Having problems with your Nikon D80 Digital Camera ?

I have a Nikon D80 and one day, I suddenly couldn't take pictures. When I turn my camera on, it automatically blinks the Err message. My shutter mechanics work fine, it recognizes my lenses, and playback is fine, but I can't change any of my setting and it acts like the sensor doesn't work. Is there anything I can do to fix it?

Answers :

Had same problems. The shutter is faulty although my D80 only registered about 2,000 shots.
\015\012Get it fixed at Nikon Service Center. It's your only option. Cost me $120.
Repair Help & Product Troubleshooting for Nikon D80 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Nikon D80 and one day, I suddenly couldn't take pictures. When I turn my camera on, it automatically blinks the Err message. My shutter mechanics work fine, it recognizes my lenses, and playback is fine, but I can't change any of my setting and it acts like the sensor doesn't work. Is there anything I can do to fix it?

Had same problems. The shutter is faulty although my D80 only registered about 2,000 shots.\015\012\015\012Get it fixed at Nikon Service Center. It's your only option. Cost me $120. ... Nikon D80 Digital Camera

I have a Canon T1i Rebel. My aperture is frozen in manual mode. Works fine in AV mode. I have checked it out on 3 lenses. The camera knows I have changed the lens, I have taken the battery out all night, I have reset the camera back to default settings too...

Not knowing your experience level, I want to make sure that you are (in the Manual mode) attempting to change the aperture by holding the aperture button with your thumb while rotating the main dial to increase or decrease the aperture value. If you ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea

I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.

Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

No flash camera works fine but flash won't work at all on any setting,the battery is fine,it's probably the lamp,how do you change it.thanks.

It is a problem that has happened to 2 out of 2 of my Stylus 410's. Olympus will not reapir them unless they are under warrenty (or for $175). I filed with the BBB...we'll see if that helps. They really need to recall them. Good luck. =) ... Olympus Stylus 410 / ? 410 Digital Camera

LCD screen I am using my sisters camera over the next two weeks and cant figure out how to get the lcd screen to work while i am taking a photo. It is fine to review the photo and takes photos fine but i can see what i am taking the photo of unless i look through the eye piece. I cant get hold of her for the next two weeks and i dont have the manual can anyone help? Is there a button or setting i have to put it on?

Unfortunately it is not possible to preview the picture on the camera's LCD screen before you take it.The 300D is an SLR camera. What this means is that as light comes in through the lens it is deflected by a mirror (which sits in front o ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Powershot Sd750 seems to be stuck in the custom mode, it turns on and off, screen works, but none of the buttons work so I can not take pictures or change the settings. This happened before and I recharged the battery and it worked just fine.. this time it's not working.. please help?

... Canon PowerShot SD750 / IXUS 75 Digital Camera

When I attach my lense the automatic focus will not focus. This is not a problem with my other lens. I have tried changing the settings, taking off lense and putting it back on - nothing seems to work. I can take a picture with it on autofocus but may not be in focus.

Read the tips on this provided webpage I have posted below. It will help you out for it has hepled me with mine\015\012\015\012 http://www.kenr ... Nikon D40x Digital Camera

I have a Nikon D80 camera that is about 1 year old. I has worked fine until about 6 months ago. Sometimes when I turn it on and press the button to take the picture nothing happens. I have to wait awhile and keep playing with the button and then it will finally take the picture and act normal. This happens inside and out. Sometimes the flash will pop up outside in direct sunlight. Do I have some settings wrong or why is it acting like this?

Are you getting a Err message? If so The ERR message is not a good thing. Read page 132 of the D80 Manual. Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector ... Nikon D80 Digital Camera with 18-135mm Lens

When I shoot on Apeture Priority my pictures appear washed out. I have tried changing the F-stop from 2.8, going lower, but nothing seems to work. I have also adjusted my ISO. When I change the setting to Auto the color is clear again. I have a nice Nikor 80-200 2.8 lense that I want to use for Volleyball action shots, but I can't figure this problem out.

Having gone over a month without a response, I assume this is no longer a response. ... Nikon D90 Digital Camera with 18-105mm lens

The screen on my EOS 350D no longer works. I cannot change the settings or view pictures, but the viewfinder is working fine.

Either your Lcd contact which connected to main pcb is come out from board or LCD is burnt out. \015\012could be main pcb not giving signle to back cover. you need to relaced main pcb or LCD. ... Canon Rebel XT / EOS 350D Digital Camera

Coolpix P60 - had it hooked to tv to view photos - was working fine. Unhooked it and now the lens stays out - it retracts when you hit the on/off button, but the lens always pops out again. Cannot view anything (viewfinder and screen are both blank except for camera settings). Have changed batteries, put in a different memory card - nothing seems to work..

Hi,\015\012\015\012Please try to hook up at TV again and see if still functioning there. Then press |[]| to alternate between displays.\015\012\015\012It hope it will work.\015\012\015\012Cheers! ... Nikon COOLPIX P60 Digital Camera

I cant figure out how to change the iso on my fuji finepix S9500... and I cant work out what would be best settings for indoor shooting a band with dim lighting and flashy lights... should I use a flash

Not sure about the latter, but the 'F' button between the live screen and dial will give you the iso choice, and colour options. ... Digital Cameras

Hello, my powershot screen doesn't work when I try and compose a picture but works fine when I review the picture. Is this a result of a setting I can change?

HelloThank you for using FixYa for your problemyer in the settings you can have it turned off or on while picture takingPlease rate our solutions and if you still have problems please call back for mor ... Canon PowerShot A560 Digital Camera

Have new Nikon D80 camera which was working OK, but now monitor only works in playback. Have I incorrectly pressed a button or changed a setting to cause this? If yes how can it be restored Many thanks for any help. Terry O'Keefe

Heres how to reset itRESET\015\012 Find the two buttons with green dots next to them on the top right of the D80 ... Digital Cameras

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co

I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you! I have the same problem the flash not work will

I started poking all the settings in my Sony DSC-100,and the E:91:01error was on and the flash symbol started to flash.I called Sony no help.I went to the menu then setup.I went to camera one notch ... Sony Cyber-shot DSC-W35 Digital Camera

Hello, I have a sony DSC-T70 and I cant change the flash options. i should be able to select the flash icon and choose my flash setting, but the only setting is no flash. I really want my flash to work as my pictures are not coming out.

Hello\015\012\015\012Have you consulted the manual in this?\015\012\015\012http://\015\012\015\012 ... Digital Cameras

My camera wont take pictures Everything worked fine on my camera until one day it wouldn't take any pictures. Everything except that is fine. I tried changing the settings and still nothing happens.


Trouble Connecting I went to upload my pictures onto my MacBook and the camera won't connect. It had been working fine before and I hadn't changed anything. I tried taking out batteries and memory card, switching USB ports, and making sure the camera was set on USB and not the disk setting. What else can I try?I feel like I had this problem before and maybe it had something to do with Rosetta on Macs...could that be it? But I don't know how/where/what to do for that.Thank you,Tia

Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... HP Photosmart M425 Digital Camera

My canon powershot s45 works fine , until i plug it into my computer. then it wont even power up . its not my ports or cords i checked them. i dont have the manual & i think that a setting was changed or something . what settings do i need it on to transfer my pics to my comp?

When connected to the PC the cameras display will blank out, this is normal. If the cameras "Communication" setting is set to "Normal" you can only download images when the cameras drivers have been installed of the bundled CD. If you change it to "P ... Canon PowerShot S45 Digital Camera

Flash problems Hi i cant get the flash working on the E 510. tried to change the settings, but nothings seems to work. Can there be a short in the wire system or can the bulb be burnt out?

Yes and yes. If you've popped it up and it won't fire, it looks like you're in for a repair, hopefully under warranty. ... Fuji FinePix E510 Digital Camera

I have a nikon d 3100 and its been working fine...had it about 8 months...today the top part of the pictures and videos are coming out black but the rest of the picture is fine...is there something going wrong with the sensor and how can i fix it? we changed the memory card but that is not the problem...we tried other lenses but the problem persists

Try by cleaning the ccd/filter ( consult a camera doctor) ... Nikon D3100 Digital Camera

Have lost instruction manual for lumix DMCTZ5 was working fine untill son used it he has changed some settings I think because all the pictures are blurred now and it is not a dirty lens dont know how to set it up to take pics without the blurr thanks michele

Contact yur manufacturer either by mail or phone number, look up on the internet the company name and there should be a "Help" Page provided. ... Panasonic Lumix DMC-LZ2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3058 seconds