Having problems with your Nikon Coolpix S4 Digital Camera ?

My camera's screen went blank just recently. It turns on and the screen icons come on but it seems there is no connectivity between the lens and screen.

Answers :


The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to Nikon service centre. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost.

Thank you
Repair Help & Product Troubleshooting for Nikon Coolpix S4 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera's screen went blank just recently. It turns on and the screen icons come on but it seems there is no connectivity between the lens and screen.

Hi, ... Nikon Coolpix S4 Digital Camera

Not focusing I'm not sure what happened, nothing seems to be obstructing and to my extent of knowledge nothing has happened to my camera. However when I turn it on the lens comes out once, goes back in, and comes out again. Then the screen is blank, shows no picture until i push the play button, or until I change what picture setting it is on. Once the screen shows picture it will not focus anything. Any help here?

Do you hear any unusual friction noise while the lens assembly projects out.. if so then the traction assembly of your zoom barrel has developed mechanical obstruction, in which case it has to be serviced. Take it to the service centre and the proble ... Olympus FE-230 Digital Camera

When I switch the camera on the screen stays blank even though the lens comes out, it eventually goes off (with the lens still out after about 40 seconds). I can get the camera to work if I press the green "view" key and then, after the picture appears, press the red camera icon and it will go into auto shoot mode. Happens every time now. I can't take it in under warranty as it was a present and I don't have the receipt unfortunately.

Replace the batteries then check ... Olympus FE-170 Digital Camera

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate

Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

Please help! I dropped my camera this morning and now it wont work. The lens comes out and it seems as if its fine, but there is no picture displaying, its just a blank white screen. Oh no have I broken it?

May be its possible or any other problem comes in ur lense there should be a hardware problem u first go to the service station and get ur camera checked by responsible person. ... Olympus Stylus 760 Digital Camera

Lens issue A black screen comes up with the word access. The lens seems like it is trying to fix itself but is jammed. After a few tries the screen says: Turn the power off and on again. I have done that and tried removing the battery for a period of time and recharging it but nothing seems to have an effect. Thank you in advance for your help.

This is either a faulty lens mechanism caused by dirt ingress or damage, thus not able to complete the process- Contact Sony for repair erstimate. ... Sony Cyber-shot DSC-W50 Digital Camera

Hi, I purchased a replacement LCD screen for my SD3500 from Rongstar DigitalInc. Since I've learned they do not have a good reputation and to make matters worse the LCD screen will not function properly. It seems to light a bit and the "touch" seems to cause camera to beep as if the touch screen were working, but no images or "scene to take" is viualized ion the screen. As I said only a faint lighting ( appears to be black as if no light coming off it) . Help! I am sure it is connected corr

I had a similar problem with a Canon camcorder. I replaced it with a new LCD screen from Rongstar Digital, and it works! Saved a $350 camera for $20! However, installing the new LCD was very difficult, and is not meant to be done by amateurs. Yo ... Canon PowerShot SD3500 IS / IXUS 210 Digital Camera

Screen shows icons but nothing else in any mode. Also will not review or download pictures. Seems to function otherwise (powers up with blue canon screen, lens extends, zoom works, etc then goes to black screen with icons).

... Canon PowerShot A510 Digital Camera

Blank screen When I turn the camera on, the screen is blank..the lens is open though. And when I hit "menu" the screen comes on for a second...and when I review pictures it is fine

I actually had this same exact problem. I just got off the phone with the repair service. For me it was as simple as hitting the "disp" or display button on the bottom circular area on the back of the camera. It turns the display back off. I felt so ... Sony Cyber-shot DSC-W80 Digital Camera

Camera - Fujifilm Finepix A500. The screen goes blank when taking a picture. It does not take the picture and although the screen goes blank and only comes on again when the power button is pushed the lens remains out. It does retract if switching the camera off. There are new batteries in the camera and a different set has also been tried.

What worked for me with the same problem is to reformat your internal memory and/or picture card. First, download all your pictures saved from your camera to your computer, since the reformat will wipe them off the camera memory. Next, follow the ins ... Fuji FinePix A500 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!

Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Navman gps s45 not charging ...attached charge lead to dash in car after 30mins not charging. Only stays on when lead connected tried to switch on with out lead and gps screen fades off and occassion comes on now and then. Till I connect lead to dash again screen seems to stay on...Reply Please... Thks

... Digital Cameras

PowerShot A70 My camera lens won't seem to open up it comes on and then just beeps, E18 comes up in the bottom left hand corner of the screen. I can't seem to view any of my pictures on the memory card either. I tried going to trouble shooting and can't find any information on what the E18 means or how to fix it.

This comes up when the lens sticks. Try removing the colar around the lens, then turn the camera on/off and give it a "little help" to open or close, it's probably just a little stuck ... Canon PowerShot A70 Digital Camera

White screen. Hi, its a month old, panasonic tz3. i dropped it last week. Now it just shows a blank white screen on the Lcd, and even the snaps clicked are blank white. Though the earlier snaps can still be viewed on the LCD. the lens assembly seems to be fine, i.e its moving alright when i try to zoom it.

You may want to ask a guy in South Carolina that has all the used parts for your TZ3. I think his email is [email protected] ... Panasonic Lumix DMC-TZ3 Digital Camera

My L730 was knocked off the table and seems to have now jammed, when I turn it on it makes 3 loud beeps then the screen goes blank. The power light stays on but it doesn't seem to be attempting to do anything. The lens is still out. I've tried removing the battery and waiting before replacing it then turning it back on and I've also tried gently manually moving the lens but the problem persists. Very Infuriating as I recommended this camera to others, 2 of which have bought one since !! Can anyb

Hello.Your brand of camera has very little to do with your problem. This has to be one of the top digital camera problems of all time. There is a very good solution here on fixya click the link below.And please give the author thumbs up,he's explaine ... Samsung Digimax L730 Digital Camera

Sony DSC-W100 I own a sony dsc w100 and it has been taking great photos. Unfortunatly I switched it on today and it no longer seems to be a ble to focus. I have cleaned the lens and the little circular piece of glass (think this bit measures distance for focus) but my photos are still blurred. The camera seems to permenantly have a little icon saying 'saf' in the bottom left corner of the screen. I wonder if this icon is the key to the problem and what it means? Is it a safe mode and if so how d

FINALLY FIXED!\015\012\015\012I use my dsc w100 for work all day every day and it started doing the same thing, after trying everything I could find, a few light smacks to the bottom and presto, works like new!! ... Sony Cyber-shot DSC-W100 Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Brand new camera-switched it on- has a blank screen-its fully charged, its just got a lit blank screen and zoom lens only comes out slightly.,-im sending it back to where i bought it from but im concerned whether there is something i havent done to make it work. help. thanks so much

No...you have a brand new defective camera. Glad you're returning it. ... Digital Cameras

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

WEIRDEST PROBLEM When the camera is turned on, hangs up the lens comes out and the screen is blank. When the green button is pressed, the lens is "in" and the last picture taken shows on the screen. I can scroll to all the pictures, but, if you try to exit the camera turns off. Please help me!

\015\012Your battery may be low on power.\015\012Buy new batteries. ... Olympus FE-170 Digital Camera

6 month old Canon Power shot S5IS flip out LCD screen will not keep connection, the screen goes blank and can not be used. I primarily use this feature to take my shots. When I opened the screen to take my shot I notice I had to move it around and the screen came on. Now it will not come on no matter how I move the screen, up, down, right left, twisted into the body. It does not work. Looking at the body of my camera the screen is not loose, nothing looks abnormal from the outward appearan

Canon will fix this under warranty. Call 1-800-OK-CANON. ... Digital Cameras

On my Fuji s2000hd I have a zoom error, the screen is black and I can't take pictures. The lens will not zoom out. I believe that my husband put the lens cap back on before the lens had gone all the way in when he turned it off but I am not positive that is the problem. The lens seem centered and there doesn't appear to be anything blocking it from coming out. Is there a way to fix this?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S2000hd Digital Camera

Lens broken my camera fell off a table and now the lens is screwed up. when i turn it on it is just a black screen. but if i press firmly on the right side of the lens, the picture blurs, fuzzes, and then comes into focus, once i take my finger off it goes black. so i can take pictures, but only with my finger on the lens. it seems like this is fixable. what can i do?

Not easily fixed. Sounds like you stripped the feeds for the lense, and it messed up the contacts. Try sending it to Kodak for repair, or taking it to a camera repair place. These devices are sensitive electronics, so you won't be able to fix it at h ... Kodak EasyShare One Digital Camera

My screen is blank when I switch the camera on, although the lens seems to open normally - playback is fine. Battery is charged. This happens in all modes.

... Panasonic Lumix DMC-FS5 Digital Camera

I plugged my camera in to a portable printer for cameras and ever since it hasnt worked, It first said lens error and the lens would extend half way, But now the lens extends fully but the screen is blank, Nothing comes up if it plugged into a usb slot either, Please help

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3059 seconds