Having problems with your Nikon D70s Digital Camera ?
Display will not come on
\015 I have a NIkon D70 and the display will not come on so I can change menu settings. When I take a picture it shows in the display but cannot do anything with it.\015
Turn your command dial to P or to auto. Press the menu button. The screen should light up with the main menu. If it does not, find the two buttons on your camera that has small green dots beside them. Press both of these buttons together at the same time until the LCD screen flashes on the top of the camera. Now try to access the menu again. If that does not help, call 1-800-nikonux for their 24/7/365 tech help
Repair Help & Product Troubleshooting for Nikon D70s Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My Canon Powereshot 200SX IS does not start properly. Display comes on but the lens stays closed inside and a led blinks. After a while display turns black, a beep comes on and the white text says: there is an error, try to start again. Starting it again brings exactly the same situation. Loosing the battery does not help either. Camera seems not to react to any control buttons. There has not been any any obvious reason for this, no falling onto the ground or any other impact.
See http://www.fixya.com/support/r13011856-lens_error ... Canon Digital Cameras
My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.
... Canon PowerShot A400 Digital Camera
When I turn on my camera to take a picture the display screen is completely black. If I try and take a picture nothing comes out. The whole picture is completely black. The camera is still functioning as if it is taking the picture. The flash continues to work, but unfortunately no picture comes out. But when I switch to the display mode to view my pictures, I can see the old pictures from my memory card. But I just can not take any new pictures. What should I do? What do you think the problem i
Hi there,You can refer to this page as this is helpful for most of the issues related to Digital Camera.Fix th ... Canon Digital Cameras
Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist
First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera
Focus problems Hi, my camera is not focusing clearly. We just used it recently and can look at clear pictures on the display screen but now when we go to actually take a picture it's blury (on the display screen and if a picture is taken). I also notice that all these different setting menu's come up on the display screen when we are in take picture mode. I took it in today and they said the lens could have been bumped or that their is something wrong with the focusing inside. So they would hav
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera
I just read how to fix the led display on Sony's UVW-1800 betasp deck... it seems simple after pulling the front cover all I have to do is pull out the 2 flat ribbon cables above the display and it will come out... but my machine... the display is soldered into the board... about 50-pins worth... is there something I am missing here?
If 50 pins are soldered into the board, then they changed something about its manufacturing between the time the UVW-1800 betasp deck was made and the repair information was published. \015\012\015\012It's not uncommon for consumer electr ... Digital Cameras
My Camera will turn on but the display is black. I took a picture to see if the light in the display was messed up but it is taking black pictures. My husband messed with the display settings and it worked for a little while and it went black again and will not come back.
Reset your gadget to factory defaults........ If the problem is due to wrong settings then it will solve it. And If not, then their could be a mechanical problem so, get it serviced................ ... Samsung BL103 Digital Camera
The LCD display on my Canon PowerShot SX10IS hasn't worked for some time. Today I hit the display button and it suddenly came on. When I hit the Display button again it went off and won't come on again.
It sounds like the ribbon connector to the dispIay might be loose, and needs to be reseated. You YouTube has some informative videos, but, basically, you have to take the back cover off to do this, which involves taking about 5 or 6 small screws o ... Canon PowerShot SX10 IS Digital Camera
My camera comes on but the screen will not display. I can take a picture but cannot review them. If I put the card in the computer, the pics are there but have no screen display.
... HP PB360t Digital Camera
My CoolPix L10 camera display will not turn on - it sometimes will work as a video recorder, but I cannot get the display to come one. A red light just above the menu button will flash and then go off and the on light flashes. The camera is only about a year old and used to work great. Please help!
Change the battery..........................................sodeep ... Nikon COOLPIX L10 Digital Camera
NIKON D70 I have a Nikon D70 Whilst taking a series of photographs I get through to about 40 images then the camera stops shooting and the format card display comes up on the display. If the CF card is removed the images taken are ok and can be down loaded. If the card is then replaced without deleating the images then further images can be taken until the problem re-ocurs. I have tested the camera by taking a full card of images all at once and there is no problem. The issue seems to ocur if th
Problem in card holder repair or replace ... Nikon D70 Digital Camera with 18-50mm Lens
Fujifinepix F30 Hello the digital display on my camera suddenly stopped working- camera comes on, display lights up white, and camera is operational except - cant frame, see settings, etc - this stinks! camera did NOT sustain any known damage.bizarre but true- HELP cant afford to replace- thanksNeal
Maybe it the connector inside is loose, you might try to open the case (a 5 euro triblade / triwing screwdriver is needed) and see if any of the connectors is loose, before sending it for a 160 euro repair. ... Fuji FinePix F30 Digital Camera
Camera will not turn on.When I put in on the charge dock the light blinks but it never charges.If I press photos on the charger the camera comes on and displays photos.It still wont come on without being on the charger.
The cameras rechargeable battwery is worn out, so it will no longer hold a charge, open the battery compartment door, and remove the battery, then copy the information on the battery and purchace a new one that is identical to the old one at a specia ... Casio Exilim EX-Z57 Digital Camera
Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i
Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
I have my camera Cyber-short dsc-w220, it has fall down but it was in its cover,after that when I turn on the zoom is coming and going off then after it display this: ''turn the power off and on again''. when I do that it becomes like that and soo on. I can't take any picture but It can display the picturs inside. please Advice. Thanks
I am afraid you have bad the lens assembly and it needs to be replaced. ... Sony Digital Cameras
Display screen how do i get my display screen to come back on?
... Digital Cameras
Powershot A75- While using the camera for takingpictures the picture does not come on the display panel-it can be seen thr, view finder and picture can be taken-how to bring display in to working.
Just press the display button when you want to take pictures.Please Rate Thanks! ... Canon PowerShot A75 Digital Camera
When the camera is turned on the lenses won't come out, it displays "lens error". what is preventing the lenses from coming in?
... Digital Cameras
LCD Display When I release the shutter, the access lamp(red light) comes on, the pix is not displayed on the lcd monitor and the camera shuts off. Battery is charged. Any ideas? Terry
I was cleaning my CCD and damaged the shutter. Same problem. Click to take a picture and the camera locks up and powers off. Turn the camera back on and the shutter releases and the camera resets and powers on. $281 service call later and Precisi ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
New camera SX110IS - worked for a dozne pics or so. Now the view on the display is black for pictures. Pictures come out black. Display works ok as I am able to review previous pics. shutter issue? settings?
Hi,Please RESET camera from Menu option, if that helped and bring live view back to take picture then fine, otherwise IRIS is bad in lens assembly and its job of qualified camera tech to replace / repair lens assembly.Hit "add a com ... Digital Cameras
I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau
The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera
I have a Canon SLR 400D and the LCD screen won't view anithing unless i press teh display button and the display details comes up. if anione got a solution for this problem can u pleaze write as soon as possible thanks.
Hi,Screen blanking is often a part of the power saving profile. Have you tried changing this in the Tools menus? You should be able to alter the screen blanking time out to a longer period or a disabled setting. I suspect yours is very b ... Canon EOS 400D / Rebel XTi Digital Camera
Have Olympus U700 All Weather camera. When I switch it on the lens comes out fully, retracts, comes out half way and finally retracts again. 'D: 5e02' is displayed on the screen. Any ideas. Thanks, Simon Wright
... Digital Cameras
Hi there, I have a Canon Powershot S3IS and just lately when you try to turn it on it comes up with a message that says E24. I have looked through the manual and cannot find anything resembling this message. It turns on for a few seconds and then the screen goes black and displays the E24 message. I was taking photos during a recent wedding I attended and then it cut out suddenly and displayed the E24 and since then will not turn on. Please help me as my brother and his family are arriving soon
... Digital Cameras
I have a JVC GR-SXM245U. I want to know how to get rid of the time-counter display in playback mode. I don't have a remote (this model didn't come with one) and there is no 'DISPLAY' button. Thanks!
... Digital Cameras