Having problems with your Nikon Coolpix S4000 Digital Camera ?

Nikon transfer software was successfully installed. however windows vista is asking to install device driver software when i connected nicon s4000 to a computer. what's the problem?


Answers :

Having gone over five months without a response, I assume my suggestion to use a card reader eliminated the need for a driver.
Repair Help & Product Troubleshooting for Nikon Coolpix S4000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nikon transfer software was successfully installed. however windows vista is asking to install device driver software when i connected nicon s4000 to a computer. what's the problem?


Having gone over five months without a response, I assume my suggestion to use a card reader eliminated the need for a driver. ... Nikon Coolpix S4000 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

Despite installing software on computer.when i connect the camera with the usb cable it comes up as unknown device. have tried reinstalling driver but no joy. have installed camera previously on another computer with no problems to start with then started to not recognise device on first computer. any ideas?


The pros never use the camera....they always use a separate card reader. You should too. ... Samsung Digimax V800 Digital Camera

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss


Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

My new Insignia Digital Photo Keychain won't load. I bought 2 of them, and both of them when I connect them they say ''connecting'' on the blue screen, but they never come up on my computer. My device driver says there is an error and it cannot upload the device driver. I don't know what to do to bring up this software if my computer won't recognize it when I connect it.


... Digital Cameras

Can't transfer or view images from camera to computer. All USB ports are working on computer. Double checked connections. Get following messages: 1. installing device driver software 2.searching pre-configured driver folders 3. software for this device has been successfully installed...pending.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Sony Digital Cameras

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.


I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

I can transfer images from my nikon d700 to my desktop. The Nikon software have been installed in my computer. Every time I switch the camera on, to start transfer. The computer system says installed "device driver" . Whats device driver and where can I install it from? thank you....syed


Your computer is looking for a mass storage device. Go through the camera menu system and make sure "USB Connection" is set to Mass Storeage, then Windows will automatically install the drivers. ... Nikon D700 Digital Camera

Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s


Load any software first before installing hardware ... Pentax Optio 60 Digital Camera

My pictures won't download!! I never had this problem before, so I don't know whats going on? I plug in the usb cord, and the camera turns on and everything, but the thing will not pop up where it usually says press ok to transfer pictures. I redownloaded my software to my computer but when I try to transfer the images from my camera to my computer it says THE SOFTWARE IS UNABLE TO FIND THE OLYMPUS DIGITAL CAMERA CONNECTED TO A USB PORT ON YOUR COMPUTER! HEEEELLP!!


Some comp seem to have problems reading from the olympus cameras. if you have a card reader take the card out and put into that. if not you can get one cheap and they simple to use ... Olympus FE-340 Digital Camera

I have a canon powershot SD800 IS. When I connect to my computer (windows vista), the icon is not coming up for my to press to download my pictures. I went to the device manager and saw that there is a yellow exclamation mark beside my camera. I tried updating the driver software and it tells me that my device is already uptodate. However, the computer still cannot read the camera and I cannot download my pictures. Please help.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

When i plug it into the computer there is a message that say that windows needs to install driver software for unknown device. and second problem is that it will only switch on when it is pluged into a computer, making it imposible to carry around


The second problem is that your battery is dead and you need to replace it.\012 \012the first problem is that you need to go to the manufacture ... Digital Cameras

I have a EX-Z3 (product no. 2031914A) camera. I recently upgraded my PC which runs Microsoft Vista - previously I ran Windows Office 2000 Professional and with Picasa 2 had no problems. However, my new computer sappears not to recognise the Casio camera as an attached device...I have loaded and reloaded the software and checked and double checked connections and the USB cable. What could be the problem and is there a simple solution (for a non-technical person)?? Many thanks. Roger Neilson r.nei


Uninstall the software.reinstall the software with camera not connected to usb.this often solves the problem. ... Digital Cameras

Same! i am having the same problem... my computer had a virus and the place i took it must have deleted the nikon software and now my computer will no register the camera. if i go the device manager i can see S210 with a yellow exclamation next to it and it is unable to restore back to its orginally driver settings


If all you want to do is download the pictures you take, use a separate card reader and download them to a folder you create on your desktop. From there, you can do anything you want with them. ... Nikon Coolpix S210 Digital Camera

I have Canon Rebel XTI. When I connected it to a USB port, the AutoPlay in Windows Vista came up and asked what I wanted to do with the pictures. I always selected copy to a specific folder. Now, however, Vista tries to load a the drivers for the Canon and cannot find them. It does not look at the camera as a simple storage device now, but this is what I want. I went through various fixes, including and installing the latest drivers and software, but to no avail. Some sites suggested


Have you tried to open the files thru windows explorer? Try to locate the drive letter associated with the Rebel XTI. Open that drive by double clicking it and it will show you the file contents. Browse thru the folders inside until you find the p ... Digital Cameras

I have a konica Monota model DG-5D camera and the USB port is not recognized when I connect it to my PC. I am attempting to down load my pictures to computer and the massage reported from the PC is devices is not recognized. PC drivers are up to date. I need your help with trouble shooting problem.


I could not find a Konica Minolta Model DG-5D camera listed on the support web pages.\015\012\015\012I did find a "DYNAX5D/Maxxum5D" that had ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

I have loaded the software updated the driver and when I connect the camera the computer still does not recognise the device. How can I overcome this?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Fuji FinePix S1000FD Digital Camera

It will not connect to my computer? -it says device driver software was not successfully installed


You will need to re download the drivers for it to recognize the camera. Go to:\015\012\015\012 ... Kodak EasyShare V1003 Digital Camera

When connecting the Kodak C913 to the computer, the USB hub will not receive information from the Kodak. The driver is failing for some reason, giving the error message (during reinstallation of the drive): An error occured during the installtion of the device. A service installation section in this INF is invalid. I have downloaded the software off the site and installed off my disc, however nothing seems to work.


Possible solutions:\015\012Remember you need to turn the camera on when transferring.\015\012Try a different USB outlet\015\012Try a different cable\015\012Try a different computer.\015\012\015\012If all fails plea ... Kodak EasyShare C913 Digital Camera

Connection Problem I hope I'm posting this in the right place. I recently bought a Kodak DX4900 & installed the software onto my computer. After taking some photos, I tried transferring the photos to my computer, but it appears that my computer just isn't seeing the camera. I've uninstalled the software & re-installed it, defragged my computer & run a scandisk & the problem still hasn't been fixed. I'm not particularly computer literate at the best of times, and am stuck. I have a new camera tha


I had the same problem with my DX4900. After reinstalling software, etc it finally turned out that the cable that connects the camera to the computer was bad. Kodak has specs for the DX4900 on the ... Kodak EasyShare DX4900 Zoom Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

I seem to be having problems connecting my Fujifilm Finepix J210 with my computer. When the hardware wizard auto intalls the drivers it shows a message that there may be problems using the hardware. We have tried updating/changing the driver which makes no difference and we know that there is no issue with the camera as it works on another computer. We have also tried other cameras/memory cards on THIS computer and they work fine.


... Digital Cameras

Hello, I have recently purchased an Olympus Digital Camera u-5010 and the photos I have taken all seem to be out of focus. Also there was no CD enclosed for the software and my camera refuses to talk to my computer. I went back to Myer where I purchased the camera and they suggested I download driver software. I have tried to do this but just seem to end up with companies wanting to me to pay to update my computer by deleting obsolete drivers. If you could help with these two problems I


Hi Helen, \015\012\015\012I too have recently purchased the same camera and mine isnt 'talking' to my PC either. First I was told that the software was internal and upon taking it back I am now told to download the driver - of which I can ... Olympus FE-280 Digital Camera

I have a Canon A700 powershot. For some reason the camera is not automatically downloading the photos to my computer. I have reinstalled the software to the computer but when I connect the camera to the computer the blue light on the camera denoting download capability no longer comes on and the computer whilst sound prompting the connection does not appear to be recognising/connecting the camera to the computer. This is a recent problem. Is it likely to be a fault with the camera, computer


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A700 Digital Camera

Aries driver Small cheap digital camera purchased for 20.00 at Wallgreeens. Lost instructions. Need to locate driver program, so that I may download pix. Aries camera, very small( 2"x3") black, three buttons on back, one on top. No model #'s visible. long shot, but any ideas? I have the same problem with the driver trying to install when connecting the USB to computer with small Aries camera we purchased at Walgreens for 20.00. Computer can not find drivers. We went back to Walgreens for our 2


... Veo Capture 210S Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4129 seconds