Having problems with your Moultrie MFH-DGS-100 Digital Camera ?

Camedia 4.1 installation error

\015 When installing 4.1, I get an error 0x80040707 Dll function call crashed Mfcdll.checkQTVer.\015\012I have tried to "run as" with unchecking the "protect my computer" box but this does not help.\015\012I have upgraded my motherboard to an intel since I last run this program. I'm using XPpro as I did with my other MB.\015\012Any suggestions please.\015\012I reinstalled Windows XP Pro and I cannot reinstall Camedia Master 4.1 for my Olympus camera, a Camedia D-560Zoom. I have searched the Olympus web site but have found no provision for technical support.Siskiyou\015\012tryin to install software for camedia 4.0 after upgrading to a quad, i get the same error message everone else is having tried doing the install in unprotect mode and still had the same error\015

Answers :

You did an XP upgrade installation, this did not help.

You need to save all files and software and setup XP as a new system, and then install camedia.
If you're getting this error message as part of an installation or upgrade routine, here's one of the easiest ways to circumvent the problem:
\015\012
    \015\0121. Go to the directory that holds the file for launching the installation (for example, Setup.exe).
    \015\0122. Right-click on the installation file and select Run As.
    \015\0123. Uncheck the box that says Protect My Computer And Data From Unauthorized Activity, and click OK.
\015\012Alternatively, if you're running this installation from a CD, you may need to simply clean the CD and try the installation again. Another possibility for resolving this error is to run Windows Update on the system before running the installation routine.
\015\012
\015\012This error might occur if there is a missing or invalid path in the registry. These registry entries need to be fixed in order for the installation to complete successfully.
\015\012
\015\012Please CLICK HERE for step by step instructions.
\015\012
\015\012After all is said and done, and you still get the error, it may boild down to a vendor software problem, and not with your PC at all.
\015\012
\015\012Thank you for using FixYa, a FixYa rating is appreciated!!
Repair Help & Product Troubleshooting for Moultrie MFH-DGS-100 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camedia 4.1 installation error


You did an XP upgrade installation, this did not help.You need to save all files and software and setup XP as a new system, and then install camedia. ... Moultrie MFH-DGS-100 Digital Camera

Trying to install camedia master pro 4.1 software keep getting dll install error dll mfcdll.checkqtver and 0x80040707


Quick time is installed--but Camedia will not install????? ... Olympus Digital Cameras

Camedia 4.1 installation error


I have the answer!\015\012I had same problema nd found solution on another board.\015\012It is a quicktime error.\015\012Download new quicktime software from here;\015\012 ... Moultrie MFH-DGS-100 Digital Camera

When I install a new Olympus XD 1 gig memory card in my Olympus Camedia C-50 camera it says card error with an exclamation point.


The problem is that the largest xD card that your camera can support is a 256mb card without the letters M or H in front of 256mb. The 1gb card is not compatible.\015\012\015\012There is a link on the Olympus website page that allows you ... Olympus Digital Cameras

Wenn i install the disney pix video editing software my computor gives an fatal error and restarts. After the restart it keeps showing messages it can't install the camera drivers and software. I did an format c: and new windows xp installation. The same problem again after new installation. How to solve this problem? I think there's an error in the installation cd.


I'll apriciate your website and it came up high in the google list. But i bought a new product that doesn't work. I'm not willing to pay for a solution. So i looked a bit furder and posted the problem by digital blue. Waiting for a reply.... ... Disney Pix Micro Digital Camera

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.


The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the ... Kodak Easyshare M753 Slim Digital Camera

Lens Error I recently had a problem with my Casio QV-R4... every time I'd turn it on, the lens would retract and I'd get a "LENS ERROR" message on the screen. I talked to customer support and they told me that Installing the new version of their firmware, v1.01 would fix this problem. I've since installed the new firmware version, but I am still receiving the lens error. Has anyone else encountered this problem? Does anyone know how to fix it? Please help!!!


As solutions 1 & 2 indicate, lubing the gears works!! This is a great camera, so I hope all of the QV-R4 owners try this. I may become a maintenance item for the camera.\015\012 \015\012I have a few a ... Casio QV-R4 Digital Camera

Lens Error I have installed new batteries in my camera, and when I turn it on, I get a message that says Lens error. The batteries are installed correctly, what do you think the problem may be. Thanks


It sound like your lens is either jammed or the motor that causes the lens to open has a problem. First try spraying a can of compressed air around the lens while you turn it on. Also make sure that you are using high output batteries. ... Vivitar ViviCam 5386 Digital Camera

When connecting the Kodak C913 to the computer, the USB hub will not receive information from the Kodak. The driver is failing for some reason, giving the error message (during reinstallation of the drive): An error occured during the installtion of the device. A service installation section in this INF is invalid. I have downloaded the software off the site and installed off my disc, however nothing seems to work.


Possible solutions:\015\012Remember you need to turn the camera on when transferring.\015\012Try a different USB outlet\015\012Try a different cable\015\012Try a different computer.\015\012\015\012If all fails plea ... Kodak EasyShare C913 Digital Camera

My web cam Vimicro ZS011 is not working in win7 64bit I am installing driver from a CD that comes with this Camera. After installing files, 2 error came with OK button CallClassInstaller(REMOVE) CopyOemInfFailed. Then go to Vimicro's web site and download a driver for my web cam.This time these error was not coming in WinXP 32bit in another computer and it was working properly. please tel me the solution.


... Digital Cameras

I have a Canon EOS 50D Digital Camera and use 3 different Canon Lenses. I am getting "Error 30". I have taken the internal battery out and re-installed the firmware. At times I can shoot quite a number of shots before getting the error. But, once I start getting the error, it comes about every 4 or 5 shots. I believe this is very similar to the "Error 99" in the Canon 30D, which I also have. The 30D has been sent to Canon for repair and worked for a while and now it gets the Error 99 every coupl


Here is a link about err 30:\012 http://photo.net/canon-eos-digital-camera-forum/00WcpB\012\012\012I hope this helps! ... Canon EOS 50D 15.1MP Digital SLR Camera Digital Camera with EF-S 18-200mm f/3.5-5.6 IS Standard Zoom Lens

On my Canon EDS 1100 D Digitial camera I was taking a series of pictures when an error appeared on thescreen Err 20 Shooting is not possible due to an error. Turn the camera off 7 on again or re-install the battery. I tried those instructions but still the error appears - How do I fix the error please


... Canon Digital Cameras

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

Installation Problem I cannot install the driver for my Digimax S800. I even downloaded the drivers to make sure it wasn't a problem with the disk, but it still came up with the same error message: "An installation support file could not be installed, the specified module could not be found" Can anyone please help?


Try NOT using a driver.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireW ... Samsung Digimax S800 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I/o error I installed my Fuji software onto new Lenovo laptop. When finished, I turned on the connected camera via USB and then I get an I/O error on the computer screen. Then I went to Fuji website and downloaded latest update (I think) and I still get the error.


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Fuji FinePix S700 Digital Camera

I tried to install software which came along with my digital camera nikon coolpix s3000. After installation I opened the icon but it showed some error. I need to transfer pictures from camera's internal memory to sd card. please help me to install my software & transfer the pictures. Thanks


If you need it, you can download the current versions of all (free) Nikon software from\012\012\012http://support.nikontech.com/app/answers/detail/a_id/61The best way to download pictures from your camera to your computer involves r ... Nikon Coolpix S3000 Digital Camera

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

CD installation error


... Digital Cameras

Problem installing Nikon View - "Locale does not match" error


When the Nikon installer runs it checks for certain files before performing the update. If it cannot find the require files it displays the "...locale does not match..." error.\015\012Verify the following if you experience this problem:\015\012\015\0 ... Nikon Coolpix 5700 Digital Camera

Driver error, will not install


\015\012artik cek git ustata ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Problem installing Nikon View - "Locale does not match" error


When the Nikon installer runs it checks for certain files before performing the update. If it cannot find the require files it displays the "...locale does not match..." error.\015\012Verify the following if you experience this problem:\015\012\015\0 ... Nikon Coolpix 3200 Digital Camera

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.


SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras

Have an Olympus Digital Camera FE-280 and had and put the Olympus Master 2 disk into my computer. Was running fine until I tried to install an upgrade that Olympus sent me. Now I am getting an error message from the Microsoft Visual C Runtime Library that says the following "Runtime error! Program C...Application has requested the Runtime to terminate in an unusual way. Please contact the appli8cations support team for more information." I think it may be having a problem with the Family Tr


Before anything else, DO system restore to bring you back to a date where you didnot install Master2.\015\012\015\012another way is:\015\012you can try to delete it manually on your registry. \015\012go to registry and control ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0995 seconds