Having problems with your Nikon Coolpix 5700 Digital Camera ?

A message in red appears when I turn my digital camera on probleme optique ( in French)


Answers :

Repair Help & Product Troubleshooting for Nikon Coolpix 5700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

A message in red appears when I turn my digital camera on probleme optique ( in French)


Try these procedures. ... Nikon Coolpix 5700 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

When I turn on my panasonic digital camera DMC-LZ7 (with fresh batteries) it attempts to focus but cant then displays a message saying "turn off camera and turn back on again". If i do this, the same problem appears


Looks like a problem with the CCD sensor. Try removing batteries, and SD card for 5 minutes. Replace new batteries and try again.If issue persists, you will have to get the piece serviced. ... Panasonic Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

I am using Olympus Evolt-e-300 dslr for the last 4 years until recently occurs a problem,after taking a shot,black screen with message D:3C85 appears and read/write lamp with red light blinks continuously till camera was turned off and again on,although image was record I update the camera firmware through olympus website but to no use,it is still there,I also check the memory card it is perfectly fine(Sandisk Ultra 4GB 30mb/sec read/write speed) please advise what to do???


Hi,This is a common problem and discussed many times in different forums.This issue has been there for a while. This problem is related with the shutter and gear assembly. No doubt you would see many threads where either firmware update o ... Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

I have an Olympus Stylus Tough -6000 digital camera and when I turn it on a message appears on the screen that says "Card-Cover Open" and it won't allow me to operate the camera. The problem is that the card cover is NOT open, the battery and USB covers are securely closed, so I don't know what to do. Please Help! Thanks


Is the card all the way in? ... Digital Cameras

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

My Sony DSC-H50 Digital Camera has the following symptoms. When I turn it on, it appears as if it tries to move the lenses, but they do not move. A message appears on the screen turn the camera off an on again. This does not work. Removing the battery and then turning the camera back on does not work either. I tried initialize and reste the parameters to default, but that does not help either.I can view pictures that are stored on the camera


Http://www.sony.co.in/support/product/dsc-h50\015\012\015\012\015\012\015\012 ... Sony Cyber-shot DSC-H50 Digital Camera

Digital camera i recently bought a digital camera,we went to the beach and all of the sudden the lens would not come out.the camera makes an effort but stops and goes back in.on the display screen an error message appears telling me to turn off and turn on again,plz help


Hey everardo,\015\012 What is most likely going on is that something (i.e. sand) is obstructing the movement of the lens. You can try gently blowing compressed air into the sides of the lens to try and dislodge whate ... Digital Cameras

For fully charged NI Mi batteries 2700mA, when I turn on my camera I may or may not get the red low battery sign, I may or may not get over 15 shots, and I end up to the "instruction" that my batteries are low and must change them. Turning on and off the camera, everything is OK, I can take shots, and the problem returns. I have the PowerShot A570 IS Ai AF Cannon digital camera. I have a new charger that when the LED sign is on Green I know that the batteries are full. Is the problem on the cam


How much time between shots is it? ususally there is a 3 minute none use shut down timer or warning light. so if it is more than 3 minutes from the time you take one picture to the next picture then that might be your problem. also these new digital ... Canon PowerShot A570 IS Digital Camera

I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,


The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens

Level Warning Whenever I turn on my camera (Digital Rebel 300D), my LCD monitor flashes this: "C bc". The manual tells me this means "Level Warning". What level is it referring to and how do I fix so that this no longer appears.  Now, when this message appears, I simply tap the "shoot" button and it goes away until next time I turn on my camera...


Battery level. charge it or replace it if it does not come up to full power state. the camera has a batter meter. refer to the manual and see if the battery is low. it requires you to push a few buttons while looking at the data window.not real ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Hi, I have the Sony Cyber Shot DSC-W130 digital camera - whilst away on holiday a message appears when I turn on the camera "turn power off and on again". I have done so many times but it still comes up with the same message - hence not allowing me to take any pictures. I can view existing images through the window and I can download them fine - I just can't take any new ones. There is plenty of space on the card and a full battery. Any suggestions?


Hi. Yes. turn it on and go to the menu. find reset and reset the camera. this will return it to factory settings.\012\012if you can't get into the menu or if the steps above do not solve the problem do what is called a hard reset. Re ... Sony Cyber-shot DSC-W100 Digital Camera

Same problem I have exactly the same problem. It appeared suddenly, I just turned it on once and the lens started protracting and retracting followed by the message ''turn camera off and then on again''. There is no physical damage to the camera. Did anyone get to fix it?


There might not be a physical damage outside which will be easily noticeable but it if you have dropped it once hard the lens array which is a sensitive part gets defective. try tapping on the device while the camera is switched on. if it works then ... Panasonic Lumix DMC-LZ7 Digital Camera

Color problem The same issue as the one who asked about the color problem. We bought this Olympus FE-280 Digital Camera March 2008 i think. It started to have this color problem last month which is April. The problem is whenever I turn on the camera the screen has this red violet color and it doesn't capture good photos. What do you think is the problem? How can I solve this? I already tried removing the battery and the memory card and tried changing the settings but still it never changes. Help


Try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings a ... Olympus FE-280 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?


Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

I have a Olympus X-560WP & when I turned it on, the screen appears with a P in the left corner, a red flash symbol in the right corner & it says on the bottom +1.0 1/30 F3.7. It isn't allowing me to use any of the buttons on the side or change any of the settings. I thought if I reset the camera it would fix the problem but it won't allow me to do that either. I'm on holidays at the moment & haven't seen any camera repair shops so I can't even take it there. Do you know what the problem is o


You can try to reset it by:1. Turn it off, 2. Remove battery (the big one)3. Remove the little round battery (which supply power to rom chip)4. Remove memory card.5. Leave it for 15 minutes. ... Olympus Digital Cameras

When i turn my Digital Camera Kodak EasyShare DX 4900 the message E11 appears but the camera does not turn on.


Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EasyShare DX4900 Zoom Digital Camera

My cybershot DSC W270 zoom will only go up to 1.6x then it stops and an error message appears telling me to turn the camera off and then on again but this does not solve the problem. I havn't dropped the camera and all was working well until this problem suddenly occurred. Please advise.


If turning the power off and on again doesn't solve the problem, the Sonyusa.com's eSupport website says to send it in for service.\015\012\015\012The camera was listed as sold in Canada and Latin America,\015\012\015\012and t ... Sony Digital Cameras

My canon EOS 100D digital SLR is saying 'card write protected' when ever I turn it on. It just started to appear on my screen for no apparent reason one day and it won't let me take pictures anymore. It's not the card it's the camera, I have tried sliding the switch on the side of the memory card and even tried new cards in my camera but it happens with every card I insert. I have googled the problem and can't find any solution to fix the problem. Would be very grateful if you could help at all


... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6239 seconds