Having problems with your Olympus Camedia C-755 Ultra Zoom Digital Camera ?

Olympus c755 The settings are lost after I turn the camera off. Example full auto focus reverts to the off state, When the camera is turned back on I have to reprogram all settings.



Answers :

Well the battery can\302\264t be replaced by the user, the battery it\302\264s on the mainboard and is weldded to the mainboard, i don\302\264t know if u can find this type of batteries on the shops.\015\012it\302\264s a kind of watch battery but it\302\264s recharchable.\015\012good luck
Your backup battery has gone dead. Check your manual to see if it is replaceable, or if it needs to be replaced by a repair shop.\015\012\015\012I have a C-750 on my bench now in for repair, and I do not see a customer-replaceable backup battery. I do not know if this applies to the C-755, but the C-750 requires disassembly to replace this cell.\015\012\015\012David Millier\015\012Advance Camera Repair
Repair Help & Product Troubleshooting for Olympus Camedia C-755 Ultra Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Olympus c755 The settings are lost after I turn the camera off. Example full auto focus reverts to the off state, When the camera is turned back on I have to reprogram all settings.


Well the battery can\302\264t be replaced by the user, the battery it\302\264s on the mainboard and is weldded to the mainboard, i don\302\264t know if u can find this type of batteries on the shops.\015\012it\302\264s a kind of watch battery but it\ ... Olympus Camedia C-755 Ultra Zoom Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?


... Bushnell Digital Cameras

Camera turns itself off too soon. There must be a setting to change the length of time from when you turn it on until it turns itself off, which is currently about 15 sec. Very annoying when you turn it on the camera comes on and works fine. If you wait more than 15 seconds the camera is off and the only way to get it back on is reach to the on switch and turn it on again. By then your subject is no longer smiling This should be very simple to find in the manual. Apparently the feature is not na


Are you sure it's off? As a power-saving feature, the camera shuts down but not off...a slight press of the shutter button should wake it up. ... Nikon D40x Digital Camera

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam


Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

The lens on my samsung camera model L830 is blurry and when I take the picture it comes out blurry also...I had set my camera (while it was on) by my phone on the counter and turn around to turn it off and the screen made square black and white blocks. I immeditely turned the camera off and then turned it back on and tht's when it was all blurry. I hope that this was not a magnized issue since it was next to my cell phone. Thanks for any help.


... Digital Cameras

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

I have a panosonic TZ3 and i can not upload the JPG or video image files to my imac. I have followed all instructions and even when the computer is turned off camera will not mount or activate an untitled folder to the desk top when using the usb connection and turning the computer back on. the mode dial on the camera is set to play back but nothing happens. Would appreciate any advice!


Use a card reader to download your pictures to a folder you create on your desktop. ... Panasonic Lumix DMC-TZ3 Digital Camera

Nikon D80, how do you turn off the r09, r11 and/or r17 alert (depending which Image Quality setting I have the camera set to)? I have sent the camera back to Nikon twice and twice it has come back with the r-whatever still appearing on the LCD screen once I depress the shutter button.


The r09, r11 or r17 just tells you how many pictures you can shoot before the internal memory buffer is full. It's not an error message, and I don't think there's any way to turn it off. ... Nikon D80 Digital Camera with 18-135mm Lens

I just turned on the camera to take a picture and noticed that the camera was not focusing. I tried changing the setting, turned of the camera and restarted it, removed the battery and put it back in. Nothing I could think of would make the camera focus. The screen only shows blurry and out of focus. The pictures taken by the camera are blurry and out of focus. Any suggestions on how to fix it? Thank You


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it ... Pentax Optio M40 Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it


Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help


I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

Last night was taking photos indoors with flash on auto setting. All appeared fine except thre was a vertical line on the viewfinder, not quite half way across. After about 4 flash photos, the flash turned itself off and it wouldn't allow me to adjust the settings back to flash again. I checked the setting and it was still on auto and there was plenty of battery left. Tried a couple of shots and they took, but no flash, so useless. Turned camera off for half an hour then tried again and it was f


I have similar issues. flash won't fire but pops up normally. cannot adjust flash setting that remains in always off position.\015\012\015\012help. ... Canon PowerShot SX 200 IS Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta


Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.


Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera

Hi we bought a vivitar v8324 for our parents for christmas who are not technically minded at all and hoped it would be a nice and easy and shoot, as there is no detailed manual in the box could you please tell me how do we make sure that the flash is on automatic every time they turn the camera on? we keep setting it to be auto flash but each time we turn the camera back on it has turned of again. Is there a manual of some sort that we could download for them as having something in front of them


You should contact Vivitar directly at www.vivitar.com You can e-mail them or call either way they should be ableto get you what you need. I hope this helps. SuperRichard37 ... Vivitar V8324 Digital Camera

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

Camera gose back to defult setting


Http://www.fixya.com/support/t161213-replacement_internal_batteryJust found the above on the same web site. This looks like the solution.. ... Olympus Camedia C-750 Ultra Zoom Digital Camera

Settings when I turn my camera on its side to take a photo I get wide black borders I hve reset camera back to manufactureres setting but that did not change it


Turn on the camera and select the MENU buttonClick the RIGHT arrow (to the Wrench/Hammer icon)Click the DOWN arrow - scroll down to AUTO ROTATE.Try setting that to OFF.Does this help? ... Canon PowerShot S3 IS Digital Camera

My camera deletes the photos taken everytime I turn the camera off. I have all the settings set back to the factory defaults, but it still deletes them. Help


Are you sure they're deleted? Have you tried downloading them using a separate card reader to your computer? ... General Electric A835 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3306 seconds