Having problems with your Nikon Coolpix 4300 Digital Camera ?

Each time I remove the battery from my Nikon CoolPix 4300, the clock returns to a default of 2002 (in the LCD window the date shows as 000000. Each time I use the camera I have to reset the clock and date. I left the battery in the camera over night to see if the clock battery would take a charge and maintain the date and time the next time I removed the battery. No such luck. It returns to default. Is this a problem I can correct on my own?


Answers :

I probably need more details but, it sound like when you remove the battery to recharge it, the clock loses any power it had. Most people have a second battery. When the first battery begins to lose power, they insert the fully charged battery so the clock is only without power for a few seconds. Try that.
Repair Help & Product Troubleshooting for Nikon Coolpix 4300 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Each time I remove the battery from my Nikon CoolPix 4300, the clock returns to a default of 2002 (in the LCD window the date shows as 000000. Each time I use the camera I have to reset the clock and date. I left the battery in the camera over night to see if the clock battery would take a charge and maintain the date and time the next time I removed the battery. No such luck. It returns to default. Is this a problem I can correct on my own?


I probably need more details but, it sound like when you remove the battery to recharge it, the clock loses any power it had. Most people have a second battery. When the first battery begins to lose power, they insert the fully charged battery so the ... Nikon Coolpix 4300 Digital Camera

Each time I remove the battery from my Nikon CoolPix 4300, the clock returns to a default of 2002 (in the LCD window the date shows as 000000. Each time I use the camera I have to reset the clock and date. I left the battery in the camera over night to see if the clock battery would take a charge and maintain the date and time the next time I removed the battery. No such luck. It returns to default. Is this a problem I can correct on my own?


Go to the support section of the Nikon website and e-mail one of their tech people with your problem...I'm sure they can solve it. ... Nikon Coolpix 4300 Digital Camera

My Sony 7.2 Cybershot camera recently ran out of battery, so I charged it. Once it was done charging, I put the battery back in. The screen showed up asking me to insert the current date and time, so I did so. Next, the zoom lense went out and in, out and in, and out and in while the screen said "Access". Next, it told me to turn the camera off and on again. Nothing happens when I do so, and I've done it about 10 times to no avail. Is this a fixable problem?


... Sony Cybershot DSC-T200 Digital Camera

Battery Drain I have a constant 70ma drain from thebatteries when turned off. I insert the plug into the external 5vdc to disconect the batteries from the camera and this splves the problem. I now find that the time and date have to be entered or just press OK for the camera to operate. Is there a second internal battery for the clock alone. Thank you Richard


Have a look:\015\012\015\012http://www.fujifilmusa.com/support/ServiceSupportProductContent. ... Fuji FinePix S7000 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75


The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras

Batteries This camera has been the worst digital camera I have ever used.  The pic quality is fine.  The ease of use is fine.  The problem lies in the battery longevity.  Maybe that is not even the right description.  I will put in new batteries and only use my camera for a short time.  The next time I go to use the camera it is not at all uncommon for it to not turn on.  Even though it has new batteries and was not left on, the batteries are dead.  It happens with the rechargeable as well as re


This model of camera does drain your batteries while it's off. Numbers I've seen in online discussion boards from people who used a meter to measure the amount of drainage include 79 to 100ma. ... Kodak EasyShare C743 Digital Camera

Install new batteries,within minutes of useage battery indicator starts flashing & short time later camera says change battery &camera shuts off. first 3 yrs batteries would last for weeks, i could take a1000 shots plus view edit etc. i tried new charger &batteries ,non rechargeables plus i changed the internal battery for date& time,took camera to shop and had it checked for shorts and discharge problems they said everything was within specs.i have been told all canons do this after 3 or 4 yrs,


... Canon PowerShot A710 IS Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

December 31/09. I moved from the MST zone to the PST zone. On the atomic clock I moved the button to change the zone. The clock seemed to work as it should for about 10 days. It is now late December and suddenly the date changed to the new year about December 26. December 30, I decided to change the batteries. The date changed to Tues Jan 1, with the time completely out of whack. Temperature seems accurate but I cannot figure out how to change the date and time. It has date and time butto


You can get the manual on link below. You need model # though.\015\012\015\012\015\012http://www.skyscan.info/content/manuals.html ... Sharp Digital Cameras

Camera hangs I cannot use the camera, every time I open it the screen is blank and the green light is lit on and cannot turn it off, there are times that I can use it but can only take only one snapshot and the camera hangs. I even removed the small battery a CR1220 and return it so I have to adjust the time setting, as I change it the camera hangs also. I'm using a NiMH battery.


Well done ! It sound like a bad contacts issue. ... Canon PowerShot A400 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

I have a cannon power shot A580, about one month old and it keeps asking for the date and time everytime i switch it on, even though i have replaced the date battery and the camera batteries, and set the date and time in the menu time and time again!!! HELP


If you've replaced the date battery, then the camera is defective. Being only a month old, first recommend seeing if your retailer will exchange it. If not, Canon will fix for free under warranty. Call 1-800-OK-CANON. ... Digital Cameras

Hi, I have a Nikon D300. First problem - The battery started showing empty / full / then empty again. Bought a new battery, worked first time, then the same problem empty / full / empty. Change the camera, kept the 2 batteries and charger. First time I tried to use the 2nd camera, both batteries showed empty. Change the batteries and charger. Charged the two batteries but still show empty! What do I do next?


A capaciter in your camera is not working properly and is discharging your battery even when the camera is turned off (this is a cheap problem to fix but must be sent back to NIkon for repair ... Digital Cameras

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?


... Canon PowerShot SX100 IS Digital Camera

Sony Cyber-Shot DSC-P31 Digital Camera- the internal button battery will no longer hold a charge to remember the date settings and is apparently discharging the AA batteries by attempting recharge. I have to remove the AA batteries after using the camera each time and reset the date. Is there a way to access and replace this internal button battery?


Only with screwdriver and soldering tool :-( ... Sony Cyber-Shot DSC-P31 Digital Camera

My Kodak Z650 camera just won't switch ON. I used the camera a few weeks ago and it was working fine and after using it, I removed the battery and packed it away for next use. The next time i tried using the camera it just wouldn't switch ON just like that. I bought new batteries it didn't help. The camera has never been dropped or anything but it won't switch ON.


Hi there Make sure the new batteries are fully charged before used. After that remove the memory card & try to power on. If its not ON then i suggest you remove the battery & check the that place for any sulfur layer( green colored ) are the ... Kodak EasyShare Z650 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


Hi there lakispapNormally , this error would indicate a lens error where the lens cannot extend out of the barrel. Usually it's because of accumulated dirt in the lens sheath , but since you camera is only 2 weeks old , this is barely an ... Sony Cyber-Shot DSC-P10 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P10 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...


The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Maintaining Date/Time I've recently inherited a Fuji E510 camera. Works well enough except that it loses its date/time settings if I take the batteries out for even the shortest period of time (for example, when changing low batteries). I see no reference in the manual for the location of the "keepalive" battery cell nor can I find anyplace on the camera housing that indicates where a keepalive cell would be inserted. This leads me to believe that this camera model either has an incredibly st


This is case of a 'keep-alive' battery going flat and unfortunately is on the main p.c board and you will have to dismantle the camera starting from the rear to get to it. Located next to the flash main capacitor on the main board. ... Fuji FinePix E510 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6500 seconds