Having problems with your Nikon D40 Digital Camera with G-II 18-55mm Lens ?
"Lens not attached" warning when lens is in fact attached.
\015 Haven't even had the camera for over two months. Suddenly after normal use the camera gives me a problem stating "Lens not attached!" on the settings screen. It will take photos in Manual mode, but camera is not detecting lens. Have tried removing lens, cleaning connections, etc. with no luck. Using standard Nikor 18-55mm lens.\015
Hello. Check the area around the lens mount carefully - specifically the contacts. Make sure all are clean and protruding the same. If one is lower than the rest, try 'flicking' it with a fingernail (lightly) to see if it will pop up to the height of the others. It may have dirt or a particle of dust lodged. If this doesn't help, get the lens to Nikon for a check-up.
Sorry guys dont mean to seem smart but if it is in warranty bring it back to where you bought it. Its their job to fix it.
Repair Help & Product Troubleshooting for Nikon D40 Digital Camera with G-II 18-55mm Lens
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
"Lens not attached" warning when lens is in fact attached.
Hello. Check the area around the lens mount carefully - specifically the contacts. Make sure all are clean and protruding the same. If one is lower than the rest, try 'flicking' it with a fingernail (lightly) to see if it will pop up to the height of ... Nikon D40 Digital Camera with G-II 18-55mm Lens
Lumix g10 owned for 1 week before the following error message appeared "the lens is not attached properly. Do not push lens release button while lens is attached". Lens seems to be attached after much fiddling but cannot get passed the error message
Sounds like a defect...return it. ... Digital Cameras
Lens adaptor I purchased a Phoenix 1300mm lens for my minolta cameras, maxxum 7d digital and analogue. The lens adaptor that was supplied with the lens has no cantacts and when attached to the body and the shutter release pressed, the camera indicates that there is no lens attached. The company that I purchased the lens from in Queensland Australia, and Phoenix themselves no longer seem to be in business so Ihave no results from them. The Phoenix lens is a screw mount looks like early Pentax but
The good news is that it is possible to get the camera to operate with the lens & adapter :-)The bad news is that you'll only be able to use it in manual mode :-(To get the camera(s) to actually fire, you will need to chan ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
I just got the Nikon D3000 for Christmas, new in the box. I began to put it together, and I attached the lens and heard the click and everything. It has an error message that says "Lens not attached", when the lens OBVIOUSLY is attached. I can only "take a picture" in M mode, but there really is no picture at all. All that I can get is a dark image. Please help! Btw, I don't fully understand professional photographical terms, so please explain them thoroughly. Thank you!
Lets get you going on this camera. For the lens thing, the 18-55 Nikon lens is a good one. I'm going to\015\012 assume the lens was loaded while the camera was turned on (not a good \015\012idea). What I'm going to suggest is that you make sure the b ... Nikon D3000 Digital Camera
My Nikon D700 Camera is sometimes not recognizing my having a cpu lens (24-70 f2.8 & 105 Macro f2.8 VR) attached and giving me a the error as listed on user manual page 410 with F No lens attached, or non-CPU lens attached without specifying maximum aperture. Aperture shown in stops from maximum aperture. Aperture value will be displayed if maximum aperture is specified. Pages 210 ? 2 4 (blinks) Camera unable to focus using autofocus. Focus manually. Page 81
... Nikon D700 Digital Camera
My camera turns on by itself even with the slide in front in the closed position. The screen then shows the warning that the lens cover is closed. When I open and reclose the lens cover in 10 or so seconds the camera turns itself back on and repeats with the lens cover closed warning. The only way for me to turn the camera off at this point is to remove the battery. Help!
Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera wil ... Sony Cyber-shot DSC-T77 Digital Camera
My Nikon D40 can only be used in MANUAL mode. I was able to take photos using MANULA mode but for all other modes it says: "lens not attached" even if the lens is properly attached.
What lens are you using ?For all functions to work you will need a cpu lens - ie; a hsm or afs lens,these are lenses with built in motors.Also check the switch on the side of the lens is switched to (A) ... Nikon D40 Digital Camera with G-II 18-55mm Lens
My Nikon D3 is not firing when either of the shutter release buttons are pressed when the lens is attached. Both buttons fire when there is no lens attached. I have cleaned the contacts and the battery and the battery contacts. i have tried the lenses on other cameras and theyre fine.
Do the lenses auto focus on the D3? If not, try cleaning the contacts on the camera body with a cotton swab lightly dampened with rubbing alcohol. ... Nikon D3 Digital Camera
I have just purchased a 500mm mirror lens but when attached to the camera I get the message 'no lens attached shutter is locked' any suggestions please
The lens lacks the electronic circuitry to interface with the camera. You'll need to use the camera in M(anual) exposure mode. ... Sony Alpha DSLR-A300 Digital Camera
I just got a new Nikon D40, whenever i turn it on, a message appears that says the lens is not attached. im sure the lens is attached. i dont have a memory card for it yet, and was wondering if thats the problem or its something else? thanks
Remove the lens, clean the contacts, reattach the lens, and jiggle the lens to seat the contacts. ... Nikon Digital Cameras
My finepix 3800 camera lens ring is disconnected from the camera body. it attaches to the camera body with 3 screws. the screws enter from inside the camera and screw into the lens. How do I attach?? thx Al
You need to remove the silver or black trim ring from the cameras lens barrel by\015\012pushing the silver or black release button located next to the trim ring on the\015\012front of the camera. This exposes the bayonet mount. Find the index\015\012 ... Fujitsu Digital Cameras
When it tun the camera on i either get a system error warning or a remove lens cap warning. Obviously the lens cap is off. The lense is not doing the normal start=up movments.
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Nikon Coolpix 5000 Digital Camera
I have the Nikon D3000 and it is telling LENS NOT ATTACHED when the lens is attached.. what do i do? is there a way to fix it..?
Clean the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Nikon D3000 Digital Camera
It is a mirror lens that i just received in the mail and I attach it to my camera and the camera says lens is not attached. I put it on manual and when i take a picture, it is a black photo. I put a manual flash and it takes 1/4 of a picture
I would think, that the "Contacts" that the camera uses to talk, and identify, with, maybe dirty or bad. This is a communication error between the lens, and camera. Have you tried "Resetting" you camera, with the lens attached? This may help. Are you ... Digital Cameras
Sometime i get an error message on my nikon d90 (lens not attached)why?...i found that by detacching the lens and attaching back fix the problem but i wonder why does that? ps...forgive my spelling
The contacts on your lens or camera may be clogged , just use a pencil eracer rubber one, not syntetic and try cleaning the contacts. look for small black spots ,that can be only removed by a razor. ... Digital Cameras
I keep trying to attach the lens and it keeps saying "lens not attached" on the screen. What should I do?
1.the lens is not suitable for newer Nikon DSLR, e.g AI-Nikkor or PC2.try to clean the mount part at the camera and at the lens with clean-dry cloth3.probably there`s some malfuntions inside the camera, please refer to your Nikon retailer ... Nikon D3000 Digital Camera
Hello I just purchased a .42 wide angle fisheye lens for my panasonic lumix dmc-fz8 and when i bought it on ebay it said its for either a fz7/8. When i tried to attach it today the lens adapter does not fit the thread. I was wondering if maybe the lens on the camera should be taken off? I'm not sure. And it is possible to just use the fisheye lens without the adapter? Because it fits when just put the fisheye lens but when i turn it on it says "please remove lens cap then press play" so I'm very
... Digital Cameras
Sony A300 can not see lens attached/no lens attached message
... Sony Alpha DSLR-A200K Digital Camera
When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens
Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.
Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens
62 size I am assuming that the 62 size will be perfect and it will leave the lens as close to the filter as possible? Is this what I should be shooting for? What if I want to add a macro or a wide-angle lens? Would I need any more adapters to attach another lens, or does it dpend on the lens?
If you want to add other lenses, either macro, wide angle, telephoto or just filters, they go directly on the adapter. That's why the thread size (62mm) is important because that's the best fit for that adapter. If you get other sizes you can still u ... Panasonic Lumix DMC-FZ20 Digital Camera
Tokina AT-X PRO 28-80mm 1:2.8 lens has recently developed a problem when mounted on my Nikon D200. The images are way too dark and my only way to obtain usable images is to bracket heavily. This lens has worked flawlessly on film Nikons and, until recently, worked flawlessly on the D200. I am now also having AF problems with the lens. When I attach any of my Nikon brand lenses - no problems. Can you help? I really love this lens.
I have this lens also but with a canon mount and loved it to death when i had film. I started to use it on the digital and like your experience it worked well for a while then started to produce faulty registered photos.. too dark and some too light. ... Digital Cameras
My canon xl-1 video fell and the screw in metal lens cap was dislocated from the lens housing. Inside, the lens is attached (soldered) to the cap by a bunch of color coded wiring. It can be repaired. But what is the matching order of the color coded wiring inside canon xl-1 16x zoom lens?
Hi,As i saw this Question since Jan, 10, i thought to give you some details. As no one seems to have a wiring for this Model, you could buy a Service Manual Online.I search and came across this site :-http://www.s1 ... Digital Cameras
I have a canon eos 20d that has become permanently attached to a canon 75-300 zoom lens. I cannot detach the lens and fear if I force it it will break the camera and/or lens. The lens is more than 5 years old, and camera 2 years old.
Normally after a while the seal can get stuck at the camera.\015\012Just make sure the camera is a little warmed. Put in the sun for 30 minutes and than twist. Heat normally makes the seal sweat a little and makes losening easier ... Canon Digital Cameras
My Nikon D40 with Nikkor 18-55mm (owned about 15 months) had a puddle of some fluid under it today (lubricant?) I noticed a fluid around the lens when you adjust it. We took the lens off, and reattached it but is says lens is not attached. Do you think this is a camera or a lens problem? We don't have any other lenses to try on it, and if the camera is not going to work, do not want to invest any more money in it.
The Nikko 18-55 is plagued with prblems - take it back to the store and complain. ... Nikon D40 Digital Camera with G-II 18-55mm Lens