Having problems with your Nikon D3000 Digital Camera ?

I have the standard 18-55 zoom lens that came with the Nikon d3000, and now no matter what autofocus setting I have the camera will not autofocus. Manual focus is fine though. I do tend to switch lenses fairly often. Please get back to me as soon as you can


Answers :

The kit lens sold with the D3000 has 2 switches. One is for Vibration Reduction (VR) "On" & "Off" and one directly above it for Focus marked simply "A" and "M" (Automatic and Manual) See the image below:

steve_con_10.jpg

Make sure that this switch is set to "A", otherwise the Autofocus system is disabled.

I hope this helps! Please rate my reply - thanks.
Repair Help & Product Troubleshooting for Nikon D3000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have the standard 18-55 zoom lens that came with the Nikon d3000, and now no matter what autofocus setting I have the camera will not autofocus. Manual focus is fine though. I do tend to switch lenses fairly often. Please get back to me as soon as you can


The kit lens sold with the D3000 has 2 switches. One is for Vibration Reduction (VR) "On" & "Off" and one directly above it for Focus marked simply "A" and "M" (Automatic and Manual) See the image below: ... Nikon D3000 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

Hi K akima...have followed your advice, but no luck. When I go to continuous mode, it only lets me shoot a single shot, the display briefly reads r 08 then returns to r 09 again. I've tried my other lenses ( Sigma and Nikno ) and they autofocus okay and still show the r09 in the display, but again it won't allow me continuous shots, just the one. The Sigma 120-300 doesn't have an autofocus switch, and i've thoroughly cleaned the contacts. Yes it works manually but I need auto for sports pics. Un


I get r11 but I have a blank memory card which I have just formatted. Sometimes I can take a picture - sometimes I can't. Only bought the camera a fe days ago so wonder if I have set something incorrectly in the menu. ... Nikon D80 Digital Camera with 18-135mm Lens

My Dynax 5D will not release the shutter nor will it turn off unless the battery is removed. The access light and the display remain on when the camera is turned off at the switch. All menus and autofocus work as normal, it will simply not release the shutter in any mode or with any of my Konica Minolta brand lenses.


Always use the best quality batteries available, I used some cheap batteries in my compact and had problems but it came good after a while with good quality batteries. Also the automatic lens protector had some grit stuck in it from the beach stoppin ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

I occasionally get an err 99 when shooting a sequence. It's as though the images can't be written to the card fast enough and it jams. The only way to reset the camera is to turn it off, remove and replace the battery and turn it back on. This is a major inconvenience as it tends to happen more often when I shoot water and the camera is secured in my housing. Please help me!


You should be using a class 6 or 10 card with a fast write speed. ... Canon EOS-1Ds Mark II Digital Camera

Shutter release I just purchased this camera and while I was taking a photo indoors I pressed the upflash button and eversince then every single button I press on the camera (including the off switch) sets off the shutter release. In addition to this problem I can no longer see though the view finder unless I am pressing the shutter release button and then I can momentarily see through the viewfinder. I have noticed that if I press the shutter release button, it does not allow autofocus and it a


Take it back to the shop ... Pentax *ist DS Digital Camera

I have a Nikon D90 with a new Extreme III memory card. I can out in bright sun and often it won't click even though it has focused. It gives me a flashing F--- saying that I don't have a lense attached but I have a Tamron 18-270 on. It also gives me a r17 or21 reading in the ISO/ picture count box. If I turn the camera off, take out the battery, or zoom in and out then sometimes it will take one picture and then stall again. I am loosing some great shots. Help.


F--- IS PROBLEM OF LENS AND CAMERA CONNECTION. CLEAN THE CONTACT MIGHT HELP ... Nikon D90 Body Only Digital Camera

Hi. My Nikon Coolpix s6000 works nice but has one problem--it tends to turn off fairly often on its own. The camera is about 2 months old and the battery is fully charged, yet when reviewing pictures or getting ready to take a picture, it will just turn off unexpectedly. Any ideas if this is common or what may be wrong?


There's nothing wrong...your camera is trying to save the battery. You can go into the menu and set the turn-off time to a longer duration. ... Nikon COOLPIX S6000 Digital Camera

Lens conversion I often use a telephoto lens or another type of lens such as a panoramic. I cannot get my camera to switch back to normal lens usage. I do have the Conversion Lens: OFF in the menu option. In the screen though my camera still shows W========T there is no other. Any suggestions? Usaually there is a line between the W and the T to show zoom conversion. I cannot get that back.


Check the smart zoom precision zoom setting ... Sony Cyber-shot DSC-H2 Digital Camera

Hi, I have a Samsung PL100. When I turn it on the lens extends and then buzzes for about two seconds, the camera will then not focus (though it will zoom in and out). I have to admit that I have had the zoom unit apart to look for anything obvious, so it may need replacing. Is there any procedure I can use to seat the lenses in the correct position before switching on or can you advise on anywhere that sells these zoom units, as I cannot find any suppliers? Many thanks Steve O.


Unfortunately you have probably already turned your camera to scrap. Optical repairs of that type need specialist equipment, and in practice the tolerances are so fine that the only fix is to replace the entire optical assembly.In your ca ... Digital Cameras

Changing lenses yesterday, i switched lenses, took two pictures. A few minutes later i tried to switch lenses and cannot take off the 28-70mm lenses. It seems to be installed correctly and i am suppressing the release button. I have been trying since yesterday.


Hmm the correct way is to turn the lens to te left by pressing the release button, and keeping it pressed untill the lens is of (either turn the camera on the back, facing the NIKON brand on top , te bottom of the camera away form you and the interna ... Nikon D50 Digital Camera

Sometimes the autofocus doesn't work. It is switched to af. When I turn the camera on it will normally focus but after 1 or a couple of pictures it will not autofocus. If I move the switch to Manual I can take the picture and then if I move the switch back to m/a it will focus and keep focusing and I can take a few few more frames then then the auto cocus stops working again and I have to switch back to M and so on. I never know when it wount work. Thank you.


Having received no response in over a month, I assume this is no longer a problem. ... Nikon D70s Digital Camera

I have the Nikon 18-200 lense and it will not autofocus on my D80. I tried other lenses on the camera and they auto focused, so I presumed it was the camera. I sent it for repair, received it after being in the shop and the the 18-200 lenses still doesn't autofocus on the camera. Ideas?


Is the lens autofocus switch set to Manual? ... Nikon D80 Digital Camera with 18-135mm Lens

Everytime I try to zoom in the picture just gets blurrier and blurrier. I've cleaned the lense. I even tried switching lenses. It was fine for the other lense...I tried switching all settings. I didn't drop it or anything..HELP!


It would be useful to know which lens you are using. Have you tried aiming the AF area to a contrasty spot? If you aim at something which is not contrasty enough the AF cannot focus. It can also happen if it is too dark. \015\012I would also tr ... Nikon D60 Digital Camera

''err 99'' code appearing fairly often recently on Canon Rebel XT


To isolate the cause of the issue, do the following: -\015\012\015\012\015\0121. Turn off the camera.\015\0122. Remove the lens, battery, and CF card.\015\0123. Allow the camera to sit without power for approximately 20 minute ... Canon Rebel XT / EOS 350D Digital Camera

Hi, I've a Sigma 28-105mm aspherical 3.5-5.6 lens. Auto focus does not engage. I can hear the motor trying, but the ring does not turn. When I switch to manual focus, I can turn the ring to focus manually, but I still hear the motor trying to use autofocus. Additionally, sometimes the shutter will not fire in manual focus while the motor is still searching. I've cleaned the contacts, but no joy. I suspect a faulty switch, but that doesn't completely explain the autofocus not engaging. I am


Well, I think you have at least one problem pinpointed, in that I suspect the focusing ring is jammed, and cannot rotate with the electromagnet signals. The other problem might be a faulty auto/manual switch. Of course, check for oxidation and e ... Digital Cameras

Having dropped the camera, the lense will not retract and the code 911 appears on the screen each time an attempt is made to switch on and camera immediately switches itself off (leaving the lense out)


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Samsung Digimax S600 Digital Camera

I have a Canon EOS 1000D, and I've had it for almost 4 years. Recently i started having problems with both my lenses. Autofocus works but through the everything appears blurry when "focuses" and thus I can't use manual focus anymore. In conclusion, everything appears blurry through the eyepiece but the lenses obviously work as the pictures come out perfectly clear when using autofocus. What is the problem and how do I fix it?


My canon eos rebel xs works properly for the last 2 years but now faces delayed lcd on problem especially in cold weather ... Canon EOS Rebel XS / EOS 1000D Digital Camera with 18-55mm lens

Panasonic Lumix DMC-FX5. Camera switches itself on even though it is switched off. Many occurrences of this. It has been examined and tested but nothing found wrong. Re-charged batteries run down quickly, even new ones. Comprehensive notes have been taken of the many events. In previous events, it switched itself on, then off again within seconds. This time it needed to be switched off by switching on then off switch.


... Panasonic Lumix DMC-FX5 Digital Camera

I have a Minolta Maxxum 5D which I really like. I take a lot of pictures outside with my job. I have a telephoto lens and a regular lense as well. I switch lenses a good bit depending on the shot. Everything was working well until I now get a message that reads "no lens attached" when there is a lense on the camera. The weird thing is that I only get this message on my regular lense and my telephoto lens works fine. I even carried my camera by a local Minolta/Konic dealer and they were baff


It can occur if the contacts on the lens where they meet the contacts on the camera body need cleaning. Try a cotton swab lightly dampened with rubbing alcohol. ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

I have got Yashica Ez8032 Digital Camera and it suddenly showing Lense Error 21 & 16. It is not getting switched on and no sooner I switch it on it displays the Lens Error and gets switched off. I can't take any pic from it. What can I do?


... Digital Cameras

My IXUS 990 camera has fallen form a 1 ft hight and now lense is not going inside. I am surprised that this is treated by authorised canon repair agency as a broken lense reason. I saw the camera lense didn't had such hit that it will have problem. Now agency propose to change it at a cost of 200 Euro. Is it fair thing to agree?


The lens/zoom mechanism has become misaligned. Its a series of tiny cogs and gears and one or more has slipped a tooth.\015\012\015\012Really and truly, it needs to be dismantled for repair. If you try tugging or pressing the lens, you'll ... Canon PowerShot SD970 IS / IXUS 990 IS Digital Camera

Jammed lens My zoom lens is jammed, and when I switch on the camera the red light switches on but no picture appears on the screen. The zoom lenses remain as they are when the camera is both on or off. (they are jutting out as if the camera is switched on.) Can I repair my FE-210 and if yes how?


Would be best to send to repair center ... Olympus FE-210 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

I have same problem with my 40D. Push the shutter button and it switches off. Have to remove the bettery for it to switch on again several times but still doesn't working. When I put battery back in the camera the access lamp blinks even though power switch is off. Any ideas??


... Canon EOS 40D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1275 seconds