Having problems with your Olympus Camedia C-350 Digital Camera ?

Lens opens when shutter slide is activated then goes back immedia

\015 The lens opens when slide is activated but withdraws immediately. battery has been fully charged\015

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus Camedia C-350 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens opens when shutter slide is activated then goes back immedia

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus Camedia C-350 Digital Camera

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!

The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

When pressing the power button, the shutter opens, the lens comes out, the screen comes on for about 2 seconds. Then the screen turns off, the lens goes back in, but the shutter stays open. I let someone use it and this is the condition it was returned in. I'm not sure if it was dropped or anything, but I don't see any external damage.

Look closely for sand particles that may be lodged around the gaps of the lens barrel. Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or th ... Kodak Easyshare C182 12MP Digital Camera

When i turn on my Kodak easyshare 8.2 the lens comes out the shutter opens and then immediately closes and the lens goes back in. what is wrong?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare One Digital Camera

Lens Error I fell while holding my camera. The lens was open at the time and when I got up I turned the camera off. I then turned it back on to check it and the lens opened and immediately closed with the "lens error" on the screen. I can turn it off and on and the lens will always open but closes as soon as it has opened with the lens error on the screen. The shutter opens but closes also, like the lens. Can this be fixed? It was a gift so I don't have the bill of sale but I still have the orig

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX L4 Digital Camera

Lens Error! We have a Nikon Coolpix S6. When attempting to turn on, the camera buzzes. Afterward, the screen shows what the lens is pointing at, but then it goes white and the words, "Lens Error" appears. I can't find the manual to pinpoint the problem. Also, when the camera is turned off, the lens cover stays open, and only goes back when the bateries are taken out and put back in. Please help quickly, this is a school camera, and it is needed for a large scale progect. (yearbook). We h

I know this is really late, but I've been having the same problem with the S6 on and off for the whole year, and I suspected a loose part.\015\012\015\012For a whole week, I couldn't turn on my camera, and the lens cap doesn't close until five minute ... Nikon COOLPIX S6 Digital Camera

I have small SONY DIGITAL CAMERA DSCW90S,when you turn it on the lens barral slide open, then closes then slides open then closes, the lens shutter keep nicely opening and closing but the barral is not stable keeps oppening and clossing for couple of times and then it says TURN THE POWER OFF AND ON AGAIN, but when i do so, it doesnt help. please help me, thank you :) Alena Lorinczova, DUBAI, UAE

... Sony Digital Cameras

My powershot s80 lens cover does not slide back, as if it stuck, any suggestions? I tried to slide back the lens cover to activate the camera but the cover does not move at all. It moves only 1mm back and forth. It does'nt seem to be broken or something like that, just stuck, as if a lever does not operate and block the cover. Thanks in advance, Panagiotis

Hi\015\012\015\012 \015\012\015\012Thanks for using FixYa. To start with try to blow\015\012compressed air around the lens cover so that if there is any dirt it cleans if\015\012off. You can also s ... Canon PowerShot S80 Digital Camera

Lens stuck open - goes half way back in and then comes out again - goes fully back in when plugged into computer no screen at all apart from the occasional lens error 315 message or date format setting when inserting new batteries

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Easyshare CD82 Digital Camera

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!

I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

When you press the power button the lens open out but the lens cover stays closed, and when you power down the lens goes back in but the lens cover stays open but you can gently push the lens in the last 1/16" and the lens cover will close.

Hi,\015\012\015\012Unfortunately this model is a camera that suffers seriously with both power issues and lens problems. It's a well known issue with this camera and it suffers notoriously from a slow and unadjustable shutter even when it ... Pentax Optio E10 Digital Camera

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int

Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card

... Canon SD4000 IS IXUS 300 HS Digital Camera

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

The lens on my sd600 won't open when I turn the camera to picture taking position. Screen goes black and message says ''lens error, restart camera''. I have to go back to view mode and then turn camera off and on again in order for partially opened lens to retract fully and close.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD600 Digital Camera

My son pulled out one of the shutters that opens and closes over the lens. The shutters no longer open all the way. The camera is brand new. How can I fix the rest of the shutters? Should I pull them all out? Or bend the one that is pulled out back in ? Thanks

You can pull off the other one if you want. To put it back in your basically going to have to take apart the camera. The "Shutters" on the outside is nothing more but to protect the lens will its in the camera. The actual shutter is inside the lens t ... Fuji J150w Digital Camera

Hi, i dropped my a560 the other day and the end part of the lens bent a little but i managed to put it back in its original form. however when i press the power button the lenses whirrs and tries to open but goes back in and on the screen it says 'lens error restart camera'. Its my friends camera and i dont want to give it back her in two pieces. please help thank you

Sounds like when you dropped it it damage the gears in the camera that make the lens not work properly , you may want to take it and get it fix by the maker of the camera sorry. ... Canon PowerShot A560 Digital Camera

I slipped while hiking and sat on my Canon PowerShot SC 210 IS which was in my back pocket (dumb). The shutter cover now does not fully close nor open. I can move it open with my finger, but it will not close fully. There is a visible dent in the rim around the lens cover shutter thingy. Am I screwed?

HiNo, yours is not screwed if any other camera function work.I would like to help you. Could you photo the dent area and post here. After that I can help you. ... Digital Cameras

MJU 300 Hello my partners MJU 300 camera has developed a fault where when the shutter slide is opened it starts as normal the lens extends the lcd starts then allmost imediately the lens retracts. if it does stay out/on as soon as you take a photo it retracts & shuts down. i have tried a different battery same thing happens. so in my wisdom i decided to remove the shutter slider cover in the hope of finding some fluff on a switch but unfortunately it has only worsened the problem now the camera

Sean \015\012\015\012 Sorry about this but Olympus charge \302\243100 flat rate for all repairs- costly i thought. however i opted for buying a replacement from Ebay \302\24330 as good as new. seems a real waste but looks like olympus run an almost d ... Olympus MJU 300 Digital Camera

My camera turns on and shuts off right away, the lens comes outand the screen does it's opening casio thing and the green light is flashing then all of a sudden the screen goes black and the lens goes back in, i fully charged the battery and still get the same thing happening!

... Casio Exilim Card EX-S100 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b

... Canon EOS 40D Digital Camera

When the lens is closed...my camera still works just fine. But when I try to open the lens...it comes 1/2 out, then goes back in. It makes a funny noise like it's having trouble when the lens comes out the little bit it does. What can i do? Can it be fixed easily? Olympus d-550

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia D-550 Zoom Digital Camera

On my PENTAX Optio Z10, the slide shutter cover came loose, it slides left and right to open and close. I didn't lose any parts but I can't slide it back on. I currently have a rubber band holding it together. How can I get it fixed, I like the camera, it takes wonderful pictures. Unfortunately I have had it for more than a year. There aren't any camera repair stores in our area any longer. Don Wicks

Heres where your going to have to compromise or try to reach the company to see if they will repair it. Is it essentiel to you to have the factory cover? If not you could most likely make a cover out of shrink wrap or aluminum foil or you could put y ... Pentax Optio Z10 Digital Camera

My camera fell face first and although i did not damage the lens the tip of the lens area was sunk in now 1/2 the lens shutter works the other 1/2 does not close nor opens it just falls back when i tilt the camera to one side or use it backwards. can i get this fixed? or what can be the best solution?

Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012An Out of Warranty repair for this model for this fault is about 48 pounds + shipping. KODAK also offers a Trade up option where you will have the op ... Kodak EasyShare C613 Digital Camera

My camera turns on by itself even with the slide in front in the closed position. The screen then shows the warning that the lens cover is closed. When I open and reclose the lens cover in 10 or so seconds the camera turns itself back on and repeats with the lens cover closed warning. The only way for me to turn the camera off at this point is to remove the battery. Help!

Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera wil ... Sony Cyber-shot DSC-T77 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2996 seconds