Having problems with your Nikon D300s Body only Digital Camera ?


Answers :

Repair Help & Product Troubleshooting for Nikon D300s Body only Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :


... Nikon D300s Body only Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!

You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim

Return the control panel in order back to normal. ... Nikon D40x Digital Camera

Lens -------------------------------------------------------------------------------- A friend has a Nikon 5700 (almost new) that has the following problem: When you press the shutter release, after the autofocus, the camera send the message "E r r" in the viewfinder display and in the top LCD display, and does not take the picture.beside it give on the monitor a message problem with lens does anybody have information about this problem? or do you have any idea where to ask about? Th

If it is almost new the thing to do is to reurn it to the vendor .\015\012Check out the situation with Nikon customer support. ... Nikon Coolpix 5700 Digital Camera

On the lcd screen it shows "error press shutter release button again" and i do and it wont take a picture and shows error message again.

Reset the camera by taking out the battery or by reset button. ... Digital Cameras

I bought the camera in the UK but I have since moved to Portugal and have only now had a chance to get the new camera out. This, I know, is my fault. But, nevertheless, I can't get it to work - the LCD monitor remains black when shooting whatever I do. It will take pictures via the optical viewfinder okay but I cannot get the screen to show. It works to display the settings etc but not for taking pictures so that when I press the display button it alternates between the photo settings (which

Canon models oddly do not support images on the LCD in every picture mode. Since the LCD works for settings, my guess is its in the wrong mode for the live view and its is not an issue with the camera's LCD.\015\012\015\012Here is a link to the ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Nikon d90 stops working after drop on floor. looks like shutter stuck, show Err. plus lcd only display part of the image, button Live View not function to look through LCD. is it only the shutter problem or more?

You have see first visible damage. However camera should be dropped. D90 is not magnesium case. ... Nikon D90 Digital Camera with 18-105mm lens

[Nikon D90] Showing blinking "err" message, lock up mirror not available, state persists.

... Nikon Digital Cameras

How to fix nikon D40 when the message show on lcd Error. Press shutter. release button again.?

Its a technical promblem contact nikon service 9035871324 in blore ... Nikon D40 Digital Camera with G-II 18-55mm Lens

When i look through the viewfinder its darker than usual, my lens wont seem to come off its stuck even while holding down the release button and trying to rotate it by force. When taking pictures on auto mode the pictures are very dark no matter how much light there is. When i change the settings an ' Err' message is displayed. Whats wrong with my camera???? Help.

Hi tin_080 , the aperture actuating lever was bent or loose and is ahead of the control mechanism ... Nikon D90 Digital Camera with 18-105mm lens

The lens doesn't open when we turn on the camera. The camera makes the sound of turning on and the LCD monitor lights up showing standard Optio display, but the lens don't open neither the zoom. After turning on, the Off button stops working and the only way to turn of the camera is by removing the battery.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio 550 Digital Camera

Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera

LCD monitor does not light up, and consequently, does not display any image (as some other digital cameras do) during the aiming and focusing processes - sort of prescanning the image - before the shutter is half-way then fully pressed. In other words, is the LCD monitor designed soley to display image review (playback) and show menues!

Actually the reason is due to the way an SLR works. The shutter doesn't open up to the CCD device (the digital equivalent of the film) until you press the shutter release button to take the shot. Until then, an angled mirror points the viewed image u ... Canon Rebel XT / EOS 350D Digital Camera

I have a D80 since 2 years and since last 1 week have been getting the 'Err' message. Initially, after referring to the manual & pressing the shutter release button, the camera responded only ONCE. i.e. the 'Err' message disappeared and the pics were SEEN on the screen (which means the shutter was working). Now, even that has stopped. I'm not able to click any pictures (although the mirror moves) and certain specific menus & other buttons on the body dont work. Now on pressing the shutter re

Hi sandeepbhat2, On page 129 of the D80 manual is the factory reset switch. Look on the left side of the camera there is the terminal cover, inside below the USB connector is a small reset button. Give that a try. If still it does not work you should ... Nikon D80 Digital Camera with 18-135mm Lens

Nikon d40 i"ve a nikon d40 camera when tryed the shutter release button it shows error press shutter release button and try again The same problem, Err: Press shutter release button again.

Take the lens off and continue pressing the shutter untill it doesn't react anymore, you should then have a normal menu without the error message.Put your lens on and you're all sorted.Cheaper and less hassle than sending it to Nikon.olly ... Nikon D40 Digital Camera with G-II 18-55mm Lens

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help

As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

I got ERR message on the top left of my lcd monitor D90. I already remove my battery pack. After 1 shot, the ERR message keep appearing. What should I do? Need your assistance.

... Nikon D90 Digital Camera with 18-105mm lens

FE-20, my LCD clear keeps showing CLAR CARD/FORMAT memory card eventhough I did do either clear and format memory card. Also, buy a new memory card, message still shows up CLEAR/FORMAT. I took out the memory and clear the slot so many times, the message still display, what's wrong to my FE-20

Hi kuanhuang913\015\012\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012 ... Olympus FE-20 Digital Camera

LCD Display When I release the shutter, the access lamp(red light) comes on, the pix is not displayed on the lcd monitor and the camera shuts off. Battery is charged. Any ideas? Terry

I was cleaning my CCD and damaged the shutter. Same problem. Click to take a picture and the camera locks up and powers off. Turn the camera back on and the shutter releases and the camera resets and powers on. $281 service call later and Precisi ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the

... Sony Alpha DSLR-A200 Digital Camera

[Nikon D90] "Err" message, mirror cannot be locked up,,,

... Nikon Digital Cameras

Canon rebel xs, the LCD monitor DOES NOT display, the shutter DOES NOT release, and the BUSY indication remains lit in the viewfinder

... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.

Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

Need help the lcd monitor does not show picture but does show display

Go to the canon website and look the model up, there is a recall on it. the same thing happened to my camera about 4 months ago and they tried to troubleshoot it by phone and ended up sending me a shipping lable. They fixed it free of charge and when ... Canon PowerShot A75 Digital Camera

LCD Monitor suddenly does not work. No other apparent problems, and cycling the power or display button does not change the Monitor status.

Which camera is this and does it display the settings or a previously taken pic ? ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3872 seconds