Having problems with your Nikon Digital Cameras ?

Manual options & screen review not working on D80

\015 I was viewing photos on my D80 when the screen froze. I turned it of and on again now It starts up, and only works in auto mode. My preview doesn't work and I can't access or adjust the shutter speed or aperture in manual mode - any suggestions?\015

Answers :

Take out the battery
Repair Help & Product Troubleshooting for Nikon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Manual options & screen review not working on D80


Take out the battery ... Nikon Digital Cameras

View screen My lcd screen is not working when i take a photograph. It is still working for  the menu options and to review pictures, but as soon as I move to picture or movie mode it switches off to black.


Change the battry guys.. your batteries are dead......... ... Sony Cyber-shot DSC-W80 Digital Camera

LCD screen I am using my sisters camera over the next two weeks and cant figure out how to get the lcd screen to work while i am taking a photo. It is fine to review the photo and takes photos fine but i can see what i am taking the photo of unless i look through the eye piece. I cant get hold of her for the next two weeks and i dont have the manual can anyone help? Is there a button or setting i have to put it on?


Unfortunately it is not possible to preview the picture on the camera's LCD screen before you take it.The 300D is an SLR camera. What this means is that as light comes in through the lens it is deflected by a mirror (which sits in front o ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

I have a D80 since 2 years and since last 1 week have been getting the 'Err' message. Initially, after referring to the manual & pressing the shutter release button, the camera responded only ONCE. i.e. the 'Err' message disappeared and the pics were SEEN on the screen (which means the shutter was working). Now, even that has stopped. I'm not able to click any pictures (although the mirror moves) and certain specific menus & other buttons on the body dont work. Now on pressing the shutter re


Hi sandeepbhat2, On page 129 of the D80 manual is the factory reset switch. Look on the left side of the camera there is the terminal cover, inside below the USB connector is a small reset button. Give that a try. If still it does not work you should ... Nikon D80 Digital Camera with 18-135mm Lens

When i turn my camera (cannon powershot SD1100 IS) on the screen is black like it can not see through the lens. I can still see all of the menu options on the screen. If I try to take a picture it will still take a picture and the picture shows up just like it is supposed to. I can still review the pictures on the camera. Everything else seems to be working fine.


This could be a firmware problem.First, check your screen settings, should be in the setup menu. You may have the screen switched off, often used as a power save option.Secondly, if its still under warranty, go back to the ven ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Canon sd450 won't automatically load pics from camera to computer suddenly. have to do it manually which is more time consuming. what could be wrong? usually camera screen goes grey and asks about transferring pictures. now although it communicates with the computer, it does not offer any on camera options nor does the image transfer button work.


Try using a separate card reader to download your pictures to a folder you create on your desktop. ... Digital Cameras

When I turn in my camra on evrything works but all I have is a black screen, all the white lettering and blue sintering lines are there but no pic, when I try to take a pic it will flash and sound like it took a pic but when I go to review the pic its black and looks like I took a pic in the dark. All the pics that I took before I had this ploblem I can review. Evrything works besides the pic on the display screen during and after I take a pic but all the menu and setting are on the screen but t


Then get ur camera screen repair ... Kodak EasyShare Z760 Digital Camera

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -


The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

When I turn on the camera, it will AF once, then nothing. None of the menus will work, none of the functions work, cannot review pics. If I switch to manual and back to auto, it will AF once. I can take a picture in manual. As soon as I take a picture, I can use the menu or review pictures, but only once. Battery shows to be charged. I have taken it to 2 camera shops and they have no idea.


The problem is in the systems control board, "controls vital areas of the camera" from your description the operation is intermittent when switching from manual to auto, it indicates an hairline crack in the systems board, a tough problem to nail dow ... Sony Alpha DSLR-A100 Digital Camera

Hi I purchased Samsung HMX 200 and it was working fine. But one day it stop responding for the touch screen, thought the manual buttons are working and display is also working fine but the touch screen is not working. Could you please suggest what can be a problem and how should be resolved. Thanks


... Digital Cameras

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make


These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras

Powershot s410 My s410 is "old" :( but I love it and has been working amazingly over 10,000 photos in the 4 years I've had it. All of a sudden this week-end when I am in auto or manual mode the screen is black - I can't see what I am shooting. What is odd is that if I am in the panoramic mode or video mode the screen works. Even odder is that if I actually take a picture blindly (since the screen is black) it shows up on the display! Help... :) Thanks


Since it is taking a picture, and showing it up afterwards on the display, it definitely sounds like you activated the DISP or DISPLAY button. Seeing that you've used this camera for years, you should know that this manually turns the screen on and ... Canon PowerShot S410 / IXUS 430 Digital Camera

Lumix DCM-TZ3 the review screen works but the picture screen is black except for showing all the display info white letters. The lens also works with flash as if attempting to take A picture. Could this be corected by installing A new lcd screen display? thanks don calmus


... Panasonic Lumix DMC-TZ3 Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

White screen? My camera has suddenly stopped working. When I press the red 'shoot' or green 'review' button, all I get on the display is a white screen. Pressing the shutter button does make it shoot, and the zoom and the flash work. I have just taken the card out and examined the jpg files - it is still taking pictures. So it's the display that is busted. I guess my question is: Is it worth the repair bill to get it fixed?


If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Casio EXILIM ZOOM EX-Z850 Digital Camera

Brand-new Canon Powershot SX120 IS and have put in the batteries and card included in the pack. All seems to be working normally - EXCEPT the screen is continually dark and not showing anything the camera is pointing at. Only the standard icons appear on the screen. The flash seems to be working correctly. Have checked through the instruction manual and not sure what I have done wrong - I have literally set it all up by the book and previous camera was a Canon, so it is fairly familiar with sett


I am not sure if this advice will work for your model, but it does work for other Canon models.There is a DISP button on the back. When you push it in, it will turn off the LCD display. Hit it again, and it will keep the display off but ... Canon PowerShot S3 IS Digital Camera

I have cannon power shot a95 camera. when I turned on today the lcd screen was blank and it takes black photoes. Working though as you can review past pictures. Changed the bateries and memory card. Reconfigured memor card also. The icons show on screen. The shutter is opening and the counter is advancing and flash working. please help me. thanks


Call support 1-800-828-4040 and describe your problem to them.They are going to send me a shipping tag for free shipping and will repair the camera for free if the problem is the CCD Image Sensor.Consumer Products Hom ... Digital Cameras

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Turn on camera and screen lights up with an image that seems permanent. Can't get into the menue or anything else. The zoom and picture taking button work but the viewing screen will not change from what looks like an image burned into the viewing screen. I can hear all the normal functions but no change occurs on the screen when trying the differnt options for the camera. Please help. My camera is Power Shot SD400 Digital ElPH. Sincerely


Hi,Please replace the battery to solve this issue. ... Canon Digital Cameras

My d80 with 18 - 135 mm lens often does not work in the automatic mode and the screen shows 'r07'. It works in all the other modes and sometimes even the automatic mode will work. Any suggestions? VM


What focus mode? In AF-S the shutter won't release until focus is acquired.The r07 isn't an error. It's simply telling you how many more pics you can take in burst mode before the buffer fills up. ... Nikon D80 Digital Camera with 18-135mm Lens

Black screen The camara was working fine a couple days ago, but now when i turn the camara on, the lcd screen is black. I can't see anything, hence I can't take pictures. Also, when i take a picture (although screen is black and i can;t actually see what i'm shooting), the picture review shows my past photos in perfect color except for my "test shot". Any suggestions? Thanx.


BUY A CANON, HAVE SAME PROBLEM WITH MY SONY, ... Sony Cyber-Shot DSC-T1 Digital Camera

Screen shows icons but nothing else in any mode. Also will not review or download pictures. Seems to function otherwise (powers up with blue canon screen, lens extends, zoom works, etc then goes to black screen with icons).


... Canon PowerShot A510 Digital Camera

Black Screen When I turn on the camera I get a black screen. When I take a picture a get a black screen. When I review previous pictures taken when the camera was working properly on my computer all the pictures are black. Any idea what the problem is? Scott


Is there no image at all?Or if you look carefully can you see fient images on the screen.If you can then the back light has failed orv a oconnector has come loose.If this is so - then try squeezing the camera body at the base of the ... Pentax Optio S5i Digital Camera

Black Screen The camara was working fine a couple days ago, but now when i turn the camara on, the lcd screen is black. I can't see anything, hence I can't take pictures. Also, when i take a picture (although screen is black and i can;t actually see what i'm shooting), the picture review shows my past photos in perfect color except for my "test shot". Any suggestions? Thanx.


This sounds like it might be a defective CCD imager. If so, Sony should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following link for more info:\015\012 ... Sony Cyber-Shot DSC-T1 Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual


In full manual, yes it should. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2825 seconds