Having problems with your Olympus Camedia C-5050 Zoom Digital Camera ?

On start up, the lens doesn't protrude. It makes crunching sound -- like the lens cap is still on -- even though the lens cap is off.


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
The lens is powered by a small motor in the lens itself. It is a planetary gear reduction drive through 4 different gears and a 5th that operated the optical viewfinder . Any one of these can be bad, but most of the time, the cam pins in the lens barrel will come out of the tracks of the rotating ring that extend the primary lens. The only way to get the lens back on track is to force the pins back into the grooves of the cam and that is not easy externally as the pins are metal and the lens barrel is a softer plastic that tends to embed the sharp cam pins. IF you are good with mechanics, you can take the lens out without about 11 small screws and a soldering iron (only 2 large grounds, that are easy to solder back, no ribbon soldering) I can do the repair with spare parts for less than the price of a new memory card. Contact me offline 68pishta at gmail.
Repair Help & Product Troubleshooting for Olympus Camedia C-5050 Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On start up, the lens doesn't protrude. It makes crunching sound -- like the lens cap is still on -- even though the lens cap is off.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia C-5050 Zoom Digital Camera

Panasonic Lumix dmc-fz8 I turn the camera on, it wont focus and the lens doesnt start coming out. Then it says remove lens cap and press > button. Even though my lens cap is off


Hi,\015\012When the lens cap off there will be sensor inside your camera it will switch on automatically perform the normal functioning of camera . You are facing this problem due to defective sensor . You need to take to service center to repa ... Panasonic Lumix DMC-FZ5 Digital Camera

I just received my Nikon D3100 in the mail today, and I was so excited. When I opened the lens cap on the camera body to put the lens on a small, clear-ish rectangle fell out. It was surrounded by a thin cooper colored frame that is easily removable. It looked like a little magnifying glass so I am kind of nervous. It seems to shoot pictures fine, but some times it tells me the shot is to dark even though I am in full light. It also took black pictures the first few times and if I point it di


Anything falling out of the inside of your camera is not a good sign, since it is new, I would have it exchanged as soon as possible for being defective. ... Nikon D3100 Digital Camera

Autofocus problem I dont really know how to explain my problem.. I got a Nikon D40 for Christmas last year and last week we went on vacation. The camera was working fine. but suddenly the camera wouldn't auto focus. Everything is set on auto.. I only have the lens that came with the camera. The battery is charged.. it doesnt even make a noise like its trying to focus. the wiewfinder bracket thingy lights up red but nothing after that. I am new to photography so I know I probably sound like


You have to hold the shutter\015\012down halfway as you compose the first shot so the AF system can focus\015\012and lock, and then the camera fires instantaneously when you press the\015\012shutter the rest of the way. ... Nikon D40x Digital Camera

The gears seem to be frozen. the lens wont move in or out by self and when turned on screen displays turn cam off the back on? If you get the lens out or push it back in, in wont move back into the other position by itself. it doesnt even make any sounds like its trying to move


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FX50 Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Camera. when i turn my camera on it makes a weird sound like a loud buzzing and clicking. and then it shuts off. sometimes even with the lens cap open. i tried charging it. but that did nothing


Both of you guys are having "Lens Errors". That means that your lens have sustained some sort of damage and will not open properly so they need to be sent into the Casio repairs department. Call them at 800-706-2534 and ext 2 and tell them that you ... Casio Exilim EX-Z750 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

My Fujifilm hs10 is making the noises when I turn it on, you can even take a picture... I just can't see anything on the screen... The lens cap is off... but the screen is still black... I would like some help, because I am not a camera expert.. but I do need to have a working camera this weekend for a school project. Thank you!


... Digital Cameras

Hello.. My the autofocus on my xsi is not working.. it sounds like the lens is not catching in a way.. like, the camera is asking it to focus but the lens isn't moving at all... it makes the sound it usually does when focusing but itt sounds maybe like when your tring to statr an car and it doesnt start... it just keeps straining... do you understand what I mean?


Yes sort of, we have several possibilities first is that if the lens is equipped with an auto and manual switch the switch may have been set to manual or it's positioned between manual and auto focus. Failing that I'd suggest you turn off the camera ... Canon EOS Rebel XSi Digital Camera

Hello Expert, My Olympus Myu 760 got stuck on its lens. Please help me how to fix it. When I try to turn it on, I can hear the sound like retracting the lens but the lens still doesn't move and on the LCD appear the message like this D: 5 f 08 5 e02 what does it mean ? and how to make it normal again. thank you very much in advance !


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

Jvc gr-d73aa I have a jvc gr-d73aa video camera, and when I switch it on the "lens cap on" warning shows when the cap is off, and the screen is black like the cap is on, also it records a black screen but the sound is fine. I'm assuming a lens problem, can you help.


Looking through the problems posted for all jvc camcorders it became obvious that mine was CCD problem, encountered by many others. Also jvc are fixing this for free, so if you have this problem go to a jvc sevice centre and you should have no proble ... JVC Digital Cameras

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

I dropped my camera last night with the lens open. right away i tryed to shut it off and the lens just make a noise like their tryign to shut but they dont. i left it alone for the night and this morning it still does the same thing. The lens are just stuck open and no screen even comes up when i try turning it on. Ive had this camera for about 2 years now so i dont think i still have warranty on it. What should i do?


Take it to the repair shop, I think this is the only solution... ... Casio Exilim EX-S500 Digital Camera

Panasonic dmc-fz5 camera says remove lens cap and press- button even though the lens cap is already off


I posted a solution yesterday on Fixya, but can't find it. Same problem, same camera, solution reached on Feb 10 2009 after a couple days of frustration. I gently wiggled the lens by pushing my fingers one on either side (not the outer ring, but th ... Panasonic Lumix DMC-FZ5 Digital Camera

Lens cap error even though the lens cap is off


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Nikon COOLPIX L100 Digital Camera

My Nikon L100 is stuck on a lens cap error even though the lens cap is not on.


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable tryi ... Nikon Coolpix 5700 Digital Camera

Lens problems I recently purchased a Kodak Z7590. I have only used it a couple times. My daughter set it on the couch (still on). When I sat down beside of it the camera slid down behind the cushion. I didn't notice it till I stood up. Now the lens will not retract. The lens appears to be extended all the way and has a slight tilt to it. When it is turned on it sounds like it is trying to work, same when it's turned off. I tried to twist the lens as it was powering on and off to get it t


This is a simple fix. Take the lens and with slight pressure, pens the lens until it's straight. It will make a clicking sounds and lens is lined up and will retract. ... Kodak EasyShare Z7590 Digital Camera

Lens obstruction I have a Fujifilm s4200 I dropped it on a carpet, the camera turns on, but the error code says turn camera off, remove lens cap or obstruction and turn camera on. Can I take this apart and fix this myself ? Also the lens sounds like it is loose


... Fuji Digital Cameras

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

I have a casio exilim EX-Z200. it turned off with the lens partly exposed. it would not retract fully. i tried turining it on but it turns off again with the lens still partly retracted. it makes a somewhat like vibrating sound when the camera tries to retract the lens (while it turns off by itself). i cannot also view my photos since it won't turn on. i tried turning it on-off, removing battering and sd card and pressing the on/off, green and red buttons at the same time but none of these wo


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Casio Exilim EX- Z200 Digital Camera

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.


Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

It completely quit working even though I have tried all the troubleshooting that has been recommended. The lens is stuck in out position and will not turn on even with new batteries installed. I have only owned this camera for 2 years and really liked it but am disappointed that it has quit working.


Hi, today i spoke with the repair person of Samsung service center. For your problem of the camera lens not working, he informed me that the small DC motor which is responsible for the lens to work has to be lubricated ... Samsung Digimax S500 Digital Camera

I dropped my Panasonic Lumix DMC Fz7 camera and it landed on the lense while open. now it's jammed and won't open or close. when I turn it on I get the message "remove lens cap and press arrow button" even though the lense cap is not on.


... Panasonic Lumix DMC-FZ7 Digital Camera

Was shooting with Canon PowerShot S3 IS and the lens won't retract,screen says lens error,restart camera. I have restarted camera, changed batteries etc... still nothing. You can hear a clicking sound like something should be happening, but it won't retract.


According to what you were doing there is a possiblity that its jus sand or someting that got caught in the lens. please take it to the neariest repair shop to get it cleaned/ checked. ... Canon PowerShot S3 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3247 seconds