Having problems with your Nikon D40x Digital Camera ?

I have a zoom lens attached to the body. I dropped the camera onto the ground. Now the lens release will not work.


Answers :

Sorry, it will require service repair. Contact your local photo shop, go back to where you bought it and have them help you with service warranty, or contact Nikon directly for service support.
Repair Help & Product Troubleshooting for Nikon D40x Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a zoom lens attached to the body. I dropped the camera onto the ground. Now the lens release will not work.


Sorry, it will require service repair. Contact your local photo shop, go back to where you bought it and have them help you with service warranty, or contact Nikon directly for service support. ... Nikon D40x Digital Camera

Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!


THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras

Olympus FE-210 I dropped my Olympus FE-210 when it was on and the lens was out. Now, the camera still workes fine, but the lens will not close all the way. After I shut it off, it opens and closes as if trying to fix itslef, but tops after three tries. The zoom still works, but it makes a clicking noise as the lens adjusts. I wouldn't mind any of this, except that now I can't upload my pictures. Normally, when I hook up the USB, a screen comes up on the camera dispaying my options. Now when I ho


Dont drop it next time you ****** !!! ... Olympus FE-210 Digital Camera

Hi. I use my Nikon D2x and 80-200 f2.8 zoom extensively, generally with a Hama cable release. Recently, the set-up stopped working. The camera focuses, but the release will not trip the shutter. The only clue (with a freshly formatted 16Gb CF card in use) is r17 in the viewfinder, although the manual fails to mention what this means. The cable release works perfectly on my D700 with the same lens. Anyone any ideas? Paul Perton Cape Town


This problem seems to your camera Auto-Focus, first I suggest reset all the focus settigns in your camera.If the "r17" message come on again, and, if you try anything more then that can damage your camera so you can contact your nearest s ... Nikon D2X Digital Camera

Dropped it when taking a picture onto gravel. It wouldnt work at all. Then I pushed the lens and it worked again. Now when I turn on the camera the lens extends and then turns off right away.


I suggest you give my Kludgy fix a goThis is not a joke........This is not a joke........Use a can of compressed air and blow around the lens while it is extended. Take a relatively firm approach with this pr ... Kodak EASYSHARE Z1285 Digital Camera

I have a Nikon D40, which I recently dropped. :( Camera seemed okay, but then I noticed later that the 18-55 lens was being less than cooperative. It now is stuck on 55 adn will not zoom out. It still focuses (manually & automatically). My other lens, which was not on the camera at the time of the drop, works perfectly fine. Any suggestions on what could be wrong or how to fix it?


It sound like the lens zoom has broken.If other lens is ok and this lens still focuses automatically the conection is working.Sorry to bring the bad news but it may cost less to get a new lens than to get it fixed.Someon ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My panasonic Lumix camera DMC-ZS3 dropped and the zoom stopped working. Lens will go out only a drop, not enough to take pictures, and it says: "system error: zoom." Playback only is OK. Is this fixable,and how much would it cost? The camera is fairly new, and I'm abroad now, wanting to take pictures. Thanks, Renee


There is not a big problem if the lens are coming out but not enough..the mechanism is blocked i think will cost about 25$ or something like that ... Panasonic Digital Cameras

My son dropped my new camera on the zoom lens now camera will not work. zoom lens looks stuck and off centre.


Hello!!! remove the battery and press the power button for few seconds and replace the batteries and try switching on!!!! ... Digital Cameras

Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.


This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera

Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

For Christmas this year, a friend gave me a Kodak EasyShare M753 7 mp 3x optical zoom. I have the use of only hand and I dropped the camera on my desk(about 1-2 feet). One side of the lens jammed and would not release and would not take pictures. I kept fooling with it and the black bars in the lens came out. I would think it needs a new lens. Could you tell me how I would go about getting it fixed and the approximate time and cost would this involve.


HiNo 'camera shop' out there will be able to fix your camera, they will all just want to send it to Kodak for a new lens and will want about $150-200 for the job.I know one place online that can probably help you out. Google: ... Kodak Digital Cameras

I dropped my panasonic camera onto the zoom lens. the zoom will not close, the shutter stays open. When I turn on the camera it says "please turn off camera and turn on again." When I do this the same message comes on again. Is it worth geting fixed?


... Digital Cameras

My Pentax K100D has suddenly stopped working. It hasn?t been bumped or dropped or anything. A few days ago I was still taking pictures, and then a day or two later when I tried it, it wouldn?t work. When you press the shutter release button, nothing happens. No autofocus, no picture is taken, nothing. The only thing is that you hear a fairly rapid clicking sound, perhaps like a gear wheel turning or something. I tried various settings, new batteries, a different lens, autofocus, manual focus, ev


Hi there as per your mentioned sound or noise is says that the problem create by your camera lens guide pin. Its damaged or dislocate. So i also suggest you to visit the service center. Thanks.\015\012 ... Pentax K100D Digital Camera

I have a panasonic lumix dmc-fz7. the zoom lens no longers adjust even though it moves when powering on and off. the button used to move the zooms works to move between pictures. the camera has not been dropped or gotten wet


After a bit of research i powered off the camera removed the battery and powered it on. i then recet the it to the factory defaults and it worked fine again. ... Panasonic Digital Cameras

Regina's camera I have a Kodak EasyShare V550 Digital. Worked great until...I dropped it from about 3 feet onto packed sand. Now I can still review the pictures I've taken, but when I go to take a new picture, the lens comes out then retracts. Is there any solution or did I trash the camera with one small drop?


I have the same problem. I turn on the camera and the lens comes out and then back in. I cannot take any pictures. I updated the firmware, and that does not work. does anyone have any suggestions?? ... Kodak EasyShare V550 Digital Camera

I dropped my kodak camera on the ground and it stopped working. The zoom lens was not working and it stopped taking pictures.


Try to switch on the camera then push the zoom button while gently slapping the camera (it wil help only if rings are not broken ... Kodak EASYSHARE M340 Digital Camera

AV error whn pentax ist DL & Quantaray zoom lens attached


I've got the same problem. The problem is that the lense is loosely attached to the body. What you need to do is that when you see the Av flashing, press the lense of the camera to the body and twist the lense to the left a bit. This tightens the ... Pentax *ist DL Digital Camera

My Nikon Coolpix L12 will power on but won't take a photo. There are no error messages on the screen. The lens will extend and retract. The zoom works. The shutter release button depresses but will not "snap" a photo. The card in the camera is fine and is recognized by camera. Thanks for your help!


Well, seems like a camera failure to me,actually the processor inside the boards is wrong, maybe your product is a failure ones, I think it's better for you find the dealer or service center to solve this problem.But, you can try remove t ... Nikon COOLPIX L12 Digital Camera

Have a nikon zoom 8 mega pixel digital camera A coolpix 8400 we have attached a wide angle lens 'wide converter wc-e75x We are an estate agency and take pictures of rooms, often into the light / with the bay window in the centre. We have recently bought a Nikon speedlight sb-600 to brighten the pictures. This seemed to work for a while, but nw all the pictures are VERY dark whichever setting we use. 1. What setting should we be using for internal shots af large reception roomks on dull


... Nikon Digital Cameras

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

Samsung ST30...the unit was dropped then the zoom did not operate manually and the view on the lens became blurred...what will i do? thank you


... Samsung Digital Cameras

Lumix g10 owned for 1 week before the following error message appeared "the lens is not attached properly. Do not push lens release button while lens is attached". Lens seems to be attached after much fiddling but cannot get passed the error message


Sounds like a defect...return it. ... Digital Cameras

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Lens adaptor I purchased a Phoenix 1300mm lens for my minolta cameras, maxxum 7d digital and analogue. The lens adaptor that was supplied with the lens has no cantacts and when attached to the body and the shutter release pressed, the camera indicates that there is no lens attached. The company that I purchased the lens from in Queensland Australia, and Phoenix themselves no longer seem to be in business so Ihave no results from them. The Phoenix lens is a screw mount looks like early Pentax but


The good news is that it is possible to get the camera to operate with the lens & adapter :-)The bad news is that you'll only be able to use it in manual mode :-(To get the camera(s) to actually fire, you will need to chan ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

My kodac Z1285 stopped working and the whole lens is out, after i clicked the power it started ok then i zoomed in, after the lens is completely out ''maximum zoom'' it stoped working and never come back on. the batteries is fully charged, although i tried another fully charged batteries i was thinking just to go to the screws and open it to see what is happened but i don't know, what shall i do?!


Don't open it!! That will void any warrenty the camera has! Have you tried cleaning it with Denatured Alcohol? You can puchase it at any store with a hardware dept. Just soak a q-tip in the alcohol and swab the camera down. It's safe to use on the sc ... Kodak EASYSHARE Z1285 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3244 seconds