Having problems with your Norcent Technologies Xias DCS-760 Digital Camera ?

Drop camera now it dont work

\015 I drop my camera while it was on, the the lens that pops out when you turn it on is stuck open and will not close,when you press the turn off & on button it just buzz but nothing happens , any ideals or where can i have it fix thanks\015

Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Norcent Technologies Xias DCS-760 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troubelshooting hi, i was taking some pics today everything was fine till my son dropped it we have rugs, but now the lens is out dont turn on, dont do anything. i tried changing the batteries but it didnt work. what you think happened and if it has a solution. please help me.


When digicams are dropped most problems occur because some cables or wiring connections got loose. try taking it to a camera specialist to have it checked because if you open it yourself it might cause more damage. ... Sony Cyber-shot DSC-W80 Digital Camera

Omgggg help me please im gonna die for this kodak camra ok well i was in borders book store and my friend wanted to see my red kodak easyshare m853 and as i was handing it too her we dropped it when the lens was extended and for the first 2 min after dropping it it worked fine i jus picked it up and went on than like 5 min later it said lens error 1,22,1,0,0 or something like that help other people said force the lens back in but when i try i can see the screen going to pop open and i dont wanna


Please don't die. Unfortunantly this fault needs to be repaired.\015\012\015\012Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012\015\012An Out of Warranty repair for this model fo ... Kodak EasyShare M853 Digital Camera

Drop camera now it dont work


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Norcent Technologies Xias DCS-760 Digital Camera

Samsung kenox Digimax v3 photos have a very blue hue in easy mode. It was working fine for 2 years then one day I went to use it and now all the photos come out with a blue hue and very grainy. I havnt dropped it, I dont understand. Is there a way of reseting the software


... Samsung Digimax V3 Digital Camera

Lens stuck! hey,today,when i uploaded the pics from my camera,it worked fine.But then,when I was taking a picture,the lens were stuck out,and the screen was turned off. I replaced the batteries,but it doesnt work.I dont drop it or something.Please help me,or you know where fix it and how much does it cost?Thanks alot!


I had a similar problem and I tried all the various combinations of resetting the camera, charging the batteries, plugging in the USB cable etc. After a week or so I powered it off and rapped it against my desk once or twice. Once I turned it back on ... Digital Cameras

Black Screen ive got a black screen when i take pictures; everything else on the camera works. the menu's pop up; the pictures ive taken show on review. but the actual view doesnt show anything and is completely black so whenever i take a picture its just all black. i just got this camera for christmas and it hasnt been dropped or exposed to liquid. it doesnt show a lens error number either; because i dont even think it knows it has one.. its just black though.


I have the exact problem. I came on slowly, some days it would work, some days it wouldnt. Finally i couldnt get it working at all. Sent it back to Kodak as it was still under warranty, the repair center claims it was "physical damage". They admit th ... Kodak Easyshare M753 Digital Camera

Kodak easy share z1285. the batteries dont last past 10 pictures. it used to take 100+. i am still using the same type of batteries now as i was using when it worked fine. ive had the camera since april and by july it was taking a downward spiral fast. please help. its never been dropped or got wet. ive looked online and everyone who has this camera wishes they never bought it. its the same for everyone. i just want to know can it be fixed or do i toss it in the trash. thanks josh


... Kodak EASYSHARE Z1285 Digital Camera

Eek, i dropped my camera more times than i can count, and hanging around a bunch of rowdy skaters seemed to really do it in. we've dropped it so hard the screen cracked, but it was still working fine. after awhile the crack started collecting dust [ew]. and now this last time, the focusy thing was open when i dropped it and it now refuses to work. i've lost the box and recipt and everything, so i doubt if anyone would replace it, even if i did do the whole 'pay more than your camera's actually w


Non - motorized lens cameras , will survive\015\012\015\012more drops ( ebay it - as is - for parts ) ; ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Blank Screen Well my cameras screen is blank when i try to take pictures it doesnt work all of it is blank it take pictures but when i look at the pictures all of it is blank i love my camera but i dont know what to do i need help...and fast!! The shutter works fine..everything works fine but i dont know what up wit my screen i need help please somebody help me!!


Ok casio luver you have eather a broke lcd or a damaged main board. visit www.digitalcamrepair.com for more help. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on  & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!


Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera

My Canon A430 Camera got a bit wet when I fell into a Dam this weekend. The camera did not at all touch the water, but a few drops of water did land on the camera. After drying the few drops off, the camera still worked for the whole day as well as the whole evening, but the next morning the camera did not work. The green light above the screen on the top left does flikker when the camera is turned on (which is normal). I am even able to take a photo and the flash works. Through all of the the s


Apparently, Some water worked its way into the camera circuitry. You need to stop trying to get it to work...you're only making things worse. Remove the card and battery. Bury the camera in a bowl of dry rice for a few days to absorb any moisture. ... Canon PowerShot A430 Digital Camera

Fe-230 keys dont work


Sounds like the batteries need to be replaced if its working when connected to the PC. ... Olympus FE-230 Digital Camera

Canon SD600 wont turn on???? Changed battery and still dont work


... Canon PowerShot SD600 Digital Camera

Dropped camera I dropped my optio s40 and it was on lens out. Now it says battery depleted..everything works except camera mode. the microphone works and I can also see my pictures...What do I do???


Try "packing" it like a deck of cards or a pack of ciggs. this will cause it to resync itself with the lens.\015\012\015\012you might have to send it in for repair if the lens circuit is off. ... Sony Cyber-shot DSC-W50 Digital Camera

What can i do if my ixus 55 has been dropped on the ground and it can't work? i mean, i accidentally dropped it on the ground and after that, it could not be turned on again. i tried every thing. how can i get it to work again?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon Powershot SD450 / IXUS 55 Digital Camera

Dropped it! Hi, I dropped it with the lens extended. Now i get the message "System Error" - the lens won't retract, nor does the shoot button work - everything else seems to work.


Don't take it apart yourself, unless you have spent time repairing camera lenses. The tabs that fit into the grooves for the Focus and telescoping mechanism have popped loose from the grooves. This means the lens assembly must be either repaired or r ... Nikon Coolpix 775 Digital Camera

Dropped my camera, dont have acamera view on display anymore


... Digital Cameras

My charger jus stoped working i dont see any damage or anything worng but i wont work ive tried other chargers but they dont charge my camera how do i get a new charger?


I would search ebay or amazon.com (or just google) for one made for your camera, not a generic. ... Jazz DV-179 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

Canon G12 buttons dont work zoom dos'nt work can take a photo but that it


... Canon G12 Digital Camera

Kodak m893IS is not turning on....the camera was dropped by accident but it wasn't dropped from high it was only like 2 feet...after it was dropped it worked fine for the next 5 minutes but then it turned of but the camera was already on low battery when it was dropped so i didn't think anything was wrong untill i charged it....i kept it on the cord for about 45 minutes and well the kodak logo comes up but then the screen looks navy blue then it turns off again completely. does anyone know what


You may have bent the camera's lens housing, which will require professional repair, but the problem you describe is frequently due to\015\012corroded battery contacts inside the camera. Remove the batteries and\015\012wipe the camera contacts firml ... Kodak Easyshare M893 Digital Camera

Hello there, My Samsung ES55 recently stopped working completely (not turning on) for no apparent reason. I had been taking lots of photos, 153 to be exact, and then it just didn't work. It was still under warranty and when I got it back from the camera shop, they told me it had been dropped - which it hadn't - and whilst it was now working, they would guaruntee it any more. Now the camera works but the images are often blurred. I think it might be an auto-focus problem. When I try and tak


There may be a fault requiring service (probably not economically viable if they won't do it under warranty), but before you go there, does this camera have a "Macro" feature? This is usually represented by an icon that looks like a flower. If you ha ... Digital Cameras

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

My Pentax Optio A20 camera display doesn't show true colors, they now have a red-orange tint. It was dropped on the grass yesterday. When I play back the pictures, all of them show up as red-orange on the display, the ones I took before it was dropped and after it was dropped. Everything else works fine on the camera. My brother-in-law says that there may be a reset button to restore factory settings.


It sounds like you may have a broken display. It is possible that it is the main board, but much more likely that it is the LCD display. I can fix this for $40, not matter if it is the display, or the main board. Or you can send it to Pentax in A ... Pentax Optio A20 Digital Camera

My Kodak EasyShare C875's flash isn't working and I have no idea why? It was working fine one day, then I flew on a plane (could this do something to it?) and now it's not working. It hasn't been dropped or damaged in any way.


... Kodak EasyShare C875 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1198 seconds