Having problems with your Nikon COOLPIX L18 Digital Camera ?

I ERASED BY MISTAKE, THE COOLPX L18 FROM MY COMPUTER, AND NOW MY COMPUTER IGNORES THE CAMERA. DO I NEED A DISK TO INSTALL THE PROGRAM? I TAKE PICTURES IN MY CAMERA BUT THEY WONT GO INTO THE COMPUTER. I HAVE DONE THIS OPERATION BEFORE, BUT NOW, NOTHING HAPPENS WHEN I CONNECT THE CAMERA TO THE COMPUTER. IS THERE AN INSTALLING DISK WHICH I SHOULD GET AND PERHAPS I HAVE MISPLACED IT.


Answers :

You can probably download the software from Nikon.
Repair Help & Product Troubleshooting for Nikon COOLPIX L18 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I ERASED BY MISTAKE, THE COOLPX L18 FROM MY COMPUTER, AND NOW MY COMPUTER IGNORES THE CAMERA. DO I NEED A DISK TO INSTALL THE PROGRAM? I TAKE PICTURES IN MY CAMERA BUT THEY WONT GO INTO THE COMPUTER. I HAVE DONE THIS OPERATION BEFORE, BUT NOW, NOTHING HAPPENS WHEN I CONNECT THE CAMERA TO THE COMPUTER. IS THERE AN INSTALLING DISK WHICH I SHOULD GET AND PERHAPS I HAVE MISPLACED IT.


You can probably download the software from Nikon. ... Nikon COOLPIX L18 Digital Camera

When connecting camera to computer, the connection refuses to turn green to upload photos. It has always workd fine until now. The hardware did not show on computer so, re installed camera CD and restarted the computer and still nothing. The camera operates under Picasso, but nothing is being recognised.


Try doing it this way:\015\0121 - Close all applications then shut down your computer, to power off.\015\0122 - Turn the computer back on and wait until it has finished restarting.\015\0123 - Once ready, then un-install ... Samsung Digimax L730 Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

- I can't use my C195 camera with Vista. I tried to download the software; a Kodak icon appeared on the C Drive but I can't download my pictures to the computer. - I try to download the Kodak software for the C195 camera on another computer which has the XP operating system, but it doesn't work either. My other camera of the Z series from Kodak is much more handy, because it has an installation disk and it's easy to download my pictures from that camera. Now. what shall I do with the C195 - Vi


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak Digital Cameras

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have tried t


Do what the pros do....use a card reader instead of the camera. When you plug it into the USB port, an icon will appear called "NO NAME". Double-click on it and the pics will open in "preview". From there, you can import them to a folder you create o ... Canon PowerShot G10 Digital Camera

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have trie


1. With the camera on and in playback mode, plug the cord from the camera into the Macbook. It should appear on the desktop as a drive, probably called "no name". If it doesn't, don't worry...the next solution always works and it's the one the pros u ... Canon PowerShot G10 Digital Camera

I received a Sanyo VPC-E1292 digital camera but the camera will not format or read the memory cards. I've tried three different cards and nothing works. I've also tried to format it using my computer but nothing is happening. I'm wondering if perhaps what else I can try to get this to work.


HelloOk, if you tried diffirent memory cards in the camera with all giving the same error, and tried all of these cards in the computer as well, it is most probable that the problem is with the memory cards.Have you tested thi ... Digital Cameras

I have a Polaroid i533, when I plug the USB cord into my computer, connect it to the camera, turn the camera on, no mass storage device is showing. Windows XP supposed to be plug and play. I bought a card reader, and when I plug that into my USB port, and insert the 2.0 GB SD card, it shows drive F on MY COMPUTER, but says there is nothing on it, insert a disk into drive F. What the heck? How do I get this card reader to work? Thanks!


... Digital Cameras

I am trying to download the Owner's Manual for the J10 and J12 FinePixView camera from the disk that was included with the camera as the printed version has been lost but nothing appears on the screen when I put the disk in the computer. What is wrong?


This is Fuji FinePix S8000fd Digital Camera User Manual.\015\012 ... Fuji FinePix S8000fd Digital Camera

Have Nikon Coolpix 885 dig. camera, bought in 2000, still works OK. I had been transferring the photos to my old computer using "Nikon View" 5 version 5.0.0 software that came with the camera and my Windows XP operating system with no problems. I now have a new computer using Windows 7. This is my question: Will it be OK to install the original "Nikon View" 5 disk with Windows 7 or is there a newer "Nikon View" software to work with Windows 7 and my old Coolpix 885?


Nikon View has been superceded by Nikon Transfer and Nikon ViewNX (the transfer and cataloging/viewing\302\240functions have been separated). You can download\302\240the\302\240current versions of all (free) Nikon\302\240software fromhttp://su ... Nikon Digital Cameras

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Hi,You shouldn't be formatting the card at all if your trying to retrieve pictures from it? What recovery programs have you tried on the card? What results have you gotten. In my experience some of the pictures should be recoverable depending o ... Fuji FinePix S6000fd Digital Camera

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Formatting on the computer or in the camera erases the card. That is not what you want. Use a separate card reader to download the pics (if they still exist) to your computer. If that's successful, then format the card in the camera (not the computer ... Fuji FinePix S6000fd Digital Camera

We took the disk out of the camera and put it in the computer nothing came up, so i put it back in the camera and know the disk says error memory lock


SD and SDHC cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it ful ... Canon PowerShot SD1000 Digital Camera

Can't get photos off camera - help please! Used to have no problem, but now have a different computer & when I plug my camera in, nothing happens. I downloaded to snapfish for awhile, but quality of pics is low on there, even if I 'buy' 'high-quality' photos - still bad. Can't find my original disk that came with the camera to download software - desperate for help - have over 2000 pics on my camera..


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Canon PowerShot S5 IS Digital Camera

I took several pictures this morning. Then I plugged the camera into the cradle and pressed USB port and connected the line from the cradle to the computer, an operation I have completed numerous times. This time nothing happened. No "import" showed up. I looked at help in iPhoto. It said to turn on the camera. I tried, but it would not turn on. I took it off the cradle and tried many times. No luck. Have I somehow accidentally locked the camera? Does it even have a lock feature?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Casio Exilim EX-S600 Digital Camera

I've switched from a PC to a Mac and have installed the G9 Solution Disk on my Mac, however it doesn't seem to be working, I can't download photos to my MacbookPro, nothing happens when I connect the camera to the computer. I have checked and the camera is in playback mode. The software looks like it installed successfully however when I try to run CameraWindow it runs forever basically doesn't start.


Use a card reader to download the pics to a folder you create on your desktop. From there, you should be able to import them to any program you wish...even iPhoto. ... Canon PowerShot G9 Digital Camera

All I need is a copy of instructions on how to operate my camera. I should not have to pay for this information. My computer would not accept the disk provided with the camera.


Vivitar.comhttp://vivitar.com/files_products/13/VC8025%20User%20Manual.pdfThomas D.Darntoothysam.com ... Vivitar ViviCam 8025 Digital Camera

Canon sd800is, 3 years old. Cannot get the computor and camer to each other. Blue light is not on. I had windows xp when I bought the camera and was able to transfere with no problem. As of this year have windows Vista. Cannot remember if I had attempted a transfere. I reinstalled the operations disk that comes with the camera. No drop box, nothing. Could it be that Vista, which has lots of quirks, is not compatible? Is there a download to fix it? Had to do that with my printer. pamann1


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

Just stupid.... i try to take a picture and it says memory full but there is nothing on my camera. No pictures and no mp3s. I try to plug the camera up to the computer it says removable disk drive (E:) needs to be formatted but when i try to format it, it says format cannot be completed. What is going on?


Hmnn\015\012do you have a memory card?\015\012\015\012that may be the problem.\015\012on my camera i can take 4 pics but i got a memory card and i can take like 400 pics.\015\012hope this helps ... Polaroid izone 550W Digital Camera

I have a samsung s860 and dont have the manual nor the installation disk and i just brought a usb cable to upload pictures from my camera but for some reason when i plug it in to my camera and then my computer nothing seems to happen so could you help me please thank you.


You can download the user manual from\012\012\012http://www.samsung.com/us/support/supportDownloadCenter.do?prd_ia_cd=N0000337&prd_mdl_cd=EC-S860ZBBA%2FAR&prd_mdl_name=SAMSUNG+S860You might want to consider NOT connecting your camer ... Samsung S860 Digital Camera

We just got a pentax camera through a points program. It is a Pentax Optio E90 Red. The serial number is 1188104. THe software included does not have a program to load the disk onto our computer so we can in turn put our pictures on our computer.It only allows to register the product, which we have done. We are operating a vista computer. Can you please tell me what I should do?


Pros never use the camera for downloading. They always use a separate card reader....then you don't need a software disc. This one is only $13 at Walmart.\012 ... Pentax Digital Cameras

I am unable to get my nikon coolpix l11 to install on my computer that has windows xp. I downloaded and installed nikon transfer 1.5.3 for windows and i installed it but nothing happens. I plug my camera into usb port on computer and nothing happens. when i choose to add hardware the computer does not find the camera. my camera has an sdisk in it. I also changed the camera to usb mode by going into the menu of the camera and choosing usb mode.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Nikon Coolpix L11 Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

Hi, I have a Pentax Optio WPI and using ACDC viewer. After upgrading on my computer at home it now says that the memory disk is not formatted and I cannot view pictures on my computer. I try to format the disk and it tries and then says it cannot. I put the card in a reader and it will not work either. The camera, disk and reader all work on my computer at work. I contacted Pentax and they said it was not a problem with the camera. Any thoughts on how to fix this on my home computer? Please hel


It is quite possible that your home system does have a virus in the system causing a registry issue. If possible use a good anti virus as the one at your work place and doa scan to trace out any malwares in the PC. You can also down load a registry c ... Pentax Optio S5i Digital Camera

Trying to intstall Digital Camera Solution disk - 35.1 for windows - get to the registration and nothing happens - can't remove the site from computer. What gives? The previous utilities seem to have been installed.


Hi,\015\012Go to start --> control panel -->add/remove program . Check in add /remove program you have this software . If you have this software then uninstall it and reinstall the software that will work .\015\012\015\012Hope ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4147 seconds