Having problems with your Olympus Camedia C-5050 Zoom Digital Camera ?

What settings do I use to take a photo using the remote control unit?

\015 How do I take a photo using the remote control with my Olympus c-5050?\015

Answers :

On page 110 of your advanced user manual explains how to set up the camera for remote control shooting.
Repair Help & Product Troubleshooting for Olympus Camedia C-5050 Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What settings do I use to take a photo using the remote control unit?


On page 110 of your advanced user manual explains how to set up the camera for remote control shooting. ... Olympus Camedia C-5050 Zoom Digital Camera

I HAVE A NIKON SB-800 FLASH UNIT AND I WAS TAKING PHOTOS OF RACECARS AND SOMEONE ELSE THERE HAD FLASH UNITS SET UP ON BOTH SIDES OF THE RACE TRACK WITH REMOTES, AND NOW MY FLASH WONT LIGHT UP AND THE SCREEN READS MRPT A RPT AND UNDER THAT IS BRPT CRPT AND OVER TO THE RIGHT SIDE IT READS CH4 STBY 80 AND BELOW IS F11 XM ZOOM 14MM WHAT DO I NEED TO DO TO CANCEL THIS SETTING AND GET BACK TO MY REGULAR SETTING AND HAVE


Hey ljthomp6_30,\015\012 I would just reset the flash back to the manufacturers default setting, which is done by pressing the mode button and the on/off button simultaneously for about 2 seconds. Keep in mind this wi ... Digital Cameras

I am having trouble using the hahnel pro remote control it flashes and every thing but it doesnt take a picture is there a setting on my camera that i have to set


... Canon EOS 5D Mark II Digital Camera with 24-105mm lens

HI,I hav a Nikon D40x camera. When I use the remote control to take pivtures it only stays in that mode for about 10 seconds before ending. How can I alter this to keep it on that setting for longer?


You are being timed out as the default setting is 10 seconds.Enter your setup menu (looks like a pencil) and scroll through to " Remote On Duration ".... now change this to 15 minutes and ok.Job done.Remember to reset the menu once ... Nikon D40x Digital Camera

I was having troubles with my Nikon D2H as in it wouldn't take a picture. I then realized my memory card was full so I deleted a few photos and it worked fine. This afternoon I deleted all the photos from the memory card and now it's having the problem of not taking photos again. I played around a bit with the settings, but it will only take 5 to 10 photos before no it stops taking photos. It used to hold 100+ with the memory card I have. Help?


You and a few million others all delete their pictures from the memory card when you should be formatting. Formatting cleans the memory card surface of all data and makes it ready to accept new image/data. You said that the card used to hold over 100 ... Nikon Digital Cameras

LCD screen I am using my sisters camera over the next two weeks and cant figure out how to get the lcd screen to work while i am taking a photo. It is fine to review the photo and takes photos fine but i can see what i am taking the photo of unless i look through the eye piece. I cant get hold of her for the next two weeks and i dont have the manual can anyone help? Is there a button or setting i have to put it on?


Unfortunately it is not possible to preview the picture on the camera's LCD screen before you take it.The 300D is an SLR camera. What this means is that as light comes in through the lens it is deflected by a mirror (which sits in front o ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u


Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

Long Photo-Taking Hello, I have an S400 with a pretty fast memory card... It seems like its taking a longer time to take a photo than it used to? I dont know If i changed any settings that may be slowing this down. Basicly I turnt he camera on and sometimes I have to hold the capture button down for 3-5seconds before it will actualy snap the photo, Any suggestions??? I'm prety sure it hasnt always been this slow.. I got a new battery etc.. Thanks!


Most cameras take a little longer to capture the photo in darker conditions, with a moving subject, things like that, though if the photos you're taking now are under the same conditions as the ones you used to that shouldn't be the issue. Have you f ... Canon PowerShot S400 / IXUS 400 Digital Camera

I have had a nikon D60 for the last 3 years.I normally use the auto setting and for the first 2 years it took beautiful photos almost every time. in the last year or so when i try to take a photo it often displays iso auto r 09 in the bottom right hand corner and won't take the photo and this doesn't appear to depend on lighting. Is there something i can do differently? Should i take the camera for a service? Thanks


Hi,You should review your camera manual. Here's a link to it.First, the "Auto ISO" message is simply informing you th ... Nikon D60 Digital Camera

I take photos with the color pix s210 outside with natural light and the photos come out good, but when I am inside using artificial light the photos come out fuzzy. Is there a setting I can use to correct this issue?


In darker settings your chip will imitate a slower film speed.  The aperture will remain open longer (than it would in bright light) to allow enough light in to the light sensitive chip.  Small movements of your subjects would show as fuzzi ... Digital Cameras

I was given an old sony fd200 digital camera (that takes the old floppy discs!) to use momentarily until I get a new camera - BUT it doesn't have a manual. I used it years ago but its been awhile. There are just a couple basic questions still - #1 The photo size is set for around 1250 and I think I need it smaller to put photos onto ebay - so how do I go in and change the photo size to smaller? #2 I feel stupid but how do I turn off the flash when I want to? I messed around with the came


... Sony Mavica MVC-FD200 Digital Camera

With camera on the AUTO setting, I can't seem to take clear, focused photos. Nearly all of them are out of focus or blurry. Does not matter if it is in the day time or at night. Also, when using the ZOOM function the photos are mostly out of focus. What can I try to take clear photos again? Thank you.


Try resetting your camera back to factory defaults. Press the MENU button, select the middle tools tab and scroll down to RESET ALL. Press SET, select OK and press SET. Hope this helps. ... Canon PowerShot S5 IS Digital Camera

Hi i am using a Nikon N75 to take pictures for my photo class, and the instructor wants us to take low light indoor phtotos at a shutter speed of 1/30 at f2.2. However, when i go to set these settings in manual mode the camera will not let me set my aperture to 2.2 it usually stops at 4 and there is no way i can make it 2.2. i didn't know if there is a limitation on the camera but it seems like i should be able to select what i want.


It's probably a limitation of your lens. You didn't say what lens you're using, but one of the common kit lenses sold with the N75 only goes to f/3.3 at best. If you had a lens that opens up more, the camera will let you use it.The differ ... Nikon Digital Cameras

Hi, I purchased a Nikon Coolpix P80 digital camera, its a beaut camera to use but I appear to have issues with it. When taking a photo and viewing it at 100% I find the quality of the picture is not clear, its very grainy. Is the issue with myself as I do tend to have alittle camera shake. Is there too much noise is my ISO too high as its set at 200. How do I take a good photo.


I recomend you to use ISO64 for it shoots a good picture than ISO200 above. it is normal for us to shake our hands a little while taking pictures but the cam still can get a sharp image. if you VR is turned off it can produce shots with a shaky resul ... Nikon Digital Cameras

I live in the Florida Keys and going to try and take some photos of the supper moon tonight. What settings do you suggest for a Sony SLT-A55V. I tried to use my longer lens last night without a tripod and could not get any detail just a white globe. I will us my 55mm-58mm lens tonight. Can you suggest what settings to use and filters to try. Thank you. Karen Szol [email protected]


Take you camera off the automatic exposure setting. Left to itself, the camera will try to make the black sky a middle gray. You want to treat the moon as a landscape under noon sun. If you think about it, that's all it is. The moon is simply a large ... Digital Cameras

Casio EX -Z600 Suddenly takes photo which appears White on screen. Occasionaly takes normal photo and more often than not shots taken indoors appear normall.. Using Snapshot setting


The camera is set to have the ISO (light sensitivity toward the camera) to be manual. The ISO is too high (above 400).You have to accommodate the ISO, or diaphragm (closing) of the camera\015\012to let in less light, and the picture is no ... Casio Digital Cameras

I have turned camera on and set up to take a photo and the shutter release button will not press in to take the photo. I used the camera yesterday and it worked fine!


Turn the camera on and look into the view finder while you try to press the shutter button. Check the information in the view finder to see whether you are getting an error message. If you see an error message in the view finder, remove the lens cap ... Nikon D40x Digital Camera

I can take digital photos that are on the sd card but I am not able to get my pc to download or reconise the Canon Powershot. I can not download photos! It used to go into download mode as soon as I plugged the camera inot the pc by using the digital port on back of camera and usb port on pc. What can I do. I have reset the camera setting back to factory with no success. I have Windows xp.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S1 IS Digital Camera

Camera won't show the image on the screen when taking the pictures. I have to use the small view finder to take photos. No image on the display until the photo is taken. How do you sqitch it back to the display set up ?


You don't. The D40 works as SLRs have worked for half a century. Only more recent dSLRs (Nikon started with the D3 and D300) have the LiveView capability that lets you handle your dSLR as a point&shoot. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I am a freelance writer. I have a Canon PowerShot A1000IS that I use to take photos to go along with articles I write for the local paper. Recently almost all the pictures I take are blurry on the top 1/3 of the photo. It hasn't always been this way and it doesn't happen all the time so it makes me think that possibly I have somehow gotten some of the settings off. The bottom 1/3 is sometimes a little blurry too but not as much as the top. Can anyone tell me what would cause this and what I can


Try this...go into the menu and find "reset"..follow the on-screen instructions. ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

White out Every photo I take seems to white out, as if it is letting in to much light. But it is more than this, as it is possible to see white streaking on the image as well. I have also tried taking photos in various manual settings, resulting in the same problem. It seems to be a little better in doors. However when I use video mode the image is normal. This problem first occured on holiday in Singapore - when I took it into a shop out there they said it was probably the heat. But the problem


There was a known problem with a batch of early F710s that came out of Japan - I managed to get mine sent back for a free repair... but that was four years ago. Unless it's still under warranty not sure what you can do. ... Fuji FinePix F710 Digital Camera

I have a Nikon CoolPix 4300 that is about 5 years old. I mostly use it in the Macro mode for close-up photos of the sewing thimbles I sell on eBay. The last two times I've used the camera, I can take only a few pictures (2 or 3) before the camera shuts itself off. It will come back on by itself, after a while, but I have to totally reset it to take only a few pictures, then it shuts off again. I have set the auto shut off to 30 minutes, but that didn't help. I have tried several different batter


The capacitor in the circuit board is getting weak not holding the circuit open. That is why it is shutting down. The cost to repair it outweighs the cost of a new camera ... Nikon Coolpix 4300 Digital Camera

I own an E500 finepix and I am shortly to go on holiday where I will be taking a lot of snaps, so I would like you to tell me which setting would be best for the ,most general snaps irrespective of the size of my sd card.I have 64mb and a 1gb cards to use. I am aware of the fact that I have a manual , but I cannot seem to get the max '(photos) out of my cards , could you please help, because where I am going to take the photos is a once only place . C Calvert


If I understand you correctly, you want to get the most pics on a card possible. You can do that by going into the menu and choosing the lowest quality setting and lowest number of pixels. The problem is, if you later decide to print the pics or if y ... Fuji FinePix E500 Digital Camera

Blurry photos I love my A80. I know it's best to use a tripod to avoid camera shake but I can't always use a tripod when taking photos of my active toddler. I like to do close ups of her face and her playing but pics of her are blurry and this is a disappointment. What setting do you recommend?


Automatic "Portrait" mode would work best for what you describe. It's the setting showing the profile of a woman on your mode dial. Try it both with and without flash (press the "lightning bolt" button on the back of your camera). ... Canon PowerShot A80 Digital Camera

Canon SD600 I used my camera to take pictures of fireworks and I noticed that afterwards, all the photos I was taking outside in daylight were turning white. If I take pictures in the dark, they turn out perfect, and low light pictures are fairly normal except anywhere where there is a light source (lamp, window, etc) the color is streaky and orange. This particular camera has no way to adjust the aperture settings and I am considering taking it to a shop to have it looked at. Is there anything


It sounds like you may be in a low light mode. Put the camera in record mode, and then press the set button (in the middle of the up down left right keys). You probably want the camera to be in automatic mode (or A). If this doesn't solve the prob ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3982 seconds