Having problems with your Nikon D200 Digital Camera with 18-70mm Lens ?

Main command dial not working

\015 I bought this camera and all the person could tell me is the main command dial was not working. How much would that cost to get fixed?\015

Answers :

Repair Help & Product Troubleshooting for Nikon D200 Digital Camera with 18-70mm Lens

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

D7000 main command dial doesn't seem to be working. Many functions say to press a button nd then use main command dial for the options, but it doesn't scroll through any when I turn the dial. For example, for auto focus modes. Any ideas?!


... Nikon D7000 Digital Camera

Main command dial not working


... Nikon D200 Digital Camera with 18-70mm Lens

I have a Nikon D3 and the main command dial will not change shutter speed. It will change info in the rear control panel but not the shutter speed in the top panel.


... Nikon D3 Digital Camera

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Command Dial not working


Have you solved your D40 problem yet? If not, give more details for further assis.tance ... Nikon D40x Digital Camera

Wont work 20 is flashing in the lcd and mode but doesnt affect it? i have the d60 but it wont turn off, i tried swsitching it off **** it doesent work, it doesent take pics either i rotate the command dial and nothing happens,, whats worng help me , 5 months old


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Nikon D60 Digital Camera with 18-55mm + 55-200mm lens

Canon 450D Main dial not working


Spillage or impact damage that breaks lands in the flexible top cover circuit can cause this problem, as can sand which wears away traces on the switch contacts on the circuit itself. Impact can also cause the flex from the top cover topull loose or ... Canon EOS 450D Digital Camera

FinePix S9500 Command dial doesn't work - Digital Cameras


Hi there,try to remove the unit battery for a while. this can be a malfunction on the unit system that needed to be reset.let me know ... Digital Cameras

Main dial on canon 30D not working


... Canon Digital Cameras

Command dial on my s9500 doesn't work. Does anybody has the service manual or knows how much does the repair cost


Contact fuji spares department, I am hoping to get mine repaired free as it is a design fault . There is a small plastic shaft from mthe rear of the dial that breaks with normal use .... tel No on www.cameras.co.uk ... Fuji FinePix S9500 Zoom Digital Camera

Command Dial not working


I have had 2 cameras which developed a fault with the selector dial for exposure compensation & other parameters. Problem was a faulty selector switch on 1st camera. I was lucky to have this repaired under guarantee. Fuji replaced the top end of ... Fuji FinePix S9000 Zoom Digital Camera

The main dial on my Canon Rebel T1i isn't working. This prevents me from using auto exposure bracketing. Any ideas?


... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

The main dial on my rebel xti is not working. any thoughts?


... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Fuji S9000 Command Dial stopped working - Fuji Digital Cameras


... Fuji Digital Cameras

The command dial on my fujifilm finepix s9500 has stopped working


... Digital Cameras

When reconnecting my Sony ccd-f375e camcorder using the mains adaptor it initially worked. However when I switched of and on again it has failed to work. The light on the mains adaptor is on which suggests that power is going thru. I have tried to cleaning the terminals on the adaptors connectors to the camera but this also failed. Any thoughts? I have ordered a new battery just in case it is the mains adaptor.


Hi,Sony CCD-F375E is pretty old model camcorder that was launched in July 1991 This type of camcorders got known problem of leaky surface mount capacitors and solution was to replace these leaky capacitors carefully with proper soldering ... Digital Cameras

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks


You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.


In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

My Pentax *ist DL camera has started to give me problems. The rotary control dial on the top left of the body does not work. When I turn it, it does not display the setting as set on the dial. In addition the flash has stopped working. It takes good daytime photos.


Hi,it is best to be sent for repairs, since it appears that something is wrong inside of your camera. Software doesnt respond to the switches, it is best to be not turned on and sent to repairs. ... Pentax K20D Digital Camera

I have a SVP T-100 camcorder which all of a sudden stopped working. What is happening is it keeps showing a red light indicating there is no power in the battery and when you connect to the mains it turns green but when you try switching on it goes red again and stays this way!! I have tried a new battery in it and the same thing...the fact that it wont even work from the mains indicates something wrong with the powering getting to the battery or camcorder... Please help. Thanks Maxine xx


... Digital Cameras

Command dial The command dial has fallen out. It doesn't appear to be broken, but won't engage when re-inserted.


... Fuji FinePix S9500 Zoom Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

1. Mode Dial not working, "Take-Picture-Button" not working.


If the camera was dropped, then it's really causing those kinds of issues like mode dial and shutter button will not work.\015\012\015\012But you could still try these steps below:\015\012\015\012First, do the POWER RESET: ... Samsung Digimax S630 Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1474 seconds