to indicate when it is in focus because even when I move the button from M to Auto, the view finder still shows the M on the screen. All was working fine until now.


Remove the lens and clean the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. Re-attach the lens and make sure the ring (if you have one) is set to "A". ... Pentax *ist DL Digital Camera

I cannot get the screen to come up. it just shows the words auto.


... Canon PowerShot A540 Digital Camera

Hello. my fuji s20 pro. powers up.lense moves out lcd shows menus. so does veiwfinder,the shutter button does nothing when pressed and i get black screen. also when you select record it shuts down. ive tried auto etc with no change.if its the ccd are they still repairing free? any help appreciated.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Fuji FinePix S20 Pro Digital Camera

Just bought the canon Rebel and can't seem to find the right screen to get the LCD screen to show what I am taking a picture of. I can look through the little viewfinder, but can't get it to show on the screen until after I review it after I take the picture.


When i was looking at this camera at henry's (the XS) the man who was helping me told me to hold the SET button down.\015\012i hope this helps :D ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Canon powershot A85=i cannot get the icons off the viewing screen-on left side going down i have the drive mode icon, evaluating metering icon, 1/2moonL con=fine compression Large, on top of screen going across i have auto flash fire icon, red eye reduction icon, auto rotate icon--how can i get ALL OF THESE OFF and just have NO ICONS on screen??please help...thanks...i tried default, and it will NOT take all the icons off....


If you have a view button, press that a few times. ... Canon PowerShot A85 Digital Camera

My Sony A700 works ok in the P,A,S and M modes. However when set in Auto mode the lcd shows Portrait. When in Portrait it shows Portrait. When in Landscape the lcd shows Portrait. When in Macro it shows Manual.When in Sports action it show Manual. In Sunset it shows Nightime. It also shows Nightime in both the Nightime and Memory Recall modes. The +/- button calls up the ISO screen instead of the ev screen. What's the solution?


Has it been serviced before? I remember one A200 with a very similar problem. There was a flex cable broken inside - the owner had given it to another technician before me and he managed to brake it. I think it could be a bad connection or some liqui ... Sony Alpha DSLR-A700

Screen desplay I turn it on, and it shows that it is on but the screen is black..Every now and then when I turn it on the screen will come up but then it goes away. i can't get it fixed because I have lost the receipt! I can plug it into the computer and the pictures show up but i cant see anything on the camera screen. can anyone help me?!?! PLEASE AND THANKYOU


Mine just started doing the "Black Screen of Death" that according to numerous 'net sources is also quite common with Sony products. Since mine is almost two years old and out of warranty, and has seen somewhat moderate use , I took it carefully apar ... VuPoint DC-MDV330-VP Digital Camera

Hi, I have a Canon IXUS 95IS camera.. For some reason, when I attempt to take a photo, the LCD screen isn't displaying what is actually in view? In movie mode it comes up on the screen but when i flick it to Auto or camera mode, the screen goes black and only shows the little icons... Weirdly enough, it still takes the picture but the really annoying thing is it doesn't show up on the screen what you're taking a photo of so it makes it really hard for the person taking the actually photo... can


Ah yes! you have pressed the display button. Turn the camera on and you see the icons in the display, look for the Disp button and press it, the display will cycle through its modes icons, black, image and icons. ... Digital Cameras

Black screen I seem to have done something which is preventing my camera from taking photos and here it is, Christmas Day! when I turn it on I get a black screen, I have been able to display a slideshow of the photos I have taken recently but cannot get a screen at all to show what I am aiming at and/or the past photos...help


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Blank screen i was taking photo and i think the battery went off and the lense could not go back inside, it took like two days for me to replace the battery. When i put a new battery, later the screen went back inside but caanot open. the screen still black. when i press the on button, it shows the power on the auto only and cannot show any picture. what could be the problem? thanks


Ssue:\015\012\011\011The LCD/Electronic Viewfinder will not display an image or the image is distorted.\015\012\011\015\012\015\012\015\012\011\015\012\015\012\011\015\012\011\015\012\011\015\012\011\011\015\012\011\015\012\0 ... Canon PowerShot A520 Digital Camera

Only Red When I turn the camera on the screen shows only a blur and not of the image of what I am taking, but just a color blur or a white blur, depending on the lighting. when I take the picture I get what shows on the screen. When I turn off the display and take a picutre the picture comes out like what is on the screen. Please help


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot S500 IXUS 500 Digital Camera

My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter


I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera

The screen reads "lens error, restart camera. I can not get the lens to retract. I can not get the power to stay on. The cannon screen shows up momentairly - but fades to black and the message appears.


Remove the battery, let it sit for at least 2 hours, then put it back. \015\012put the batteries back, then gentle push the lens sideways to free its stuck part. if the error still occurs and the lens is not retracting, consult the\015\012warranty f ... Canon PowerShot SD1000 Digital Camera

Turning the camera to manual or auto shows up a black screen...while focusing the objects or things does not show anything ..just a black screen appears,plesae provide solution for this.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot A470 Digital Camera

Whenever I turn my camera on, all my LCD shows is a black screen. I can still take pictures but they all show up as black screens. Also, I can still view all my old pictures that I took before this phenomenon started happening. Are there any suggestions to what I can do to get rid of this problem? Thanks.


Hi, ... Kodak EasyShare M863 Digital Camera

When I try to take a picture, the LCD displays a lot of colorfull squiggly lines instead of the scene that I want to capture. When I turn it ON, the Zoom lens extends normally, then the colored lines appear with the following settings on the screen. Auto, 1M 178, ISO 400, ! plus a hand icon, AUTO, 4, F2.8. No matter which mode I choose, the same thing happens. Looking through the EVF shows the same thing. Note; I can view several good pictures that I took before the problem showed up. If I


This would be caused by a defective CCD sensor inside rad this advisory from canon below:\015\012\015\012http://www.dpre ... Fuji FinePix S5000 Digital Camera

Lens conversion I often use a telephoto lens or another type of lens such as a panoramic. I cannot get my camera to switch back to normal lens usage. I do have the Conversion Lens: OFF in the menu option. In the screen though my camera still shows W========T there is no other. Any suggestions? Usaually there is a line between the W and the T to show zoom conversion. I cannot get that back.


Check the smart zoom precision zoom setting ... Sony Cyber-shot DSC-H2 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

The camera is brand new and when I put in the battery and turned the camera to Auto focus mode - I don't get a picture in the LCD screen but instead I get battery power information indicators that I am in full auto mode and the quality of the picture I plan to take - where is the display?


Check the manual and if it does not do what it is meant to do then bring it back to where you bought it for an exchange.Do not waste your time with it. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I have a Moultrie DGS-200 game cam and i can't get the LCD screen to show anything. I replaces the 3v battery and I get some text on the screen, but you cant read it. any suggestions?


Lcd screen is not clear all info cant be seen just little black specs from numbers and letters ... Moultrie MFH-DGS-200 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4593 seconds