Having problems with your Nikon D200 Body Only Digital Camera ?

Continuous High (CH) Shutter Mode on Getting Two Frames

\015 Used high-speed burst mode (CH) just last week. Don't know what setting I've changed. Now when I click the shutter, it only shoots two frames and stops. What simple thing am I missing? Thansk.\015

Answers :

I have just the opposite problem I can't get more then 2 shots per shutter click in any mode in my D 200?
Repair Help & Product Troubleshooting for Nikon D200 Body Only Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Continuous High (CH) Shutter Mode on Getting Two Frames

I have just the opposite problem I can't get more then 2 shots per shutter click in any mode in my D 200? ... Nikon D200 Body Only Digital Camera

I have a Nikon D200 I have been using in high school football stadiums shooting football, using a Nikkor 2.8 180 ED lens. I have noticed while shooting there isan orange horizontal strip that appears during continuous shutter. The first two frames will be correct exposures, but the third through fifth frames have this 1/3 fram strip of orange first on the third exposure and in the middle of the fourth and on the bottom of the fifth. I have no idea what is causing this. I have checked all m

Its the problem of the ccd lens.and the inter nal settings.take it to the repair center to make it proper.as this type of problems are common and r repairable.so it will be repaired.\015\012for any other further queries feel free to ask.\ ... Nikon Digital Cameras

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap

Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

The built-in flash on my nikon d70s does not always fire. sometimes this goes on for quite a few frames before it functions again. and often when it does decide to "wake up" it fires way too hot -- even in TTL. I'm not using the continuous shooting mode, so what could be the problem? shutter count near 15k clicks

Forced flash will not work in auto. If you are not using 'P' mode you should. In 'P' mode it will flash everytime.\015\012\015\012That said, the many flashes does not sound right. I would call Nikon's tech help line at 1-800-nikonux. ... Nikon D70s Digital Camera

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.

In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

Shutter The other night when I was taking pictures, my shutter seemed to get stuck half way through opening everytime I shifted into picture mode, and I'd push it open with my finger and it was fine, but now, I cannot get them to open at all in any mode. I can't use my camera at all!

Hey laura0157,\015\012 I would first try resetting the camera to the default settings, and directions on how to do this are on page 22 of your user manual. I have included a link to a PDF download of your camera man ... Panasonic Lumix DMC-FX3 Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

I filmed 12 hours of footage (6 tapes) over two days using two different Canon XHA1 cameras in HD mode using Sony HD tapes. 4 of the tapes are fine but two of the tapes are not showing a timecode consistently and I cannot get them to read in the camera or a Sony playback deck. I also cannot get Final Cut Pro to read any footage off the tapes. This is a desperate situation as the two tapes in question have footage from an actual wedding ceremony on them. It is strange because they were used at t

There is no way that the cameras to be strangely set or something like that .. specially in the same time with only 2 of the cassettes ..so the only explanation will be either that someone messed around with them like a sick joke..or the tapes that d ... Digital Cameras

Slicking speed in continuous shots have a much decreased speed even on high shutter speed....

... Canon Rebel XS / Eos 1000D Digital Camera with EF-S 18-55mm f& EF 75-300mm f Lens


... FUJIFILM FinePix AV100 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t

My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would

Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

Canon EOS rebel XS is not releasing shutter in AF mode of the lense. If I make the MF mode in the Lense, it releases the shutter. I have updated the firmware to 1.06 still I am getting the problem. I have also set the focus locking in the camera, but no result. Is it a problem with Lenses or Flash Memory or camera? Pls. help with the solution.

... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

D90 flash I just bought a new Nikon D90 and I was on a shoot and the built in flash popped up (in bright sun in manual mode) and I cannot get it to stay down. the camera will work but only to 200 shutter speed. if I hold the flash down then it will work at all shutter speeds. Any Ideas on how to get the flash to go down?

I have just fixed this problem on my D90. Go to http://dieselpic.wordpress.com/2010/07/14/d90-flash-wont-stay-down-how-to-fix/ to see how I did it. ... Nikon D90 Digital Camera with 18-105mm lens

My IR-500 will not focus whether I lock focus or not. When I half depress the shutter & get the green light I press the shutter & then get a severe motion blur. This occurs in all scene modes. It does not happen when using flash. Please advise -jim

Your shutter is staying open too long. Do you have it set on "bulb" or "time exposure" or something like that? It doesn't happen on flash pics because the flash is so short, it freezes the action. ... Olympus i:robe IR-500 Digital Camera

NIKON D1X Hi I just bought a D1X nikon, in the full manual mode when I change the shutter speed, I can hear no change in the sound it makes when going from 125    to  16K.  However the image gets darker  as I increase the shutter speed.   Is it electronic shutter? Hence no physical increase in shutter speed? Thanks for help.

The shutter is a copal shutter and it does change . Try 125th speed haer the sound and then change to 1/15th . Also you can tell on your histragram inthe camera or the image on your display . ... Nikon D70s Digital Camera

Canon g12 problemsI recently recharged the battery. I have lost my landscape mode on setting scn, it has been replace with smart shutter mode. How can I get my landscape mode back.

You may need to adjust the scene mode by turning the knob to scn you may check out the manual through this link http://chriszaluski.com/com220/docs/Canon%20G12%20Handout.pdf turn to page 3 ... Cannon Digital Cameras

The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."

Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera

Continuous shooting I'm new to this so bare with me. I just got my Nikon D60 and I want to shoot pictures in continuous mode. I set it on manual, go into the menu and change it to continuous. I rotate the dial so it changes the shutter speed but when I take pictures it's just a black screen. As a matter of fact any time I try to take a picture in M it's just black. I'm hoping that there is just a setting I need to change and there's not something wrong with my camera. Thanks.

Hey man. Im not sure how new you are but basically i think your problem is you need to decrease the shutter speed to around 1/200-1/250 of a second and increase the apeture to around f10/12 and see if that works. If your operating at a high shutter s ... Nikon D60 Digital Camera with 18-55mm lens

I am getting a prolonged grinding noise when i turn my panasonic dmc-tz1 on this varies in time length as i switch on and off also seem to be getting a lot of blur that i didnt have before as i only get the noise when dial is in taking photo mode and not playback i assume its something to do with focus / shutter any help appreciated .

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ1 Digital Camera

I am in the "s" mode for shutter speed priority and i cant change the shutter speed i use the scroll to get the arrow above the shutter speed on the view finder and from then i cant figure out how to change the speed i want to take photos of water dripping help please.

Are you pressing the jog dial to save the setting? Here's what your book says:\012\012\012Turn the Mode dial to P, A, S, M, or C.The mode options are displayed. \012Use the jog ... Kodak EasyShare DX7630 Digital Camera

In the RAW+JPEG mode I just get two jpeg images

... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Flash Problem Rebel XT flash icon shows next to "busy" in the view finder when I press the shutter button. If I attempt to take the photo the flash does not work. If I continue to hold the shutter half way down, then release it I get Err 99. I am using genuine Canon lens' and have tried all three. I also connected my 420EX external flash and it also does not flash. Any suggestions are deeply appreciated. Thanks

Hey tombston,\015\012 An error code of 99 is Canons general error code for this camera, and they suggest cleaning the lens contacts and/or removing the battery and then reinserting it. If this doesn’t work I wou ... Canon Rebel XT / EOS 350D Digital Camera

I just bought a tl105 samsung camera. When in movie mode, I can't always get it to start recording. I get an audible sound, but sometimes nothing happens when I push the shutter button, and sometimes it starts recording.

If you've just bought it, take it back to the vendor and request they demonstrate it to your satisfaction.If they can't because there's a fault, request a replacement or refund under warranty. ... Samsung TL 105 Digital Camera

I take a few shots and get the Error message 30 on my 50D- Always need to shut it off and then back on. Since I did soe net surfing, and since the camera makes a clear noise whn it goes into error mode, I am thinking it is surely a shutter problem. Anyone there confirm that it is a shutter problem? Note I was using a Sigma Lens at the time, so the little boys at my local shop are saying it is "not" the camera...of course it is still in warranty. I am looking for any HELP or ADVICE! Tony C

HelloThe problem is that the lens has become stuck in the barrel\015\012 after dropping it. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.Use\01 ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2819 seconds