Having problems with your Nikon D3 Digital Camera ?
D3 program modes are overexposing by 2 - 4 stops. Manual mode is OK. This is a sudden problem with no changes to my long time use custom settings
Repair Help & Product Troubleshooting for Nikon D3 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
D3 program modes are overexposing by 2 - 4 stops. Manual mode is OK. This is a sudden problem with no changes to my long time use custom settings
... Nikon D3 Digital Camera
I am having SONY DSC W80 7.2 MP camera. since long back it was not in operation. now to day when i using it its flash not working properly. sometimes flash works sometimes not, some times photo comes dark sometimes very bright even if it flash is on auto mode or in always on mode. kindly advise is it any setting problem or technical problem.
There is problem with flash unit.you have to replaced flash unit.if you know that how replaced then buy from your near service center and replaced by opening your camera.if do not know then best to replaced by sony service center. ... Sony Cyber-shot DSC-W80 Digital Camera
Overexposure My Nikon D40x is WAY overexposing in AV or S mode. Does it need repairing? (a long trip to get fixed). I tried resetting to default store settings, tried using only manual focus, tries changing the metering options. Noe have worked. AV mode worked beautifully 6 months ago in Africa ......
That sounds like the aperture blades may be sticking open.\015\012See if the overexposure gets worse and worse as you close the aperture\015\012When you see these kinds of symptoms, and is usually caused by oil that's leaked on the apertu ... Nikon D40x Digital Camera
Exposure problem Hi,i'm using EOS 1dMK2 for 5 months now & i've noticed the same problem i've had using D60,1D wich is when i set the camera to top ISO speed & high speed continous shooting almost every second shot is underexposed for 1 stop, stangely this only happens indoor under tungsten or flourescent light.I've also tried to:set custom white ballance,shoot raw ,change lenses,set manual exposure & aperture. Has anyone else noticed this ? P.S. Parameters for both pictures are 1/250sec, f4 ,
If you set your meter based on the white (or substantially white) wall, as per the attachment, I would expect the image to be underexposed. ... Canon EOS-1D Mark II Digital Camera
Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.
... Sony Cyber-Shot DSC-HX7V Digital Camera
Not really sure if this is a problem? I have an Olympus E-500 and E-510. When I changes settings on the E-500 (ISO, White Balance, Auto-Focus Mode etc.) it remembers them when I switch it off. The E-510 doesn't. Is it supposed to work this way or is there an obscure setting I need to change? It remembers the time and date and the quelity settings ok. Thanks in advance for any help you can give me.
If you are shooting in the Auto mode and make the changes when power the camera off it will reset back to factory defaults. If you change the dial to P mode, make those same adjustments and power the camera off and then on again it should maintain t ... Olympus Digital Cameras
Not focusing I'm in the process of attempting to help my friend fix his DMC-FX9 camera. The problem is that it doesn't tend to focus on ANYTHING. It will focus if you zoom in [about halfway)or use macro, but it won't focus if it's not zoomed in. I tried changing the focusing modes, the photo modes. I don't know what else to do, has anyone else run into this problem? He's had the camera for to long to return it, so I'm hoping that I can help him make it usable again. [This problem happens indoor
The focus motor is either stuck or broken, i would check this first ... Panasonic Lumix DMC-FX9 Digital Camera
I think it is possible I have inadvertently changed a setting. I use this camera daily to document construction projects. The HP PB360t has always performed perfectly until the last time and now all the pictures are comming out completely overexposed. It is hard to see any details of the image at all. I have tried in low light levels and the images are coming out at all but, poorly. I have experimented in vein with settings. As much as I use the camera I rarely adjust any settings, don't kn
Welcome to Fixya.\015\012\015\012I suggest to you have to reset all the factory settings of your camera. As you said you can used it and the result are perfect. After that if you still not staisfied with the outcome of the pictures that's ... Digital Cameras
The last 2 times i have used the camera, the pix look perfect on the camera itself, but when i transfer the pix to my computer using nikon transfer, they come in very dark and somewhat muddy. never had this problem before. could i have changed a setting inadvertently that would cause this or could i have a camera or a card problem?
Don't forget, the lcd screen on your camera is illuminated and the pics will appear brighter. ... Nikon D200 Digital Camera
Viewing panel I have a new Cybershot, (birthday present in May 06)and I have only used it on two occassions. However, I tried to use it a few days ago and came across a problem to wich I have yet to find a solution. Since, I turned the camera on the very first time everything has been set to the manufacture's suggestion and to automatic settings. This has never been changed! However, when I took a photo the other day the resulting image on the veiwing panel was so small I could not reall
Lies all lies!. first turn on your camera and check what resolution the images are set to record at. turn your camera to picture taking mode and press the trash button once. then you will see the available resolutions you can shoot at. i recomend 4M ... Sony Cyber-Shot DSC-S40 Digital Camera
Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ
Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens
I have the G9 it's 3 years old. On the weekend for the first time I went to spin the wheel to change my scan setting from flora to mountain and it wouldn't change the setting. I tried to use the mannual appeture by using the wheel and it didn't do anything. So it seems the wheel doesn't work anymore. I use it all the time for underwater settings in the housing. Now I can't use it at all underwater. because I can't get it onto the underwater setting using the wheel. What is wrong can the wheel b
... Canon PowerShot G9 Digital Camera
Blurry pictures Using a point and shoot digital camera, it was set on night mode by mistake. Pictures turned out blurry. The snapshots were taken inside at night using flash in the camera. Probably because in night mode, camera was setting depth of field wrong. So using flash and set in night mode was the problem. But can anything be done to correct the blurry pictures taken in this situation?? Any software known to correct this problem? Thank's, Angela Sapp
Adobe photoshop might help. ... Casio Exilim EX-S600 Digital Camera
Blurry pictures I got my camera out for the 1st time in about 5 months, turned it on and it all the sudden WILL NOT FOCUS on ANYTING. No warning signals or nothing. It worked fine last time I used it. I changed the batteries and still no good. Tried all modes but still just a blurr. You can point it a different stuff and you can hear the sound of the lens focusing, but sitll just a blurr. Tried it inside, outside, up close and far away but just a blurr. Even took a picture & downloaded it to my
I just checked out the canon website, there is a link there regarding the CCD image sensory advisory. They are aware of the problem of all of a sudden getting a blurry picture and will fix it for free. Just call the toll free number on the site and t ... Canon PowerShot A75 Digital Camera
Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to
Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera
HI, I have nikon L110 and when i click pictures without flash in portrait mode and auto mode it takes long time to display on screen after clicking the pictures .. but when i use flash it comes quickly . Please help me with this,, whether there is some setting i overlooked. Thank you. H
It takes the same amount of time after the picture is taken for it to appear on the screen. Without flash there's less light and the camera requires more time to collect enough light and take the picture. ... Nikon Coolpix L110 Digital Camera
Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera
I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.
First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras
My camera will also show pics that I have already taken so I know the screen is still good but won't go into camera mode. I changed the batteries, even the card and still have the problem. I have been using fuji s5600 for three years now and it's the first time i encountered such problem
If it won't go into camera mode then maybe the micro switch underneath the swtich is damaged. It's on a small pcb with 2 micro switches for either of the 2 functions. play back and camera ... Fuji FinePix S5200 / S5600 Digital Camera
Everything seems to be working but the shutter release button. It does nothing, even depressing the button halfway for metering shows nothing. no indicators in viewfinder info line. I assumed it was a third party Battery problem, as there was a Impact battery being used primarily at the time. However replacing the Battery with a pentax battery didn't change anything. Camera not dropped, or damaged in any way, its a sudden problem i cannot seem to troubleshoot.
Remove the lens and fire off a few shots. Re-attach the lens and try again. That sometimes works. ... Pentax K10D Body Only Digital Camera
Overexposure problem I am using a Canon Rebel and have it set for RAW, 100ISO, and am deliberately Underexposing by 1 stop, but I am still getting Overexposed images. The histogram is weighted to the left. I am using it on P (program), Av (Aperture priority) and Manual modes. I am new to digtal and may be overlooking something obvious - can anyone help point out my or the camera's error?
Your camera must have an exposure metter in the viewfinder that you can see or? (an arrow moving from -2 to +2 may be or somenthing like that) How do meassure the light? Matrix, center, spot? Check that you may meassure in the wrong way may be. ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens
I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck
Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera
Powershot Sd750 seems to be stuck in the custom mode, it turns on and off, screen works, but none of the buttons work so I can not take pictures or change the settings. This happened before and I recharged the battery and it worked just fine.. this time it's not working.. please help?
... Canon PowerShot SD750 / IXUS 75 Digital Camera
On the Canon G3 I have issues with the main dial on the handgrip (used for aperture shutter speed and manual focus) while in Manual mode. it will change settings only some of the time! is this usually due to dust in the area and can it be cleaned or otherwise made operational?
Thanx for nothing if and when I fix the problem with the G3 I will likely not tell you so that you can charge $9.99 to the next person to ask the same question. This is the kind of scam that I expected and the likelyhood of hearing back f ... Digital Cameras
Panasonic Lumix DMC-T25 When I try to take a picture using any flash mode or on any setting, the flash on the LCD blinks red and will not take a picture. All was going fine during child's birthday party then suddenly started doing this. I have changed batteries but still the same
If you keep getting the problem and you already tried different sets of replacement batteries, then the flash is faulty, usually flash assembly capacitor has blown.To fix the fault there is need to disassemble the camera and replace the f ... Panasonic Digital Cameras