Having problems with your Olympus Camedia C-350 Digital Camera ?

I have been downloading my pictures from my camera as described in SP-550UZ manual with absolutely no problem. Its been about two months and today I tried and it does nothing! I opened OLYMPUS MASTER 2 and tried to down load as found in the browser bar. Its says not connected to the camera. Batteries are new and camera works. What is wrong? Barbara Savoia [email protected]


Answers :

Blame Microsoft updates. Use a card reader to download your pics to a folder you create on your desktop.
Repair Help & Product Troubleshooting for Olympus Camedia C-350 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have been downloading my pictures from my camera as described in SP-550UZ manual with absolutely no problem. Its been about two months and today I tried and it does nothing! I opened OLYMPUS MASTER 2 and tried to down load as found in the browser bar. Its says not connected to the camera. Batteries are new and camera works. What is wrong? Barbara Savoia [email protected]


Blame Microsoft updates. Use a card reader to download your pics to a folder you create on your desktop. ... Olympus Camedia C-350 Digital Camera

I have a new Dell computer using Windows 7 andd have installed software Camedia Master 4.1 for my C-740 camera. The master page can be accessed but when I try to download photos from camera using the USB cable a message comes up saying that an Olympus camera could not be found on a USB! .....Thanks


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Olympus Camedia C-740 Ultra Zoom Digital Camera

I recently purchased a new computer with windows 7. I loaded my software for my olympus FE-130 camera, however when I try to download my pictures to my computer I keep getting the message no images found on camera, ,make sure camera is connected to a USB port. The camera is connected to a USB port.


You may have to use a separate card reader to download your pics. ... Olympus FE-130 Digital Camera

I put the software disc into my computer,and it started to download.not all the items were downloaded,and when I plugged in the usb cable from the computer to the camera and turned on the camera the message new hardware found did not appear.I uninstalled the three items to try and install them over again,and now when I put the disc in my computer it will not load at all.what can I do?


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Polaroid i733LP Digital Camera

My computer does not reconize my camera when I try to down load pictures with my zoom browser. The camera is a Canon PowerShot SD450 Digitial Elph


You need to install the drivers for your camcorder, before you conncet your camcorder to your PC.The drivers are in the CD which ... Canon Powershot SD450 / IXUS 55 Digital Camera

I loaded Olympus Master software on a new laptop. The computer/software does not recognize camera when I try to download pictures.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Olympus Stylus 740 Digital Camera

Have loaded software, connect s90 to compter using usb lead, Computer dings to say found new hardware but unable to connect with wizard and al;so zoom browser cannot detect camera


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S90 Digital Camera

When I try to load pictures from the DSC-W50 camera to my PC, it says : file BOAKaa.EXE cannot be found. I do not have the CD-ROM for Cyber shot Application Software. If the solution is available free of cost,pl let me know.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Sony Cyber-shot DSC-W50 Digital Camera

I tried to donwload some pictures to my PC. It was working fine a few days ago, now I can't copy the latest Foto's. There are on the camera to see but won't let me down load it. I get a meesage on my PC saying that files or pictures can't be found. can you help?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Praktica SlimPix Digital Camera

When downloading Presto! VideoWorks I got an error. "Error at loading of ippIP library No DLLs were found in the waterfall procedure" When I try to access video/pictures it says the device is not connected. As well as these problems on the camera screen once plugged into the computer does not recognize that there is a memory card present though in the user's manual it said it would. How do I get my videos/pictures?


... Digital Cameras

My pc crashed last summer and it's been repaired and softeware re-loaded. Now when I try to download photos I get a message that "no camera found" What should I do now?


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Canon EOS Digital Rebel XTI Digital Camera

My camera Hello, my name is Amber. I just bought a FE-230 OLYMPUS digital camera from this guy on craigslist. It is in perfect condition, no scratches no drops and it worked perfectly fine today when he sold it to me. We turned it on together and took a picture and I was taking pictures all night with it, then I came home and tried to load the pictures on the computer, I took out my memory card and then put it back in, and then tried to plug a cord in my camera to see if it would load, and it di


Check the battery to make sure it is making good connection ... Olympus FE-230 Digital Camera

When i try to load photos from my Fuji Camera using the installed software provided (finepixviewer), I select ''load photos'' then, ''from camera'' only to be taken back to the previous menu where i have to select ''load photos'' again. The camera is switched on, plugged in properly AND recognised yet i simply cannot make any progress beyond ''load photos from camera'' can anybody help me?


Just dont use their provided drivers or software. If youre on the Internet and using windows 7 you will always be updated enough for your camera of any brand can download and even altar content to a file on your computer. ... Digital Cameras

I am having trouble with two Canon camera's, so I have a question already posted about my Digital video camera, but this is related. When I installed the software for my Video camera, it came with an Image Browser. I find that the original Image Browser installed on my computer has now changed and opens up like the one installed for the video camera. I downloaded three pictures from my S410 Elph and they came up on the Image Browser window. When I was trying to figure out how this n


To ensure the new Image Browser is closed properly, restart the computer.\015\012\015\012Then, go to Start > Control Panel > Remove Programs (or similar), and let me know how many Image Browser programs you can see in there.\0 ... Digital Cameras

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.


SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras

Hi. My Fujifilm Finepixd S1800 camera has been acting up lately. When I try to take a picture, the camera takes several seconds to actually take it, the top light blinks yellow. I have brand new batteries in and they are all positioned correctly. Also, when I try to access my pictures, it has a loading screen but does not load. Please help as soon as possible. Thank you.


Your camera takes a sizable image which could be part of the problem loading it to the card it takes a long second or two. You also may be using a shooting mode that requires a long shutter speed and have the "noise reduction" activated in this case ... Fuji FinePix S7000 Digital Camera

Hi I have a Fujifil finepix j10 camera and am trying to download pics from my camera to my pc for the first time. However it is taking ages to load them, it says it should only take around a minute but they just dont seem to be loading. Ive tried re-installing the software but its not helped.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Fuji FinePix J10 Digital Camera

For no apparent reason, my GE A835 camera failed to upload photos. I tried everything I could think off to fix the problem but get stonewalled by windows vista telling me that this camera doesn't exist on my system. The camera never came with an installation disc as it was a plug and play device. I tried to find an official GE website from where I could download the driver but, alas, no luck. Can you help me please? I have a load of photos on the camera which I would like to get onto my compu


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... General Electric A835 Digital Camera

My zoombrowser program will not recognize when my camera is attached to the computer with the supplied cord. The computer recognizes that a camera is found, but will not let the program recognize it. Lately, I've also been getting the note: invalid class string. Then I have to uninstall the complete canon program and install it all over again. Then the program works, but still says no camera found. And, the camera is set in the mode to load to the program.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A95 Digital Camera

Canon powershot sd 890 will not load photos after installing Norton 360 from comcast. Comcast says that Norton can NOT cause a problem with camera photo loads even though I see that other people have the same problem. I get a ding ding sound, no pop up for me to select photo load option. I even went to explorer and tried to manual connect camera that way and no luck. UGH!!!


Solve your problem by getting a card reader. ... Canon PowerShot SD890 IS Digital Camera

I have a Panasonic NV-DS5 digital video camera. Whenever it tries to load a tape it displays an error code "F 01" on the screen. I've tried several tapes and they're all good quality. I assume it needs repairing and I'm trying to find a service centre in the UK that I can send the camera to be repaired.


Hello,Try removing ur batteries and press power button for few seconds and put ur batteries back and try switching on ... ... Panasonic Digital Cameras

Hello, I have Sony DCR-SX30 digital camera and it's write-protected. I need to remove write protection and I have tried these: formated on my camera and now it's clean, but when I tried to format from my pc I get the same error "the disk is write-protected...." search lock but not found if I take my sandisk (8gb) out nothing happen I get the same error "The disk is write-protected. Remove the write-protection or use another disk." also tried editing registry and setting write protection c


Theres a tiny switch on the sd card that locks and unlocks it all you have to do is click the swith back to unlock haha i had the same problem before ... Olympus FE-340 Digital Camera

I have a canon powershot A40. I've attached the camera via a USB port to my PC. I am trying to use Zoom Browser EX to import pictures to the PC, but am receiving a message that the camera does not work with Zoom Browser. It used to, so I don't know what could have changed. Any ideas? (I also have a Powershot A610 that works just fine with Zoom Browser.) Thanks


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A40 Digital Camera

Pictures are not loaded to my Mac/PC I am unable to load the pictures from the memory card my new TZ10. I have loaded pictures from the card once and then all functioned well on my Powerbook. This time I have tried both Mac and PC with no luck on either of them. All the pictures are visible on the cameras screen. And yes, the function wheel on top of the camera has been in the right position.


First of all, always remember to "eject" your equipment on a Mac and use "safely remove hardware" on a PC when you disconnect to avoid corrupting the camera. To avoid problems in the future, do what the pros do...use a separate card reader like the o ... Panasonic DMCZS7DMCTZ10 Digital Camera

I have a sony t70 digital camera, and it takes great pictures, but I can not load pictures that I took a while back. If I go take pictures say today I can load them on my computer with no problem. I guess what I am trying to say is how do I do a load all from my camera to my computer. I downloaded the lastest software last night and fooled with it and could not find a solution. Your help would be greatly appreciated. Thanks Gary [email protected]


If you still have those on your memory of the camera ..or sd memory card (if you use one ) ...you should find the camera just with the driver into the My computer folder .named just like the camera . or named removable device or storage device ... ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5858 seconds