Having problems with your Nikon Digital Cameras ?

D70 will not connect to

\015 Nikon D70 will not connect to computer, recently I left camera on over the week end and the battery went dead I lost photos on San Disk and had to reformat. I took more photos and they are on disk but when I connect to my computer it will not connect.\015

Answers :

I checked all connection and cables and found two issues not related to camera. The USB cable was faulty, replaced and I could connect to computer through F port but the J and I port of the computer continues to not respond and I will need to see what is wrong there.
Repair Help & Product Troubleshooting for Nikon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

D70 will not connect to

I checked all connection and cables and found two issues not related to camera. The USB cable was faulty, replaced and I could connect to computer through F port but the J and I port of the computer continues to not respond and I will need to see wh ... Nikon Digital Cameras

I cannot download my pictures the camera( d70) works it says pc but nothin g happens when I connect using a usb cable

We need more information to help you.\015\012\015\012Did you install the sowtware? Did it come up with any errors when the software was loaded? What operating system are you using? Did it ever work correctly? ... Digital Cameras

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.

I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe

Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

Computer (Windows XP) can't connect to Nikon camera as it used to

Hi bauerlina\015\012\015\012have you tried using control panel (add/remove programs) to uninstall the nikon software then switch off pc for 5-10 seconds,restart an reinstall nikon soft ware ... Nikon D70s Digital Camera

So did you get a fix (d70)

It will be cheaper for you to buy a card reader. My camera would not let me download photos into iphoto.. try to see if you can just drag photos into your computer.. If that is the case change your photo program. ... Nikon D70s Digital Camera

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.

I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

MY Sony CyberShot will not connect to the computer. I've connected it succesfully before and now, when I hooked the cord up and turn the camera on to upload, the camera says "USB Mode Connecting...Switch on to [MENU]" and I tried all three to enable it to connect and it won't.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Sony Cyber-shot DSC-W55 Digital Camera

I connect my Samsung P1200 to my computer and the camera says 'Select USB' and I select 'computer'. It then says 'Connecting Computer'. This is where it gets stuck and does nothing else, doesn't connect to the computer or anything. Any ideas how I can fix this so it will connect?

... Samsung Digital Cameras

Olympus Stylus 770 SW is not seen when connected to a PC or laptop. The camera is off when connected to the PC/Laptop and powered on once the connection is made. Note: This camera has been connected to the PC and laptop previously. This is a new issue with this camera.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or conn ... Olympus Stylus 770 SW Digital Camera

Can't connect to pc through the usb port. I used to be able to connect the camera to any pc by connecting with the cord to an usb port - all I did was connect and switch on the camera and it gave me the option of 'computer' and then it would give me the option to open the files and download onto the pc, but now when i plug it into the usb port and switch the power on the camera just switches on and does not show up in the computer at all so my photo's cannot be downloaded onto my pc

Hi, ... Casio Exilim Pro EX-F1 Digital Camera

No connection between camera and computer, sometimes it connects but won't stay connected long enough to download pics. Its not the wire as it has worked with a different camera. I tried putting the memory card in another camera and using different computer but that didn't work and after taking the memory card out of that camera it no longer will connect either.

Please make sure that "mass storage" is set under connections when your using the memory stick to transfer pictures. ... Sony Cyber-shot DSC-T70 Digital Camera

MY Sony CyberShot will not connect to the computer. I've connected it succesfully before but now when I try to upload my photos the camera says "USB Mode Connecting...Switch on to [MENU]". I tried all 3 but it still wont connect. Sometimes it says "USB Mode Mass Storage"

You've reached the point where you need to start using a separate card reader. ... Sony Cyber-shot DSC-W55 Digital Camera

I am connecting my sony cybershot camera to my pc but it is not read and i lost my installation cd ...when i downloaded the driver from the site there is an error telling me to be sure that the camera is connected and on although i am connecting it and turning it on !!!! my problem is how to make my computer feel that it is connected to my camera ..can you i get help ??

Having gone over two months without a reply to my query, I assume my suggestion to use a card reader solved the problem. ... Sony Cybershot DSCW310 Digital Camera

My camera says 'Connecting to PC' all the time when I turn it on even if it is not connected to PC. I think it has got confused as the last time I used the camera was to take photos off it and it may have run out of charge while connected to the PC. I cannot use the camera as it always has this 'Connecting to PC' message on it.

Connect the camera to your PC. Turn it on. Wait till the PC 'acknowledges' the camera. Then disconnect it via 'remove USB-device safely'-function.If this doesn't work. try resetting the camera with the reset button you'll find under the c ... Nikon D40x Digital Camera

When I try to view images on a tv the connection in the camera does not hold and the image does not stay. When I move the connection to a better connection and hold it the picture will stay if I put pressure on the the camera connection. Canon 30D

... Canon EOS 30D Body Only Digital Camera

Until recently my canon powershot SX10 IS connected just fine to my mac. Now when I connect it to turn it on the camera says connection error. I have tried two connection cords. Do I need to take my camera in for a repair?

Try using a card reader to download your pics to a folder you create on your desktop. ... Canon PowerShot SX10 IS Digital Camera

I have a canon power shot SD600 (around 3 years old now). When I go to download my photos on the computer it tells me (the computer) that it 'can not detect a camera connection' and to check the connection. The connection is definitely in properly but the connection button on the camera does not light up in blue (as it usually does). The battery is fully charged and can not find anything in the manuals provided regarding this failure. cheers, Maura

... Digital Cameras

I am trying to find the schematics for the main board for my Panasonic Lumix tz-5 camera. When I try to turn it on it says that it is "Connecting to USB" even though it is not connected. I have taken it apart a couple times to see if there is any corrosion on the usb connection or on the chip that the usb connects to. If I had a schematic of the main board I could possibly follow the circuitry and trouble shot it. If I could find the replacement boards and they were cheap enough I could also rep

Go into the camera menu and find "reset"...follow the on-screen instructions.(although since you've taken the camera apart a couple of times, I'm not sure anything will work as a fix). Also, remove the card and battery...press all the buttons...leave ... Panasonic Lumix DMC-TZ50 Digital Camera

I have D-link DSC-350F, when I connect with my computer, camera display PC,While PC said camera not found may be USB cable not connected properly, but its already connected thats way, camera display PC, its mean its connected,please help me to solve this problem for use my camera. my operating system is windos Vista

Solve all your problems by using a card reader. ... Digital Cameras

The thing is that it doesn't connect to the pc. I am using windows xp and followed every instruction to make the connection... But when i get connected whith the usb cable the computer does not recognice the Camcorder FS200. Also i have allready put the serial number in the computer... What can i do to get connected?

Use a card reader instead of the camera. ... Digital Cameras

I have a Panasonic DMC-FX30 camera and an iMac.  The last time I connected the camera to the mac the pictures showed up like usual.  However, I think I disconnected the camera from the mac without dragging the no name icon to the trash.  Now when I connect the camera to the mac, the camera displays the connecting image, but the no name icon does not appear and the pictures do not show up on the mac.

Download the drivers and software to the camera again then restart mac It should work now! Have a good day! ... Panasonic Lumix DMC-TZ1 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!

Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

Connection I connected my camera to the computer and it says that it "cannot detect camera fix connection to camera then try again

There could be a number of problems...\015\012\015\012Your USB cord is faulty\015\012\015\012A problem with your memory cardIf replacing the cord won't work ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Camera connection my image browser is saying no camera found when the camera is connected to the computer. have turned off computer, changed connectors and still no connection

One thing you may want to check on is whether or not your XT is set to PC Connection Mode. Set your mode dial to (M)anual, press your camera's Menu button and tab over to the fifth tab (Setup Menu 2) and then down to the COMMUNICATION menu selection. ... Canon Rebel XT / EOS 350D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0665 seconds