Having problems with your Nikon D3000 Digital Camera ?

My computer doen't recognised new hardware

\015 I have a nikon d3000 and my computer doen't recognise it when trying to down laod pictures, although have used disc supplied. Am using windows xp\015

Answers :

Kindly check that ur comp is fully loded and the usb driver is properly installed
Repair Help & Product Troubleshooting for Nikon D3000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

My computer doen't recognised new hardware


Kindly check that ur comp is fully loded and the usb driver is properly installed ... Nikon D3000 Digital Camera

COMPUTER NOT RECOGNISING THE CAMERA AS NEW HARDWARE DRIVE.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Panasonic Lumix DMC-LS80 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

When I plug in my camera to the computer, instead of getting the two toned alert that indicates that the computer has recognized that new hardware has been attached to the computer, it makes a three tone alert. When I go to "my computer" the camera doesn't show up. But if I turn the camera off, the computer makes the two tone alert indicating that it recognizes that the hardware is uninstalled. What does this mean? I have been able to plug my camera in with no problems for the last four years s


If your goal is to get your pictures, try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a ... Canon PowerShot A75 Digital Camera

HELP My finepix Z100fd won't read any new photos. I have photos from my recent holiday and it will only download onto my computer up to a certain date. I can still see the pics on my camera but the computer won't recognise these and says no new photos. I REALLY need these photos and am beginning to freak out. PLease can someone tell me what I can try????????? Thank you!!


You may have too many photos on the card, did you try deleting the ones off the card after you put them on your computer? ... Fuji FinePix Z100fd Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I put the software disc into my computer,and it started to download.not all the items were downloaded,and when I plugged in the usb cable from the computer to the camera and turned on the camera the message new hardware found did not appear.I uninstalled the three items to try and install them over again,and now when I put the disc in my computer it will not load at all.what can I do?


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Polaroid i733LP Digital Camera

I have a sony S980 and have previously loaded photos onto home computer Now the computer will not recognise hardware- I tried 3 computers . I have tried a card reader to no avail. The card is nearly f


... Sony Cybershot DSC-S950 Digital Camera

When connecting camera to computer, the connection refuses to turn green to upload photos. It has always workd fine until now. The hardware did not show on computer so, re installed camera CD and restarted the computer and still nothing. The camera operates under Picasso, but nothing is being recognised.


Try doing it this way:\015\0121 - Close all applications then shut down your computer, to power off.\015\0122 - Turn the computer back on and wait until it has finished restarting.\015\0123 - Once ready, then un-install ... Samsung Digimax L730 Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.


This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras

I have a Vivicam 3665 and it will not download the pictures to the computer. The computer is new and for some reason , doesn't recognise the camera.


... Vivitar ViviCam 3665 Digital Camera

I have transferred to windows 7. i have installed the olympus disc to my new computer. my camera is the olympus 725sw. on connecting the usb cable, the computer does not recognise the camera. what can i do?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

Digital Trail Camera Model#119223C. Trying to view photos on my PC per instructions on page 12 of Manual. Have H-P Compaq Presario PC with Windows XP Home Edtion. PC recpgnizes that New Hardware Device is found but cannot locate any driver/s for the device. Camera did not come with a CD with software to install. PC does NOT display a new disk symbol under "My Computer". Where can I download necessary software/driver? Thanx!


Hi,\015\012\015\012The drivers required to connect digital cameras through the USB port are included in the Windows XP operating system. So, no drivers are necessary to download or view the images on the PC.\015\012\015\012Als ... Digital Cameras

WILL THE REBEL 300D DOWN LOAD VIA IT'S USB CABLE TO MY COMPUTER WITH VISTA AS MY OS? I CAN ONLY USE AN EXTERNAL USB CARD READER TO GET MY PICTURES. CANNON'S SITE DOES NOT OFFER DRIVERS FOR VISTA 32 OR 64 BIT. SOME SITES CLAIM TO UPDATE ALL DRIVERS, BUT FOR A FEE. MY COMPUTER RECOGNIZES THE CAMERA AS NEW HARDWARE BUT EVEN WITH THE DISK WITH TWAIN AND WIA DRIVERS 5.2.1 IT TELLS ME THERE ARE NO DRIVERS ON THE DISK. THANKS, MICHAEL


Please get it at these links :\012www.nodevice.com/driver/.../Canon/Digital_Cameras.html\012\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Hardware I downloaded the Camedia Master software but I still have a problem.  I attached the USB cable but my computer won't detect the hardware.  What can I do?  Is it possible to get a new camera software disk?  Please help me with this.Kathy Coleman


Problem driver xp driver web page driver noooooooo i whant driver olympus c-3030 xp driver\015\012my e-mail adres \015\012\015\[email protected] ... Olympus Camedia C-3030 Zoom Digital Camera

Was loading pictures from SD card and frame appeared to lock up. It went blank and will not respond even after turning on and off and unplugging for a long period of time. Tried a different card -- nothing -- no response. Called technical support for Smartparts and she had me connect it to my computer -- computer did not recognize any new hardware. Warranty is only 90 days and I've had it six months. Smartparts tech support says there is no repair available. HELP!! Thank you. Barbara


Please try it in another computer.. if it works it detects on another computer then the problem is with ur computers USB . that can be rectified. \015\012\015\012even try these steps which may work for u.\015\012 ... Digital Cameras

My computer running XP Media edition 2005 won't recognise my nv100hd camera. My other computer running xp home will. I have tried uninstalling usb drivers and a new lead. The two items just will not see each other. Any thoughts?


Why not format your computer and install XP Home. Try it, that might work. As you've said, your other computer with xp home installed is compatible with nv100hd camera. - To avoid further hassles, feel free to contact https://www.techienow.com if y ... Samsung TL34HD / NV100HD Digital Camera

I have a new computer and cannot locate my software for my sansung S860-how can I get what I need to view the pictures on my camera... When I plug it in - it does not recognize new hardware


You will have to go to Samsung on-line and download the program and install it on your computer for your camera to work. ... Samsung S860 Digital Camera

Whenever i plug my camera into the computer and wait for the 'new hardware' icon to pop up on the computer, my camera screen goes black and the screen says 'connection fail'. it has worked for almost a year, since i got it. what do i do?


Use a card reader instead of the camera from now on. ... Digital Cameras

When I try to transfur pictures from docking station to computer found new hardware pops up what do i do?


As windows is finding new hardware then the drivers for the camera have not been installed you will need to download the drivers from kodak or use your cd drivers that came with the camera.Follow the prompted directions exactly. ... Kodak EasyShare DX6490 Digital Camera

Computer has stopped recognising my camera!


Could be bad cable so u did get latest software form site tryed back usb plugs not fronts ? try that ... Umax AstraPix 650 Digital Camera

I have a EX-Z3 (product no. 2031914A) camera. I recently upgraded my PC which runs Microsoft Vista - previously I ran Windows Office 2000 Professional and with Picasa 2 had no problems. However, my new computer sappears not to recognise the Casio camera as an attached device...I have loaded and reloaded the software and checked and double checked connections and the USB cable. What could be the problem and is there a simple solution (for a non-technical person)?? Many thanks. Roger Neilson r.nei


Uninstall the software.reinstall the software with camera not connected to usb.this often solves the problem. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2683 seconds