Having problems with your Mustek MDC 5500 Digital Camera ?

When turning the camera on. The mode settting screne comes up far a few seconds,then a messege pops up saying: Lense process to stop,and then the camera shuts down,not allowing the lense to advance. The battery is new and works fine.


Answers :

Hello

The problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Regards
Andrea
Repair Help & Product Troubleshooting for Mustek MDC 5500 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When turning the camera on. The mode settting screne comes up far a few seconds,then a messege pops up saying: Lense process to stop,and then the camera shuts down,not allowing the lense to advance. The battery is new and works fine.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Mustek MDC 5500 Digital Camera

Fine-Pix A400 is showing Focus Error and will not allow photos to be taken. In addition, the lens will not retract when the camera is shut off. This problem occurred after using the zoom procedure several times to obtain close-up shots. The camera has worked perfectly up to this issue. Can you suggest any solution to problem? Many thanks...


Here is a quick fix to try. If you attempted to remove the focus error doing the 3 times on and off, and it didnb't help to this. Power the camera on, you will hear the gear skipping as if it is slipping. Right at the moment you turn of the camera pu ... Fuji FinePix A400 Digital Camera

Zoom Error Can you please help... For some reason my zoom is not working when I close the camera the lense (zoom) stays open and does not shut... It does not allow me to take pictures because it is in Zoom Error... Please help.


Hi thanks for using fixya!\015\012\015\012On this kind of error, I suggest that you bring your camera to a service center or to your retailer to further check the hardware problem of your camera.\015\012\015\012Regards! ... Fuji FinePix A500 Digital Camera

I have a Minolta Maxxum 5D which I really like. I take a lot of pictures outside with my job. I have a telephoto lens and a regular lense as well. I switch lenses a good bit depending on the shot. Everything was working well until I now get a message that reads "no lens attached" when there is a lense on the camera. The weird thing is that I only get this message on my regular lense and my telephoto lens works fine. I even carried my camera by a local Minolta/Konic dealer and they were baff


It can occur if the contacts on the lens where they meet the contacts on the camera body need cleaning. Try a cotton swab lightly dampened with rubbing alcohol. ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

My D70 (which I just bought on ebay) is having problems with AF. At time the AF works fine but then for no reason it refuses to work for hours to days. I have two bodies so I can swap lenses to see that its not the lens. If I switch to manual focus, it the camera works fine. I can see the little pins around the lens fitting retract when I switch the camera to manual. Seems like a problem with the internals that control AF. No other problems are apparent to me. Any suggestions?


Sounds like a contact issue - either they are not making consistently or they are just dirty. I'd start with a good contact cleaner (Radio Shack or photo store) and spray the snot out of both the camera contacts and lense (making VERY sure to protec ... Nikon D70s Digital Camera

Memory card Our old memory card stopped working in the camera. It said "memory card error". I bought a new card, 8gb duracell sdhc card, and when I put it in it said"memory card error" again. I tried formatting the card but it would not allow me to. I put the card in my computer and the new one works fine. I gave the old card to my brother in law to look at it, but he is on vacation, so I can't test it in my computer. I put the card that came with the camera in and it works fine, but it is a mmc


Unfortunately, the A520 does not support SD memory cards with more than 2GB capacity, and doesn't support SDHC at all. (1GB max for MMC cards.) I know memory is much cheaper than when the camera first came out, but in 2005 2GB was about as large as y ... Canon PowerShot A520 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe


Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Broken Lense My VPC-E760 Sanyo camera is a little over 4 mo. old. It was dropped about the 2 mo. i had it. Then lense popped back ito place, but it makes a funny noise when turning on and off. (or going in and out when previewing pics). Last night, it was working fine then turned off, said 'lense error 25' 'lense error 22' and 'lense error 12'. I don't know why! I tried to find out what it meant, but i couldn't SOMEONE HELP!!! lens will not go in. camera reads lens error 12 and 25


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Sanyo VPC-E760 Digital Camera

I have a Sigma 17-70mm F2.8-4.5 Macro lens working on a Nokon D40X and Nikon D300. For medium to long distances the autofocus does not seem to work with this lens. I think it used to but now I notice that from about 40 feet away the autofocus does not work. The same happens with both cameras. Other lenses work fine so I don't think it is the camera. Is there any history of problems or is it a feature of the lens? thanks, Richard Brand


... Sigma Digital Cameras

I have a Canon EOS Digital Rebel XT with the original 18-55mm lense and a Quantarey 70-300mm lense. Have had all pieces for 3 years now and everything worked great until last night. Camera focuses and works fine with the small lense but with the zoom lense it will not focus and I get an Error 001 message????


This means that the communication with the Quantarey lens is not the right one.\015\012\015\012You can try in cleaning the lens contacts and the camera contacts with a pencil eraser or a white erase (flip down the camera so no particles g ... Canon Rebel XT / EOS 350D Digital Camera

I have a Canon camera, which worked fine. I had to recharge teh batteries often, that was all. Last night, i took it out. In view mode, the camera does not shut off. The moment i switch to camera mode, the lens opens out and then the camera shuts off. What do i do pls? Any help appreciated


I'm assuming you're talking about a point-and-shoot model, and not the\015\0121000D as the category suggests. Camera mode has significantly higher\015\012power requirements than viewing mode. It is possible that your\015\012rechargeable battery has d ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My Olympus 7010 is fully charged. When I turn the camera on ready to shoot a picture, the card reader light blinks and the camera shuts off. Camera works fine in menu and edit modeds so it is not the battery or the contacts. Only shuts down when in camera mode. Advice ?


I fixed the problem by pushing the lens just a bit from the side when turning the camera on. ... Olympus Stylus 7010 Digital Camera

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks


You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

This is the first time the camera has done this - it will not download the pictures onto the computer - usually the camera asks to transfer all or transfer new - now my computer won't do anything - in fact I have to shut it down manually to get it to work again, then it works fine until I connect the camera and then the same thing happens


Do what the pros do...use a card reader. ... Digital Cameras

Camera problems I installed new batteries but after pressing the power button the lense came out but the camera won't operate and now the power button doesn't even work in order to shut the camera off and the lense is still out.


Turns out the brand new batteries I installed were dead. ... Samsung Digimax S500 Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt


... Canon Digital Cameras

My Canon Powershot SD1000 acts like it shuts off when I try to upload pics to my computer. When I plug the usb into the computer and the camera into the usb the Camera will still work perfectly fine in picture and video mode, but when I put it in the mode to view my pictures because once I do that the computer dectects the camera to open the program to transfer the pictures the screen goes blank before my computer can detect it and it looks like it shuts off, but thje green power light is


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1000 Digital Camera

I have an Sony Alpha 100, when I turn the camera on with the 18-70 lense the camera makes a terrible noise and does not focus. Camera works fine with the zoom lense.


... Sony Alpha DSLR-A100 Digital Camera

I recently used my 860G on a diving trip to Roatan. After shooting some terrestrial pictures (outside the housing), I shut the camera off. When I tried to restart it, the Sea & Sea logo illuminates and the green indicator light flashes for a few seconds but the lens fails to extend. The camera shuts itself off after a few seconds. The battery is fully charged (I've tried several). The picture viewing mode works fine...the camera just refuses to enter the picture taking mode. Any help out t


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Sea and Sea DX-860G Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera problem My daughter just received a new HP635 camera for her birthday. At first the camera worked fine, but after a few minutes of use, the camera started flashing the welcome screen repeatedly and the zoom lense would move in and out over and over until we opened the battery storage compartment of the camera. Opening the battery compartment is the only way to turn the camera off. Everything on the camera becomes inoperable when this process starts which now is every time the camera is tu


I HAVE A HP R740 SERIES DIGITAL CAMERA. IT IS ABOUT A YEAR OLD. WHEN I TURN IT ON, HALF OF THE VIEWING SCREEN LOOKS LIKE A SCREEN. ... HP Photosmart 635 Digital Camera

Pentax Optio t10 says memory card error with brand new card. Card seems to be working fine. Camera wont allow me to format new card. Old card is 1gb and still works fine. new card is 8gb is this too large


Camera ... Pentax Optio T10 Digital Camera

Camera will not take pictures with the lense in the auto focus mode. As soon as you switch the lense to manual focus, the camera works just fine


Check the menu settings, make sure the camera is not set to "Manual focus" . ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I turned my camera on and the battery was too low so when it shut itself off the lense didnt go back in, now i've charged it and the lense is still stuck out. how to i get it back in so my camera will work


Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a so ... Kodak EASYSHARE M1063 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5215 seconds