Having problems with your Nikon D80 Digital Camera ?

I have started to get over exposure warning (Black flashing) in highlight areas even though the ISO is set at 100 or auto. What is causing this please?


Answers :

Is your exposure compensation setting too high?
Repair Help & Product Troubleshooting for Nikon D80 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have started to get over exposure warning (Black flashing) in highlight areas even though the ISO is set at 100 or auto. What is causing this please?


Is your exposure compensation setting too high? ... Nikon D80 Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!


Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks


This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

My nikon D40 is taking dark pictures on P Mode even when the flash is in use, and the white balance is set to auto, but the ISO setting is set to 200 and won't let me go to Auto. The Exposure Compensation is at 0.0 I am running out of options. How can this be fixed?


Hi,Check if your shutter speed is not to fast. Try using a longer exposure time.Cheers ... Nikon D40X Digital SLR Camera Digital Camera with 18-55mm Lens

My d40x auto focus has stopped working and even though its set for auto focus it wont take a picture it will only on the manual setting


Problem in lens ... Nikon D40x Digital Camera

Dim Photos My G3 has begun to take very dim photos, all iso speeds are affected plus Auto mode. It can barely focus, even with the assist light on. If it was the light meter (setting too high an aperture?) it would probably be able to focus, right. When I take a picture it always sets f2.0 1/60 sec, even at iso400. Is it the image sensor?


Put the camera in to the full auto mode. If the pictures are still dark, it is possible that the apature inside of the lens is not working. There is a micro-motor, gear assembly, iris leaf assembly, and a servo amp circuit that drives the apature. Th ... Canon PowerShot G3 Digital Camera

I am getting white photos outdoors. I try changing the iso setting to different setting and still getting white photos even if the iso is on auto.


Try to flash off mode. ... Canon PowerShot A460 Digital Camera

I have cyber shot DSC-S730 even though setting is set for flash on or auto, flash doesn't work. Symbol on the bottom left appears, but I don't have a manual to troubleshot. Can someone help?


... Sony Cyber-Shot DSC-S500 Digital Camera

Coolpix s8000 digital camera: Unable to get red-eye button whn pressing flash mode as per page 31, only 2 options i.e. flash auto and no flash. ISO - unable to change the iso function. Set at manual. Also, unable to change to black and white option. Please help. [email protected]


Dear Friend,\015\012\015\012All the functions are not available on each and every mode. So first ensure that you have selected right function and compatible mode.... but from your question it seems that your cam is not acting as per manual... T ... Nikon Digital Cameras

How do i set flash for just one flash. it goes off many times for each shot even though "auto" is selected. thank you.


Depends on the camera. Most cameras set on auto that multi flash is only to make sure that the sensor inside is getting the right amount of light. What type of camera is it? ... Digital Cameras

When I try to take a picture, I have to hold the capture button down for a long time, and more often than not the picture will not take at all. Often when it does, it is out of focus, even though I have the setting on auto and there is a lot of light


... Samsung S1050 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

Why is my Cannon Power Shot SD1000 no longer taking clear pictures? It use to work beautifully, but now the pictures are always blurry! I always get the little red "crab" in the bottom left corner also, even though I change the ISO. Please help.


Probably the image stabilization going out and just needs that part of the camera replaced. Try this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they do terrific work on these cameras. If you need to have i ... Canon PowerShot SD1000 Digital Camera

DSC-55 camera flash doesn't work even though in Flash "Auto" setting in Easy or 'i' mode.


\015\012If the Forced flash setting is already enabled and the flash is still not\015\012working, then the issue may be due to another camera setting. Even if the\015\012Forced flash setting is enabled, the flash will still not work in ... Sony Digital Cameras

I have an Olympus E300 and I don't know what I did but when I turn on to take photos now the display shows "0" photos available to shoot even though I've essentially cleared all images off; and when I press the button to shoot it will not snap. I have tried the factory reset ( P setting, w/ open FC door holding playback and ok etc etc ..) and this has not helped. Help! Thanks....Sandra


Hi Sandra,\015\012\015\012I would suggest that you format the card in the camera.\015\012You will need to insert the card in the camera and then go into the camera's menu system and choose format.\015\012\015\012In case ... Olympus EVOLT E-300 Digital Camera

Storage setting i cannot find the menu where in i can change the storage setting of my camera. it uses its internal memory even though it has a SD card inserted in it and even though the SD card is unlocked, the camera cannot read it still.


... Sony Cybershot DSC-W180 10.1MP Digital Camera with 3x SteadyShot Stabilized Zoom and 2.7-inch LCD Red, 10.1 Megapixel, 3x Optical/2x Digital Zoom, Digital Camera Red DSC-W180/R

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

I just got a Nikon 50mm f1.8D for my Nikon D60, when shooting in low light settings the images come out grainy. How do I fix this? My ISO is set on Auto and I've the ISO at 100 or 200 and still grainy. What am I doing wrong? How can I fix this?


Take the ISO off auto and just set it manually. ... Nikon D60 Digital Camera

I have a panasonic lumix G2. Im only a beginner with a SLR camera so im a bit stuck. I have the Camera set on A but for some reason the screen & photo's are very dark. I have tried changing the apature & shutter speeds & also tried restring settings but nothing works. However if you return to the intelegent auto button it's perfect but defeats the whole reason that I brought the SLR in the first place. Please please help. Thanks. Julie Leach


Julie, you're asking for a course in DSLR photography. We don't have the space here for that. Where is your owner's manual? If you follow it carefully, it can answer all your questions. ... Panasonic Lumix DMC-LZ2 Digital Camera

Have the Nikon D90 camera and it does not allow me to take pictures when ever I want. It is in full auto mode and just does not want to take the picture even in bright day light. The F keeps on blinking in full auto mode and even if I switch to manual mode it does not allow me to change settings. It is very frustrating! what is wrong with this D90??


The blinking F-- means that the camera doesn't think a lens is attached. You can try removing the lens and re-attaching it. Or if you have another lens, try that. There are quite a few reports of this issue with the 18-135 kit lens. ... Nikon D90 Digital Camera with 18-200mm lens

With my cano powershot sd960 is i cannot seem to adjust the ISO speed. when in the portrait, kids/pets, settings i press the funct set button to get my list of different options . i can see "ISO Auto" on the list, but i can't seem select it to change it.


When using the programmed modes, like portrait, kids, etc. you cannot set the ISO speed manually. The reason for this is because in those modes you are asking the camera "can you please set ideal settings (ISO, shutter speed, aperture, e ... Canon PowerShot SD960 IS Digital Camera

Sony w300 hi everyone ,,, how can i return the settings to the default ,,, cause now i change the settings and the photo apears dark ,, please help me to set the settings to get best photo and on what value of EV i set thank you


You should see that option in the tools menu to reset all factory options to default. ... Digital Cameras

Each time I switch my Casio Exilim ex-fc100 camera on, the set time and date menu appears and my previous setting are lost (like photo resolution, flash setting and so on) like it is re-set everything. This happens even if I do not remove the battery. Can you help me, please? Max [email protected]


... Casio EXILIM EX-FC100 Digital Camera

Hey there, im getting a memory full error message on the camera even though there are no pics remining on the camera. Please help im on vacation!!


... Olympus SP-560 UZ Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2767 seconds