Having problems with your Nikon Coolpix S210 Digital Camera ?

Connecting the camera to the computer to transfer pictures, it says the device is busy and unable to connect. What gives?


Answers :

Start using a card reader.
Repair Help & Product Troubleshooting for Nikon Coolpix S210 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Connecting the camera to the computer to transfer pictures, it says the device is busy and unable to connect. What gives?


Start using a card reader. ... Nikon Coolpix S210 Digital Camera

My pictures won't download!! I never had this problem before, so I don't know whats going on? I plug in the usb cord, and the camera turns on and everything, but the thing will not pop up where it usually says press ok to transfer pictures. I redownloaded my software to my computer but when I try to transfer the images from my camera to my computer it says THE SOFTWARE IS UNABLE TO FIND THE OLYMPUS DIGITAL CAMERA CONNECTED TO A USB PORT ON YOUR COMPUTER! HEEEELLP!!


Some comp seem to have problems reading from the olympus cameras. if you have a card reader take the card out and put into that. if not you can get one cheap and they simple to use ... Olympus FE-340 Digital Camera

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.


I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

When attempting to download photos from my CX7310 camera to my computer the computer screen gives the impression that the photos are being downloaded but then I receive a message that the pictures have not been transferred and the pictures will not be removed from the device. I have noticed a little rust on the outside of the USB cable plug which fits into the comuter. Could this rust be the problem with being unable to download photos to my computer?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EesyShare CX7310 Digital Camera

Transfers I have a hp 733 photosmart 3.2 MP with a 3x optical zoom. I have pictures on the camera but would like to transfer them to my computer. I lost the book (yeah I know!). When I go into the my computer hp photosmart is there, I click on that and there is a box that says get pictures from camera. When I click on that nothing happens. The camera says "connected to computer". Brenda K. Nummer [email protected]


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... HP Photosmart 735 Digital Camera

Picture problem I have a Canon Powershot A95. My computer says "Camera Connected" but when I try to load pictures I get a message back saying "The computer cannot detect the scanner or camera. Please make sure the device is turned on and is properly connected to computer"


Is your computer connected to scanner?? if so remove the scanner and deactivate the scanner software in computer then the problem will not come. ... Canon PowerShot A95 Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.


This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras

When I connect my camera to my PC, the software for transferring pictures from camera to computer used to open up immediately. However, now it doesn't. In fact, the computer doesn't give any sign of recognizing the camera, despite the camera being connected to the computer's USB port with the power on.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon IXUS 80 IS Digital Camera

I am unable to transfer pictures from my camera to my computer. when i connect the camer and computer to the USB port and turn the camera on nothing happens. In the past a window would pop up and you could transfer pictures. Now no window and the only changes I have made was I downloaded firefox brouser.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon Powershot A1000IS Digital Camera

I just recently got a new computer, I downloaded the Kodak EasyShare program, now I'm trying to upload my pictures from my camera to the computer,and it says 'Installing Device' then it says 'Device was not successfully installed'. It gives me no instruction about how to get it to Install successfully or why it wouldn't install. I have a Kodak EasyShare C813 camera. Please help! Thanks!


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Kodak Easyshare C813 Digital Camera

Trying to move picutres from Olympus FE-190 to a new computer that has Mircosoft Vista for OS and the program gives the error: "The software is unable to find an Olympus digital camera connected to a USB port on your computer. Would you like to search again?" Camera is connected but the software seems unable to find it. I'm also able to use a different program to move pictures, but I want to use the Olympus program.


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Digital Cameras

I use pl70. i am having problem downloading my pictures. when i connect my camera to my computer i do not see my pictures, i have even tried inserting the memory card directly to my computer and i still cannot view my pictures. but with the memory card in my camera i can view my pictures. i have tried copying the pictures from the phone memory to the card and i get error message saying no files in my device.


1) Using new memory card. first connecting memory card to computer and format. and insert memory card to camera. making single shot. then connecting computer you see picture. Memory card formating in camera may be not working computer or other ... Samsung PL 70 SL720 Digital Camera

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss


Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

Before I moved, I was able to hook up my camera and transfer images with no problem, now after I moved and set my computer back up, I am unable to transfer images. I have one of those 4 USB hubs because I have several other items hooked up on my computer as well. I do not think it is back in the same port, could that be not allowing me to transfer images. The camera tries to connect but instead, it just says one moment and does not allow me to transfer. Please help me with this if you know what


Simple...use a card reader to download your pics to a folder you create on your desktop. ... Olympus FE-20 Digital Camera

My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s


Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras

When I connect my camera to my computer, it appears to be empty. I have over 1000 photos on it which show on the camera screen, but the computer sees none. I have even tried downloading the drivers and 'Nikon transfer' package from the disk that came with the box. I am using windows xp. Why does my computer not read the camera? When I open the S52 folder in my computer, there are no files. When I then press 'get pictures from camera' it says that the camera is in use. What am I doing wrong?!


First of all, why on earth would you keep 1000 pics on the memory card? They are not meant for storage....they can be easily corrupted and you could lose your pics. You need to get a card reader and use it to download your pics. Then, format the card ... Nikon COOLPIX S52 Digital Camera

Transferring pictures I am having an issue with transferring pictures from the camera. An error message has come up at the end of the transfer. It says:An error occured while saving images. Check your image capture device connection and try again.By that, it means the USB cord connection. So I have checked that. Then, I tried uninstalling the program and reinstalling. That didn't work either. I don't know what to do.Please help.Thank you.


Hi,A couple of things you can try:1. Insert the Camera's USB cord to another USB port of your PC;2. While disconnected from the PC, verify that the pictures are still inside the camera's memory;3. Reset the camera (power ... Digital Cameras

I am trying to download my pictures but the software does not recognize the camera or the disk within the camera. I can see (play) the pictures on the camera, hence the disk does not appear faulty. I connect the camera to the computer using a USB lead to download the pictures and click on EOS utility software. The battery is fully charged, the camera flashes saying it is 'busy' but there is no flashing red light to signify the photos are downloading. After a few minutes the camera goes dead (the


Use a card reader to download your pics to a folder you create on your desktop. ... Canon Rebel XT / EOS 350D Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

I am unable to transfer pictures from my digital camera casio exilim ex-z700 to my laptop. Firstly it says, the USB is not recognised as it has malfunctioned and the camera displays connection problems. I have been able to transfer pictures with ease before. I am clueless now. Please help!


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time


Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera

I can not transfer my pictures from the M1033 easy share kodak to my computer. Please help!! I am connecting the usb cable to the camera and computer and turning the camera on - nothing happens! When I go the synchronize/manager help, the camera shows up, but I am unable to click on the icon for the synchronize and manage. Getting so frustrated with camera, considering returning it!


I typically recommend using a card reader- it's a constant and generally works better and it keep the wear and tear down on the camera/battery. I'd recommend you try using a reader and see if it's working correctly. If not, look at the USB port and a ... Kodak EasyShare M1033 Digital Camera

Transfering pictures I dont have a memory card yet, so my pictures are saved to the camera's memory. I use the plug to transfer my pictures to my computer. I plug in the camera, then turn it on. The lense usually comes out and something pops up on my screen of my computer that asks me if i want to transfer my pictures to a folder on my computer, but now the lense doesnt go out when i turn it on while it is plugged in...and on my computer it says that the pictures are being transfered and then it


You must start the Explorer (windows key + e key).\015\012You should see your camera on the left.\015\012Right click on it.\015\012Click on properties.\015\012Click on Test Camera.\015\012Click on Set time (in order to s ... Nikon COOLPIX P4 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6815 seconds