Having problems with your Olympus Camedia C-770 Digital Camera ?

Camedia software does not recognize connection to C-770 via usb cable what could be the cause of this? the cable is connected to the pc and camera and the camera is on. When the menu comes up on the camera and I select pc the message "one moment" appears but does not go away


Answers :

Did you install all software that came with your camera? If so, you should've seen a balloon on the bottom right corner of the computer screen saying the software was "successfully installed and ready to use" at the time of installation. Try this, then turn on the camera and connect it to the computer. The message doesn't go away because it's constantly looking for a connection to your computer, which your computer isn't detecting and is most likely that the proper drivers (which are in the CD) were not installed.
Repair Help & Product Troubleshooting for Olympus Camedia C-770 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camedia software does not recognize connection to C-770 via usb cable what could be the cause of this? the cable is connected to the pc and camera and the camera is on. When the menu comes up on the camera and I select pc the message "one moment" appears but does not go away


Did you install all software that came with your camera? If so, you should've seen a balloon on the bottom right corner of the computer screen saying the software was "successfully installed and ready to use" at the time of installation. Try this, th ... Olympus Camedia C-770 Digital Camera

When I plug my camera to the computer and the menu comes up I try to download the pictures to my pictures. When I select it nothing happens and it just goes away.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Panasonic Lumix DMC-TZ3 Digital Camera

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas?


The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas ... Digital Cameras

My camera menu (Pentax K100D) often cuts out before I can select items. This is a random experience as sometimes it holds for more than 1 or two seconds .. but it is extremely frustrating when trying to chnage any aspect of the menu or the function button for ASA sensitivity. As this is my first digital camera it is leaving a very bitter taste in my "mouth". Aside from throwing it away what can I do ? The supplier has already given me a new camera and it still has the same problem .....


If you have a similar problem weith the replacement study the manual carefully to ensure you are doing things correctlyAnd if you are sure then get onto Customer support at PentaxThis may be a know problem to which they have an answer. ... Digital Cameras

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Hi, I have the Sony Cyber Shot DSC-W130 digital camera - whilst away on holiday a message appears when I turn on the camera "turn power off and on again". I have done so many times but it still comes up with the same message - hence not allowing me to take any pictures. I can view existing images through the window and I can download them fine - I just can't take any new ones. There is plenty of space on the card and a full battery. Any suggestions?


Hi. Yes. turn it on and go to the menu. find reset and reset the camera. this will return it to factory settings.\012\012if you can't get into the menu or if the steps above do not solve the problem do what is called a hard reset. Re ... Sony Cyber-shot DSC-W100 Digital Camera

When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55


This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera

Gone? I had my memory card in a ready hooked up to my computer. I took several pictures off the card and saved them to my computer. But I left several pictures on the card. I put the card in my camera and got a no image message on my camera. I took the card out put it back in my computer and was able to view the photos. I but it back in my camera and there were still not available. So I went to the menu of my camera and selected the format card button. Now it says my card is empty. Is there anyw


Buy a memorycard reader and stick it in the computer. not by usb cable on the camera\015\012\015\012then\015\012\015\012You might use a program like ontrack easy recovery.\015\012choose data recovery then formatrecovery. ... Canon PowerShot A410 Digital Camera

Zoom ERROR When I turn my Camera on it comes up saying Zoom Error. I can't Zoom in or out - and all I can see is a black screen. Last time I used it - I took a picture and put it bck in my bag - when I pulled it out again the error msg came up. It has happened once before and I reset the camera through the menu and the msg went away and the camera went bck to normal so when it happened again I press reset but this time it hasn't made a difference. Any suggestions?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Fuji FinePix A820 Digital Camera

Focusing problems Hello, I have been trying to take close-up pictures (between 4-12 inches away from subject) but when I press the shutter button halfway, on the screen I see the image come into focus, come out of focus, come into focus,.. on and on for several moments until it settles on the out of focus image. I've tried setting the camera to the macro and super macro settings, and that doesn't help at all. I know it can focus, because I see it on the screen but for some reason it chooses the


You may be beyond (up to close) the focal capability of the lens. Even though there is a macro setting, the lens may not have the capability to focus on an object that close (without adding an external macro lens). The specification on the minimal ... Olympus SP-350 Digital Camera

I have just bought a cannon 40D THE SCREEN COMES UP WITH THIS MESSAGE:CAMERAS INTERNAL TEMP IS BECOMING TO HIGH CANNOT SHOOT. i HAVE NOT USED THE CAMERA MUCH JUST LOOKED AROUND THE MENU FEATURE ETC AND TRIED TO TAKE A PHOTO IT IS THE FIRST TIME USING THIS CAMERA. i AM USING A SCANDISK 111 4 gb. i HAVE FORMATED, THERE IS NOTHING ON THE DISK ANYWAY. TAKEN THE BATTERY OUT AND REINSERTED. ??????????????


It appears you have a defective camera body, warranty should cover it. Go to canonusa.com and contact their service dept.\015\012\015\012Hope this helps out. Happy Thanksgiving!\015\012Gom ... Canon Digital Cameras

Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to


Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera

I was taking pictures with my digital camera and all of a sudden the lcd screen said memory card not readable, need to format card. i selected cancel. the card is full of pictures from a recent vacation. how can i get these pictures off the card. my camera will not let me do anything. i can't even get to the menu. this message is the only thing that will appear. please help!!


Probably you card is damaged. \015\012\015\012Try remove the card from camera and use any memory card reader to transfer the images to your PC. Then formate the card and insert it to the camera. ... Kodak EasyShare ZD8612 Digital Camera

Format error I have a Samsung digimax A40 camera. I 've just purchased a Lexar 4gb SDHC card. When I've tried to format the card for use, the screen comes up initially with "card error", then a screen to format - yes/no. When I press on yes, it takes a few moments and then comes up with Format Error, and turns itself off. Any suggestions on how to overcome this? We are heading away on holiday soon and wanted a bigger sd card as I currently only have a 256mb card in it. Thanks, Tracey.


I don't believe the camera can handle a card of that size. I believe the camera only supports up to 512MB cards, anything above that is not guaranteed. \015\012\015\012 ... Samsung Digimax A40 Digital Camera

What does file error on selected photos mean? the pics haven't been deleted but are no longer visible with this message in the box. The photos can be seen and printed out at Boots but a ? is in the box on camera and the message file error coming up


... Samsung Digimax L730 Digital Camera

Lens error When camera is turned on the lens will come out and then right away goes back in-an error message says lens error restart camera


Did you try replacing batteries.will it turn on long enough to restore it?if this is a new camera send it back it could be a software issue or mechanical breakage.Also get a can of air and blow the lens off to ensure no debris is ho ... Canon Powershot SX110 IS Digital Camera 9.0MP

I have a nikon d70 digital camera with which I have shot a few thousand exposures. A number of what seem to be minor software errors have been cropping up. For instance: I can't get the camera to "beep"; I can't format the memory cards using the 2 button system - I have to go through the menu setup; I can't select certain of the image quality options using the "quality" button - I have to go thru the manu. Certain numbers come up unreadable on the control panel. The above problems do not stop


Hi,\015\012 Sounds like you have a hardware issue and not so much a software problem...\015\012Try: removing battery and lens leave off for a few days.\015\012put in a newly charged battery and different lens...\015\012turn on ... Nikon Digital Cameras

I am getting a 'COACH TEST' screen when I turn my camera on with several menu items to select below the message...on the bottom of the screen it reads "Only for expert!!!" Can someone help...it's a new camera and I can not get off this screen and I do not know what it means.


The Shutter switche is stuck pressed on the circuit board .This is caused by the shutter button being pressed to hard or camera being dropped onto button.The switch can be desoldered and replaced.\015\012But good soldering skills are required.t ... Vivitar ViviCam 8400 Digital Camera

I have a problem with my card-reader inside the camera and am not able to shoot any pictures at the moment. After I changed the batteries , I turned on the camera which suddenly responded the message 'card error'. Whatever I tried to do, didn't work out. The menu works properly, constantly showing the card error. At home I discovered that the XD-2GB card worked properly in the card-reader connected to the PC. I also have a CF 4GB card of Transcend which I bought recently and when I put the card


Check the Card slot, contacts, dirt, etc. ... Olympus EVOLT E-500 Digital Camera

Stylus 600. When I turn camera on a blue screen comes up with a message [xD] Write Protect. What does this mean and how do I make it go away?


In order to remove the message of write protect you will need to format the xD memory card. The card has somehow become corrupted. To format the memory card - press Ok - right arrow to Mode Menu - down arrow to Card tab - right arrow to Card Setup ... Olympus Digital Cameras

Can use the camera comes up with the message saying "green mode must be canceled to use this function" (menu)


You haven't stated which model you have, but on Pentax models "green mode" is an auto-everything mode. You just point the camera, adjust the zoom and the camera chooses everything else. As a result it does not allow access to almost all other functio ... Pentax Digital Cameras

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on . The playback mode works fine and after 10 econds the lens returns to closed position. Is their a combination of buttons that reset the camera??


... Panasonic Lumix DMC-FX55K Digital Camera

When I turn on my HITACHI HDC-1291E camera on it comes up with the pc menu and won't let me move away from that even if it's not connected to the computer


... Digital Cameras

I have a Canon A400 that is displaying the common 'memory card error' message. I've been through most of the tricks that I've found on the Internet but still no success. Tried multiple memory cards, compressed air and formatting the card. For some reason when I try to format any card it shuts off the camera completely when I select that option from the menu. Any ideas out there?


There are several possible causes for "memory card locked", "memory card error", or "no memory card". The most common is trying to use a 4GB or higher SDHC card with an older camera made before SDHC format came out. Other causes include problems with ... Canon PowerShot A400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4211 seconds