Having problems with your Nikon Coolpix 2200 Digital Camera ?

On y coolpix s220, upon powering up, the screen freezes on the "Set time and date?" screen.


Answers :

Hi,

The signs you mentioned are clearly suggestive of an internal problem with the electronic circuit. The only 2 options you could try that might help :-

1. To\015\012 do such reset, turn on the camera and hold the menu button down for \015\012longer than 5 seconds. A message should hopefully come up on your LCD \015\012asking if you want to reset the camera. Select Yes and it is all done.

2. You could pull out the battery and keep the camera for 15-20 minutes.Then put back the battery and see,if that helps.

If not, you need to get the camera repaired, though on most occasions buying a new one is more economical and wise.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
Repair Help & Product Troubleshooting for Nikon Coolpix 2200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On y coolpix s220, upon powering up, the screen freezes on the "Set time and date?" screen.


Hi,The signs you mentioned are clearly suggestive of an internal problem with the electronic circuit. The only 2 options you could try that might help :-1. To\015\012 do such reset, turn on the camera and hold the menu b ... Nikon Coolpix 2200 Digital Camera

The Coolpix L4 forget its date-time settings, and there is no way to set them. menu -> set up (ok)-> date (ok)-> date (ok)-> ... the result is "Time Zone" setup screen not the date.


Hi.\015\012\015\012\015\012Nikon cool pix settings are saved into an internal memory (20 MB EEPROM I think). \015\012\015\012\015\012The internal memory is kept alive by an internal rechargeable battery, that is r ... Nikon COOLPIX L4 Digital Camera

COOLPIX 8700 Camera will not power up. Tried different fully charged batter, no go. Have not used for some time. Pwered it up once, set date and time. Would not power up after that one time. What am I missing here?


The reason I suggested i5 is that one of my cameras will not work on rechargeables anymore. You might be able to order the battery you need on line. Did the camera get damp or anything while you were not using it? If so just keeping it in a warm dry ... Nikon Coolpix 8700 Digital Camera

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.


... Kodak EasyShare LS753 Digital Camera

My Kodak Easyshare Z1275 has short battery life. sometimes even newly charged 2600 MaH batteries cause problems. Powers up, lens extends, opens screen to set time and date then powers down. Sometimes i can take a picture or two before it powers down. This is a known problem to Kodak but they want $90 to repair it. Can anyone tell me how to repair it myself. If I can't I will throw it away and use my Cannon exclusively.


Wait, do you have Li Ion batteries or Ni MH?\015\012\015\012I think that Kodak recommends Li Ion batteries which have a higher voltage on them.\015\012\015\012I got some generic Li ion battery packs off of Amazon.com, with bet ... Kodak Digital Cameras

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.


You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Received a new SD990 IS today. Charged battery, inserted and switched on. Blue Canon screen appears but no request to set date and time, and none of the buttons have any effect. After about 30 seconds it powers down again. Seems to me it must have been damaged in transit. Any advice about things to try would be welcome, but I guess I may just have to send it back. Alistair. (Edinburgh) [email protected]


Best bet is to send it back for a new one. ... Canon PowerShot SD990 IS / Digital IXUS 980 IS Digital Camera

Trying to set date and time on camera screen for canon power shot SI IS


I afraid it dont have date stamp option.Hope this helpsThank you ... Canon PowerShot S2 IS Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

I have a cannon power shot A580, about one month old and it keeps asking for the date and time everytime i switch it on, even though i have replaced the date battery and the camera batteries, and set the date and time in the menu time and time again!!! HELP


If you've replaced the date battery, then the camera is defective. Being only a month old, first recommend seeing if your retailer will exchange it. If not, Canon will fix for free under warranty. Call 1-800-OK-CANON. ... Digital Cameras

Coolpix S710 time-date setting required EVERY time


---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

I have a Nikon Coolpix S60 and need to have the date and time stamped ON my photos. My camera is set to date and time but it doesn't show up on my photos, can you help?


The date and time (and a lot more) are stored with the image in what's called the EXIF data. The software you use for printing the picture should give you the option of printing some of that data on the picture or in the margins (or on the back, if y ... Nikon COOLPIX S60 Digital Camera

I set the correct date and time, but it does not display on the screen nor the photos. how do i get the date & time to appear on photos?


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to pr ... Canon PowerShot A480 Digital Camera

Fuji finepix a400 camera. When I power it on I get the 'date/time not set message'. I can set the date / time and all in well until it is turned off overnight. It has new batteries installed and I get this message even with an external power supply attached. This is most annoying.


I would suggest going to the fuji website to download the latest firmware driver and update the firmware on the camera. ... Digital Cameras

My camera turns on, set date and time screen comes on, then once im done setting time it turns off


... Kodak EasyShare M1033 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.


... Olympus Stylus 770 SW Digital Camera

Every time I change the battery on the coolpix 995 I have to reset date and time and all other settings. I never had to do this with my 990. How do I keep all settings , including film quality , unchanged during battery change?


Your problem is that your camera actually has two batteries. There's the obvious user-accessible one but there's also a tiny rechargeable one hidden inside the camera which recharges from the main battery. The smaller battery is designed to provide h ... Nikon Coolpix 995 Digital Camera

My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75


The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras

How do I get the date and time to show up on either printed pictures or on my downloads onto my home computer? I have set the date and time but it doesn't show up on anything, even my cameras own screen.


The date and time plus a lot more information is stored with each picture as "metadata". It can be retrieved in most photo editing programs. After downloading to your computer, if you just right-click on a picture file, the date and time will appear. ... Sony Cyber-shot DSC-N2 Digital Camera

Hi, My name is vinod. I have fuji s2000hd digital camera. Every time when I turnon my camera it asks me to set the date, time and gives options like power save mode etc. I dont know why every time this is happening. Kindly post the resolution for this.


I once used finepix, and I can not fix the problem. the only way that i did is to change to another camera. I use nicon d40 now. ... Fuji FinePix S2000hd Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3018 seconds