Having problems with your Nikon Digital Cameras ?

Nikon D70s will not format CF card. Have tried different cards with same result. Connected the camera to PC with card installed but PC says no card installed. Is this a firmware problem?

Answers :

Go into your menu and change the USB connection from PTP to Mass Storage, Then connect to PC and try formatting. be sure to use FAT16 and not NTFS.
Repair Help & Product Troubleshooting for Nikon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nikon D70s will not format CF card. Have tried different cards with same result. Connected the camera to PC with card installed but PC says no card installed. Is this a firmware problem?

Go into your menu and change the USB connection from PTP to Mass Storage, Then connect to PC and try formatting. be sure to use FAT16 and not NTFS. ... Nikon Digital Cameras

CF Card I took my cf card out of my camera to be sure I got the right card when purchasing another card. My first card was 1.0 GB and I purchased another, 2.0 GB. I tried inserting the new card tonight and could not get it to go in. I then discovered that I had the card turned the wrong way when installing. I finally realized the way it should go in and got the card installed. Once in the camera, I began getting an error message saying "Err CF - There is a problem with the CF card. - Replace the

You can actually buy a replacement card reader at darntoothysam.com for $21.95. ... Canon EOS-20D Digital Camera with 17-85mm Lens

How can I format the SD card on the PC? I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?

The SD card must be formatted in the camera, not the computer. ... Konica Minolta DiMAGE Xi Digital Camera

Two flash memory cards have pictures on them yet the pc says there is nothing on the cards. i have done a complete uninstall and new install and the problem persists. first time we have ever had an issue with the camera after nearly 10,000 pictures. camera hasn't been dropped. the prongs accepting the flash memory cards are not bent. no new software has been installed recently except bing interface for internet explorer. any suggestions are greatly appreciated. terry

Use a separate card reader. ... Nikon Coolpix 4300 Digital Camera

Media selection With both compact flash and xd memory cards installed at the same time, xd card works fine when selected, however, when selecting compact flash, camera will not take a picture and eventually says their is a write error. compact flash works fine on it's own. Does anyone else have this problem, mind you, it's only a small problem, the camera is really great. Stretch.

Have you tried using a different brand? ... Fuji Finepix S9600 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

SD card I just bought a kingston 8GB card for my camera but it will not recognize the card. Says "Memory card error Please check the card". I have formatted the card on my laptop and it works fine on the laptop. I even copied pictures on it and there was no problem. Is there a firmware update for the camera that I need? Thanks

I have the same camera, save the colour (black). As soon as I read your post, an alarm went off.\015\012I decided to re-check my User Guide (PDF Eng version, page16), for the Lumix DMC-FZ30:\015\012\015\012\015\012\015\012•On this unit, yo ... Panasonic Lumix DMC-FZ30 Digital Camera

I have a casio excilum ex-z100. Recently I downloaded all the photos I had taken on my 4gb SD card to my computer. I now want to transfer the same photos back to the sd card and continue using it in my camera. The problem is that while the photos are now successfully installed on my sd card again (Ican open and view the card contents on my computer) when I put the card back into the camera and try to view them there it says no files are available?

Your computer uses a different writing system than you camera does...therefore, your camera cannot recognize the files your computer wrote to the card. ... Casio Exilim EX-Z100 Digital Camera

Hi there, i have this canon eos 7d camera with the final firmware. also final version of eos utility is installed on my pc. my problem is, when i connect the camera to my pc with a usb cable eos utility can not recognize the camera. when i use a card reader i can see the pics i took with the camra but i need to connect the camera to my pc so i can make timelaps shoots. any idea to solve this problem? thank you.

Have you tried other USB ports on your computer? Also, try these:\012Solution: Windows should automatically recognize your digital camera and prompt you with a list of possible actions, such as viewing the pictures stored on your memory card. ... Canon EOS 7D Digital Camera

I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it ?updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?

... Konica Minolta DiMAGE Xi Digital Camera

I have a nikon coolpix 8800. i have a 6gb card installed. I have the latest firmware. I recently took over 1000 pictures on a trip without downloading any of the photos. Once the picture count got over 1000 the camera would give me a system error 2 each time i took a picture so I had to turn the camera off between each picture. Now even though I have removed all of the pictures it still has the problem. Is there a way for me to remove the firmware and reinstall it and will that solve the p

Try this...go into the menu and try to find an entry for "reset" to get back to factory default settings. Then, assuming you've safely downloaded any pics from the card, insert it into the camera, go into the menu and find "format"....follow the on-s ... Nikon Coolpix 8800 Digital Camera

I have an Olympus tough 3000 wich seems to turn on and off when I try to power it on. the screen goes on and off every second. Not possible to take pictures. (this happens every time unless it have been connected to a computer. read further down) I wondered if a hard reset, installing the firmware once again could solve the problem. I have no problems in connecting the camera to mac computer. It can read whatever that is inside the memory card. If I disconnect the camera after it has been con

Hi,I'm sorry to know that the Camera is turning off and on again. I'll be glad to assist you with this. Please make sure that the battery in the Camera is fully charged and is holding the charge for making the Camera to turn on. You ... Olympus ? Tough 3000 / Stylus Tough 3000 Digital Camera

After Installing new camera card XD 2GB type M+ the Olympus Camera model D-395 only says card error and I would like to know what the problem is

Hi, There could be several reasons for this. Though I am quite confident it is because the camera can only handle a 16mb-512mb card as recommended in the manual. ... Digital Cameras

I can't transfer pictures i have taken on my camera to my laptop, i've installed what seems to be the correct disc and have clicked "camera and memory card" then "browse and download images" yet every time i do so a box pops up saying "no camera found" what am i doing wrong? obviously i have the camera plugged in via usb cable and then switched on so i really have no idea what the problem is. assistance would be nice. thanks, amy.

You could try a different USB port if you have one available but the real solution to your problem is to use a card reader instead of the camera. ... Canon PowerShot A85 Digital Camera

Nikon coolpix s1. Camera displays message : "this card cannot be used" with no memory card. and then no buttons work. With the memory card installed no photos can be save and error: Card cannot be read. I was thinking it might be a firmware problem, I would like some idea before I send it off to be repaired?

Its possible that the internal memory is busted. The solution for this is... Buy a memory card, memory cards are cheap nowadays. If using a memory card still doesn't help. You might want to just get yourself a new camera because you probably wouldn't ... Nikon Coolpix S1 Digital Camera

I recently purchased a replacement memory card and when I install it is says on the screen "check sd card".Does this camera support SDHC memory cards and could that be the problem?

Check to see if the slide switch on the side of the card is unlocked. If so, then format the card in the camera. ... Samsung Digimax S500 Digital Camera

Hello. I'm trying to install my pictures from my camera to computer. I've never had problems in the past, but now it's saying "camera is not recognized". I've tried unplugging the usb cord, turning the camera and computer on and off, reinstalling the program, changing the batteries, putting the memory card directly into the computer (which does not pull up any options or do anything). Please help! Thanks in advance.

Time to start using a card reader for downloads. ... Canon PowerShot A530 Digital Camera

When i put an sd card into my camera it don't work take it out and put it into another camera it says error with card format it put it back in my camera still same problem take it out other camera says same thing again. they can use away with the card when its formated no problems with them

I have had something like this before.. you might just have to reformat the card in a computer to FAT if same problem happens then format it to FAT32 "this deletes everything from the card"if you don't no how to do this please ask me ... Sakar Digital Cameras

My sandisk sd card isn't working in my camera. My camera is a vivitar 5024 camera, everytime I try to take a picture it says memory card is not ready, it says switch to internel ram. This memory card is brand new so what is the problem? No it is not locked i've tried that already, i've tried to figure out what's wrong for a long time now. Does anyone know how to fix this problem? Additional information: The sd card is only 2GB.

Have you tried to format the card.\015\012\015\0121. \015\012Start up a computer with Windows XP, Vista, windows 7or Insert the SD card into an external memory card reader or into the computer's built in card reader. If i ... Vivitar ViviCam 5024 Digital Camera

When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.

... Kodak EasyShare Z740 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"

Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch

You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras

Card problems My camera is not letting me delete bad pics off of my card. We have gone through several cards, while I am a novice at cameras , I am pretty sure this isint supposed to happen. When there is a bad pic I see a grey box with a crooked arrow through the middle. I try to delete them but it wont let me. And now it says my card is full when I know that I have no pictures on it. So I am not sure If I have just bought bad cards or the camera has problems. My card reads : M-8P D3V20 Any hel

In this case I would try to use SMPREP Smartmedia formatting utility on the problem card. Basically I was able to get an older ZIO! Smartmedia reader that supports SMPREP off Ebay for $7 total for a similar situation where I had a couple of useless ... Olympus Camedia D-510 Zoom Digital Camera

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...

Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

I have a fujifilm a235 and have tried 3 SD cards in the camera, the camera says card error to everyone of the cards. I have formatted all the cards in the camera, and the cards work ok in a different camera but cant get the camera to work. This has happened quite a few times with the camera, has spells of working ok and then either has message, card error or read error. I sent the camera back to yourselves last year for this problem and it was returned that no fault was found. The camera did

... FUJIFILM Finepix A235 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5391 seconds