Having problems with your Nikon COOLPIX L4 Digital Camera ?

Help please I'm having difficulty with my camera; it continues to tell me my batteries are exhausted but I know they're good. I can't get the screen to come on and I also get a message about no images marked for transfer. I have my usb cable in and that is the only time my camera will come on. can you help


Answers :

With my camera I have the choice of using AA batteries (which last for about half an hour of use) but I almost always plug in a rechargeable battery pack instead. The AA batteries inside the camera are apparently disabled while the cable from the external pack is plugged in.

Each recharge is normally good for well over a hundred pictures but I've occasionally gotten the "low battery" indicator much sooner than that. It's always turned out to be caused by poor contact at one end or the other of the external power cable.

It sounds like your camera is only getting power through the USB cable (which might or might not be enough for it). I'd say, start by rechecking the batteries themselves, making sure they're connected/inserted correctly and the contacts are clean, and making sure the external power jack hasn't become crudded up in some way so that it's cutting off the internal battery.
Repair Help & Product Troubleshooting for Nikon COOLPIX L4 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Help please I'm having difficulty with my camera; it continues to tell me my batteries are exhausted but I know they're good. I can't get the screen to come on and I also get a message about no images marked for transfer. I have my usb cable in and that is the only time my camera will come on. can you help


With my camera I have the choice of using AA batteries (which last for about half an hour of use) but I almost always plug in a rechargeable battery pack instead. The AA batteries inside the camera are apparently disabled while the cable from the ext ... Nikon COOLPIX L4 Digital Camera

When I connect my camera through any USB port on my macbook, the transfer process will always begin fine, however the process will not complete. I get a "failed to transfer the image" error message as well as an inadvertent USB device ejection message. Is it the camera? cord? card?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Olympus Stylus 830 Digital Camera

Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera

I have olympus digital camera d-595 zoom. The camera is connected to the PC with a USB however when I'm transferring the image from the camera to PC I get this message "the software is unable to find an olympus digital camera connected to a USB port". What could be wrong - I have windows XP.


When the camera is connected to the computer does the camera LCD screen show a USB menu on it with the option of PC highlit? If so, then you need to press Ok on the camera to get the camera and the computer to start communicating. Once communicatio ... Olympus Digital Cameras

Hi, i am unable to transfer any pictures from my newly purchased D90. The transfer software loaded fine onto my lab top and it recognises the D90 camera as external hardware. However when i click start transfer nothing happens nor do i get any error messages. I can view the photos fine when the card is in the camera but for some reason the software cant see them when i connect via USB - can anyone help or ideas please?


I don't even bother with the camera and software. I use a card reader to download to a folder I create on my desktop. Once the pics are there I can view them from there or use a photo editing program such as Photoshop Elements to work with them. Much ... Nikon D90 Digital Camera with 18-105mm lens

Transferring pictures I am having an issue with transferring pictures from the camera. An error message has come up at the end of the transfer. It says:An error occured while saving images. Check your image capture device connection and try again.By that, it means the USB cord connection. So I have checked that. Then, I tried uninstalling the program and reinstalling. That didn't work either. I don't know what to do.Please help.Thank you.


Hi,A couple of things you can try:1. Insert the Camera's USB cord to another USB port of your PC;2. While disconnected from the PC, verify that the pictures are still inside the camera's memory;3. Reset the camera (power ... Digital Cameras

After attaching Camera, d100, to conputer HP/XP and choosing transfer images from camera, I get message " can not find USB port". What could be causing this problem. If I load the Olympus Camedia 4.0 master on another computer, it workd fine.


... Olympus Camedia Brio D-100 Digital Camera

How do I transfer the pictures taken with my Olympus μ-5010 to my HP71-340US Notebook? I connect the camera to my PC's USB port, my PC recognizes the camera, I get the schematic diagram on my PC screen showing the connection but, when I click on "Transfer " I get the message "There is no Media to Transfer". When I click on the Arrow which is on the connecting line of the diagram pointing up towards the "Transfer" box, I get "Camera Error". I bought the camera a couple of days a


You might want to consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (eit ... Digital Cameras

Problems Loading Camedia Software to new computer so I can get images off my camera. The program shows in the Add Delete Software section - but does not show up in My Programs and no icon on desktop. I am trying to use USB Reader MAUSB-10 since the USB Download Cable I usually plug into my camera itself to get images will not go in the camera. Help!


When u reload the drivers it will give u the message that this software already exists in your operating system still u want to uninstall and load new drivers.click yes, that u want to uninstall the old drivers and load new drivers.as may be the driv ... Olympus Stylus 710 Digital Camera

Transfer images My camera is broke, the error reads "Lens Error M525-22 ( 7f80). I've tried calling Best Buy where the camera was bought and I've tried calling Hewlett. Neither has been helpful. I need to know how to get my pictures on my camera off since I can not get into the menu option to transfer them to the card. Please help!


IF you have a USB cord, you can possibly plug in your camera an PC and copy all the pictures to your computer. Give it a try. ... HP Photosmart M525 Digital Camera

Before I moved, I was able to hook up my camera and transfer images with no problem, now after I moved and set my computer back up, I am unable to transfer images. I have one of those 4 USB hubs because I have several other items hooked up on my computer as well. I do not think it is back in the same port, could that be not allowing me to transfer images. The camera tries to connect but instead, it just says one moment and does not allow me to transfer. Please help me with this if you know what


Simple...use a card reader to download your pics to a folder you create on your desktop. ... Olympus FE-20 Digital Camera

Faint lines running through the lcd and out of focus pictures with drawn out images. The camara was working normally. I transferred the photos to my computer using a usb cable. I used it once after that, and the pictures were fine. Now on swithing the camera on, the LCD screen has very faint lines running through it and when you take a pic, they come out very blurred and out of focus. Please help. [email protected]


Hi, The "CCD IMAGER" of your camera is in state of malfunction, and the good thing is that SONY provide CCD IMAGER free of cost,For more information ... Sony Cyber-Shot DSC-T3 Digital Camera

Can't transfer or view images from camera to computer. All USB ports are working on computer. Double checked connections. Get following messages: 1. installing device driver software 2.searching pre-configured driver folders 3. software for this device has been successfully installed...pending.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Sony Digital Cameras

I have just returned from the Galapagos with my newly aquired VIVICAM 6200w filled with underwater shots of sharks turtles and sealions - Problem when I try to upload my pictures onto a pc I get a message saying the card needs formatting if I use a card reader and if I connect through the USB it doesn't even acknowledge that the external device exists. I really really want to transfer these images please can you help


Faulty USB cable supplied with camera - problem now resolved - thanks ... Vivitar Digital Cameras

Hello, My camera takes pix fine, but they will not transfer into my computer. The transfer via USB worked many times until now. I can hear the camera motor processing for the transfer, but nothing gets delivered. The memory card is unlocked, the transfer settings is for USB too. no success. please help. thanks, Kathy


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Nikon COOLPIX L3 Digital Camera

I can't get my pictures from my camera to my PC when I hook it up with the USB cable the box comes up for me to choose what I want to do and when I hit transfer pictures it isn't showing any of my pictures from my memory card. Recently someone added pictures to my memory card from another computer and when I hit transfer pictures they are the only ones that come up but they do not show on my camera itself and when I transferred them I deleted them when it was complete so now nothing shows up.


I will need some further clarification because it seems like your talking about a few different problems. You transferred the pictures successfully to your computer? Is it that you can't find where the pictures are located on the computer? If you de ... Norcent Technologies DC-1020 Digital Camera

Windows Vista!!! When I plug in my cord from the camera (Pentax Optio S5i) to my new laptop with Windows Vista I get a message saying it can't locate Pentax driver and this isn't supported by Pentax??? or something like that.  My camera is not that old.  Is there any way I can get my camera to work with Vista?  I can't even get it to recognize the camera when plugging it into the USB port so it's not a software issue.  HELP I do not want to have to buy a new camera!!!!


There's quite a simple fix to this. Disconnect the camera and turn it on. Press Menu and move to the the little 'tool icon' tab. Under 'USB connection', change the setting from PC to Pictbridge. Press OK. Connect your Optio to your P ... Pentax Optio S5i Digital Camera

Driver download dear sir/madam I am having SIPIX SC3300 model digital camera of 3.3 megapixel. CUrrently i dont have any software cd or driver cd nor a card reader to transfer the pictures from memory card to my laptop. I have only a USB cable but then i need the supporting software to help transfer the pictures from camera to direct laptop. Can u please help me how i can get a software download from you.


You can contact me directly at mewms_14904 at verizon dot net.Or you can download from driverguide dot com. it is free to join and download is 9.2 mb. ... SiPix SC-3300 Digital Camera

I have installed the software on my computer for my new Canon Power Shot A11001S digital camera. However, when I click on transfer untransfered images the images do not transfer and instead I get a message that reads: Canon Utilities Camera Window has encountered a problem and needs to close. What should I do?


Hi,\015\012\015\012You can download pictures from your camera to your computer by using a memory card reader (You can use your computer's built-in memory card reader, if it has one, or you can purchase an external memory card reader as sh ... Digital Cameras

Hi I have a Canon A460 which has worked fine. My problem is with the transfer of images to the computer. I get either a message saying camera not found or I get a message saying camera detected with a box underneath where I would expect to see zoombrowser or another software to launch the action. The box is empty so I can't select anything. This has only just happened recently. Probably around the time I installed a Canon MP270 printer/scanner (which is a pig to use). Thanks Pat


Well, obviously your registry has changed and your camera is no longer recognized. No problem....just get a card reader and use it in place of your camera. That's what the pros do. ... Canon PowerShot A460 Digital Camera

PowerShot A530 It takes digital images and transfers them via the memory card to the computer. The images all remain on the card and the computer. The camera loses some of the images in the middle of the set giving the message: Imcompatible JPEG format. So, on reviewing my pictures, there may be two good images, then five or so clicks over this message (each click representing a 'lost' image) then the later images appear. Help!


Canon S51S\015\012Shows JPeg on my screen\015\012Also the screen is blank now too. (It will show playback pictures)\015\012Can You help\015\012ABDM ... Digital Cameras

Photo transfer I have a Sony Vios running Vista. I have a casio exlim 550 camera with an SD chip. When I put the chip with photos into the SD reader slot I get a message say Photo Gallery cannot read the photos in their format. When I put the SD chip back into the camera and the camera into its charging/transfer base plugged into a USB slot the photos transfer just fine. I need the pics to transfer through the SD slot on the front of the Vios. Anyone have a fix to this? Thanks. Dave


Change the pic format options in the camera to read *.jpeg intead of *.raw\015\012\015\012if they are in jpeg maybe the computer dosn't understand the way the camera formated the sd card mine dose the same thing when i try to tranfer imag ... Digital Cameras

Our fuji camera gets a communication problem message when we connect the usb cable to the camera and PC the correct software is on the PC I have checked the USB set up on the camera and it is fine it says searching for USB then says communication problem can anyone help please ?


Try a new cable ... Fuji FinePix A700 Digital Camera

Hi I am soooo annoyed with my camera, I want to download images from my Olympus FE-120 to my pc, but I cant get my camera to go into 'pc' mode, so I get an error message saying the Olympus software cant find my camera. It did it ok yesterday!!! I know from looking that people seem to say get a card, but I need to do this urgently. Any help very much appreciated.


Sounds like you've been taking pictures with no card in the camera so all of your pics are on the camera's internal memory. This is the cause of so many problems that I cannot begin to tell you some of the stories I've heard. You need to get a memory ... Olympus FE-120 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5965 seconds