Having problems with your Nikon Coolpix 990 Digital Camera ?

Menu buttons not working

\015 I recently purchased a Nikon 990 second-hand, in order to try out infrared photography. However, the up and down (though not the left and right) menu buttons are not working, and I am rather loathe to spend $200 for it to be looked at (!) by an authorised Nikon repair center (the camera being well out of warranty).\015\012\015\012As such, is this likely to be a relatively simple repair, and if so, how would I go about it?\015\012\015\012Thanks!\015

Answers :

You may contact SP-TS.com, they are an Authorized Service Center for an estimate.
Repair Help & Product Troubleshooting for Nikon Coolpix 990 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??

... Nikon S8100 Digital Camera

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??

The symptoms indicate your main battery is failing. Either is not charged or is failing to take a charge. ... Nikon S8100 Digital Camera

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec

Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.

Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera

My Nikon s8100 suddenly stopped working. It will turn on, but the menu buttons won't respond. No error messages. No damage. No unusual sounds. The menu button will work until I hit the shutter button. Then, it doesn't record a picture, and everything freezes up. Any ideas??

Hi , may be a trouble in control panel or damaged component in main PCB,contact Nikon service.Regards ... Nikon S8100 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

Wickedwahine Just today, the directional buttons froze up so that the up/down, left/right arrow buttons no longer work to scroll through pictures nor can I use them to navigate menu items. I removed the battery for 1 min as suggested in troubleshooting but it still didn't work. I also tried to press and hold the control and power button (just a guess) trying to trigger a reset. The directional buttons worked very briefly after that but it might just have been a fluke.

This may be an intermittant on the circuit board or the switch assembly inside of the camera. Was the camera dropped?\015\012\015\012I would not suggest trying to fix this yourself unless you have experience in this type of service and ha ... Sony Cyber-shot DSC-W50 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac

I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Hey there my camera lcd screen doesnt turn on when i turn on my camera, it stays black and i have tried some of the suggestions i saw on ur site like holding the menu button for more than 5 seconds and resetting it.it worked bt once i turned it off and on agin it did the same thing, i repeated the above suggestion, it worked again bt the moment i turned it on n off again it just stayed black, and now the menu button isnt responding at all wht do i do its an olympus FE-320

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Olympus FE-320 Digital Camera

Having same problems,nothing works...tried holding down on button and menu button...nothing.tried on button with trash button...nothing.only thing that has happened is camera has had little fit and lens remains open but nothing else working...help, am goin on hols on thurs :(

Hi I am Vortash most people forget that the batteries supplied with most cameras are not of supreme quality and after a short time will stop charging .. true the indicator says they are charged as they are shorted out but in actual fact they are dead ... Pentax Optio M20 Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Sony DSC F-717...turn on camera, menu apppears...can do anything in menu, but cannot exit menu. pushing menu button to escape does nothing..reset button, remove battery, hookup to dc source, nothing works.

Sent it to sony ... Digital Cameras

My new canon 7D is 2 months old. Today all the menu buttons stopped working. MENU not working AF DRIVE not working ISO not working....all of them....nothing. No access to anything. Changed lenses and still nothing????Can't view photos either ???

Follow the link.\015\012http://www.dpreview.com/previews/canoneos7d/page8.asp\015\012Make sure you unlock that key mention below.\01 ... Canon EOS 7D Digital Camera

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.

Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

I have a Canon Rebel Xt that occasionally has problems with the shutter button suddenly not working. The camera is still on and all the menu buttons continue to work. It acts like the lens decides to quit communicating with the camera body. The only fix I have found is to take the battery out for 10-15 sec. and it works like normal. Any advise on whats going on would be great, Thanks Brandon

... Canon Rebel XT / EOS 350D Digital Camera

My Olympus STYLUS TOUGH 8010's buttons are not working. The top button to turn on and take pictures are working fine but the menu buttons all on that side are not responding. How do I fix it? Is it on a weird setting?

... Olympus STYLUS TOUGH 8010 Digital Camera

When I turn on my panasonic DMC-fx12 it immediatley zooms in all the way and none of the buttons work properly, if at all. I would try to reset it, but the menu button isn't working either. This began happening out of no where. Help!

Jenny - did you find a fix - ours' has just started doing the same too!!! HELP!!!! ... Panasonic Digital Cameras

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas?

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas ... Digital Cameras

MENU BUTTON I tried to access the menu on my Kodak Z612 (with in days of warranty expiration of course) and nothing happens. As if the button stopped working. Can you shed any light on this matter?

... Kodak EasyShare Z612 Digital Camera

After submerging my DSC T7 under water with the use of the proper water casing Cyber-shot SPK-THA, the control buttons to the left of the viewing screen and the focus control on top started malfunctioning. I pulled out the battery and memory card and tilted the camera such that the opening for the battery slot is facing downward thinking that if water permeated the casing, it would dry out. It worked for a while but returned to the original problem. The menu button works though but I couldn't do

Other than your camera has had it, there may be some residual dampness still shorting circuits.Again remove battery and open any orifices you can and put it in the airing cupboard or any where warm for a few days then try again. ... Sony DSC-T7 Digital Camera

Hi there, I was taking photos with a 3 years old canon ixus 70 and suddenly the screen became black!! from then taking picture was impossible it comes out black too. All the menu buttons work properly, battery is full, sim card is correctly installed, video sound works but no images. This camera hasn't never been dropped and the lens looks pretty good. It doesn't come from the DISP. button because I first thought it was coming from this one but finally not... Any idea, ever heard about that prob

First verify that your camera is actually an SD500 (takes SD cards) and not an S500 (takes CF cards). If your camera is actually an S500, this would probably be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may ... Canon PowerShot SD500 / IXUS 700 Digital Camera

When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?

You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap

Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

I have a d80, i have tried to take a photo when i press the button it wont click, also the playback button and the menu won't go on. I get r11 coming up. I have taken the lens off and reconnect to see if that was the problem but that didnt work. APpreciate any other tips to get it working

If your lens has an aperture ring, do note that most of these lenses require the ring to be locked at a certain position for it to work. In the course of using the lens, you may have accidentally unlocked the aperture ring and moved it out of positi ... Nikon D80 Digital Camera with 18-135mm Lens

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please

Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1413 seconds