Having problems with your Olympus Digital Cameras ?

In my new Windows 7 program I cannot seem to download any pictures from my Olympus SP-600 UZ Camera, also new to me, I had no problems on a computer with Windows XP. Any suggestions ?


Answers :

1 • Unlock focus area selector. • Auto-area AF selected for Custom Setting 2 (AFarea mode): choose another mode. • Press shutter-release button halfway to turn monitor o?\302\254? or activate exposure meter • Memory card is full, locked, or not inserted. • Flash is charging. • Camera is not in focus. • CPU lens with aperture ring attached without locking aperture at highest f/-number. • Non-CPU lens is attached: rotate camera mode dial to M. • Mode dial rotated to S after shutter speed of bulb selected in mode M: choose new shutter speed • P, S, A, and M modes: lower ?\302\254? ash. • Digital Vari-Program modes: turn ?\302\254? ash o?\302\254? Turn long exposure noise reduction o?\302\254? Turn long exposure noise reduction o?\302\254? Press multi selector up or down or rotate sub-command dial to choose photo information displayed Select All for Playback folder. Note that Current will automatically be selected when next photo is taken • Select On for Rotate tall. • Photo was taken with O?\302\254? selected for Auto image rotation. • Camera orientation was changed while shutter-release button was pressed in continuous shooting mode. • Camera was pointed up or down when photo was taken Use Nikon-approved card. • Card may be damaged. Contact retailer or Nikonauthorized service representative. • Delete unwanted ?\302\254\302\201 les or insert new memory car after removing and replacing the memory card and powering off then back on your cam, you may see how the system now registers your photos will having to click back and forth between AUTO and MAN. I posted very closely related troubleshooting steps to take in order to prevent your CAM from performing badly. Check your CAM batteries to ensure they are using only approved NIKON batteries as anything else will cause you lots of errors and potential problems. When you using the timer or remote options, remember these are controlled by battery as well, radio frequency, and radio wave lengths. When you press the button to take a photo, inspect the button, press firmly for a second and release. If your button is not performing the way it should, inspect it to see if any wear and tear is visible to you. Check free deprey around the button such as DUST, HAIR BUILDUP, and small particals that are hardly visible to the human eye. With very low velocity pressure air, blow around the shoot button as build up will cause the same error your experiencing.
Repair Help & Product Troubleshooting for Olympus Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

In my new Windows 7 program I cannot seem to download any pictures from my Olympus SP-600 UZ Camera, also new to me, I had no problems on a computer with Windows XP. Any suggestions ?


1 • Unlock focus area selector. • Auto-area AF selected for Custom Setting 2 (AFarea mode): choose another mode. • Press shutter-release button halfway to turn monitor o?\302\254? or activate exposure meter • Memory card is ... Olympus Digital Cameras

When I connect my camera to the computer I don't get a popup window asking what I want to do with the camera. When I first got the camera there was no problem but after getting a new HD and reinstalling Windows XP and the Canon softwareI I can't seem to get any pictures off the camera. I do get the sound from Windows when I plug the camera into the usb port and turn it on that it recognizes somehting is there but then nothing else happens. Also when you turn the camera off Windows makes the soun


You might be able to type play back in your search bar under the start menu depending on your computer and o.s. (operating system) and bring up that window. ... Canon PowerShot A620 Digital Camera

I had a Canon powershot A1000 IS, but it broke (the lens would not retract) so I purchased a powershot SD 1300 IS. I have installed the CD that came with the new camera into my computer.(Windows XP). Now, here's the problem, when I try to download my pictures from the camera onto the computer, AND I have followed the step by step directions, but the camera window would not open up, so had to click start menu, all programs, camera utilites, camera window, camera window. The camera window was


Hello,Almost all cameras now have the plug and play functionality which acts like a USB Flash drive. What you can do is to check the camera under My Computer. It should show up under that list and you should be able to copy the files from ... Digital Cameras

Compatability I have a Sony DCR-TVR17 digital Handycam that worked fine for downloading pictures to my e machines desktop computer with Windows 98. Recently I bought a Sony Vaio VGN-NR498E with Windows Vista. I can no longer download pictures to my computer from my camera. I suspect the problem is a compatability issue between my camera and Vista. Is there a new driver for my camera for Vista?


... Sony Digital Cameras

Videos play on camera, not on computer. Why? How to fix? I took SD memory card out of camera, plugged into computer, copied direct to computer. The video files never play. the Intelli software required to transfer and convert video files to make them work properly? I changed form Windows XP computer to a new Windows 8 computer. Also, a separate issue on another SD memory card, copying SD memory card to computer, many files not recognizable, can't locate. Might be problem with that SD card. This


... Samsung PL200 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

What could be the reason that I can't import pictures from Nikon Coolpix 5400. When i started using a new computer (Windows 7) the problem appeared. I can't import any pictures from camera. There was no problem when using Windows XP. Thank you in advance for your help:)


Hello and welcome to FixYa\012 \012The problem is probably related to the internal driver database of windows 7. Your camera probably doesn't have a generic driver to use.\012Please go to a elec ... Nikon Coolpix 5400 Digital Camera

I have the Aiptek Mega Cam (also known as Aiptek Pencam 1.3) together with the install disk. I can install all fine in Windows Xp but no way to have it done in Vista. When i put the disk in my vista PC, it installed Mega Camera Manager but when i opened it always show " The computer can't connect to your camera!". If i do the same in Windows XP everything goes smoothly and it show pictures is inside the camera. Event when i try to brows the driver when vista open the window says "found new hard


... Aiptek PenCam Mega 1.3 Digital Camera

New computer with Vista. Pictures download but not video. How do I download Video from camera. I also have the docking station and it was easy with Windows XP.


Get vista compatible software from kodak's website ... Kodak EasyShare DX7590 Digital Camera

My camera needs formatting every few days. At first i thought that the XD card is broken, bought a new one, but the same problem appeared. I can take pictures, but when i connect the camera with the computer, the pictures are gone, and they are also not visible on the camera display. after formatting, it works maximum 1 day. Please help me. Thanx


Heloo There#1Insert your ( memory card , flash disk , cellphone , .... ) into your computer.#2Open up 'My Computer'. You should see it under the list of available drives.#3Check its contents first to make sur ... Olympus FE-230 Digital Camera

I have a Fuji 100fd and a new Dell inspiron 840 computer with windows 7. This is supposed to be a very easy version to operate. Well it isn't and I am having problems uploading my pictures from my camera to the computer. I know I have done this before because I have pictures stored on my WD external hard drive. Now why can't I upload my pictures? What has happened? Mary


Hi,\015\012You can connect youe camera to pc through the USB cable and transfer the files which you want to do . When you connect there will be a temporary drive indicated on your machine . That drive is for camera and you click and transfer th ... Fuji FinePix A345 Digital Camera

Sony dsc-f717 memory stick error I have a problem with my camera mentioned above, error number is C:32:01 that shows after I take several pictures or a short video. I changed the memory card into a new one and I still got the same problem. I also fomatted the memory stick on the computer and in the camera.


A letter and number error code of C:13:xx \012is an indication the recording media (floppy disk or Memory Stick® \012media) you are using is either not supported for use with the camera, \012not formatted properly, or is damaged or faulty. Since ... Sony Cyber-Shot DSC-F717 Digital Camera

I have an Olympus C5060 camera, and with it came the Camedia Master 4.1. I also purchased the Pro upgrade. I recently purchased a new computer, a compaq Presario, with Windows XP Home. I also, more recently, purchaseed an Epson Photo RX595 porinter. I had some problens having the printer recognized by the computer, and now when I attempt to print pictures with the Camedia 4.1 and check the for "Properties" I get the notice "Failed to summon the printer options". I uninstalled the camedia pr


... Olympus Digital Cameras

Hello, I have a Casio ex277 digital camera. Also have a new battery for it. The problem is that it won't focus clearly and makes a slight noise in the lense shudder when a picture is taken. The photo is not clear in the display also. I have set the camera back to default to no avail. Any suggestions would be greatly appreciated. Thank you, Greg E.


Hi,\015\012It will be white balance ,set the white balance to auto and when you take a snap try pressing the shutter button half way to let it focus before you shoot. You also make sure the camera is in auto mode . If y ... Digital Cameras

Coolpix p50 camera is not recognized by computer (windows xp SP3). It does not appear in the explorer, nor as source in the 'Nikon Transfer' programm, when connected to USB port (and switched on) -> Pictures cannot be transferred. The problem occurs since the new installation of Windows XP. Before the transfer worked without problems.


Simple...just get a separate card reader. ... Nikon Coolpix P50 Digital Camera

I just got a new computer with windows vista. was wondering if i have to download anything to be able to put pictures from my samsung camera (D53) on the computer, and also video from my camera...not sure how to do it. thanks, laura


Hey laura. I was imagine you have some very supped up computer. If your camera does not have the software CD with it. Simple plugging your camera into your usb port on the computer should enable you to view the camera and pictures and videos. Your ca ... Samsung Digimax D53 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Bought in 2005 and have enjoyed its marvelous pictures. I put new batteries in, checked the ''all but empty card'' by seeing if it would download to computer; it did, no problem there. But, when I turn on the camera today the image in the camera's LCD shows what it sees with a quarter inch white bar at the top and flickers with a slow roll of the image viewed. The colors are also slightly off. I do not remember dropping the camera. I noticed that the screw plate on the bottom edge had one


If it is Canon A75 camera then its known problem of bad ccd iamger and canon will repair it free of cost.Click ... Canon PowerShot A75 Digital Camera

FORMAT ERROR shows up in the window. Cannot take pictures, or review shots. Gateway DC-T50 Digital Camera The problem occurred after I tried to hook it up to my Mac computer to download pictures which I was unsuccessful at. Also fiddled around with the round setting on the top. It's now set on "A"


Hi,\015\012\015\012Remove the batteries wait a few minutes. Put fresh batteries back in and turn the camera on. This resets the camera.Then remove the memory card from the slot from your camera. Then insert back and check you will not be ... Gateway DC-T50 Digital Camera

Camera message is: memory card requires formatting : I chose the option to format and camera will start formatting then stops and this message pops up:please format memory card or put in new memory card. I changed memory card and same thing happens,I have also tried moving switch on card, This problem started when I used card to transfer pictures to computer.


Try formatting through the computer rather than from within the camera itself. Or, just open the card on the computer, select all, then delete. There's probably a large file in there somewhere that the camera just doesn't have enough ooomphh to move ... Digital Cameras

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well


Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

My new computer has windows 7. My question is I have a panasonic DMC_TZ3 camera and when downloading to PC, lumix simple viewer will not let me save pictues to my pictures folder. When trying to save windows 7 says there is a problem with simple viewer and looks for a solution and quits the program. How can this be fixed?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Panasonic Lumix DMC-TZ3 Digital Camera

Hello, I have a Canon PowerShot A490, purchased about 2 mo. ago. I have not been able at all to download pictures to Computer using Windows XP. It will not take a Converter Drive or the cord that came with the Camera. Is there a problem with the camera? It is concidered new. I have not been able to register the product, never gives me the indication to enter. Judy


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon Digital Cameras

I have a Kodak EasyShare 2700. I did not have the SD card. I took pictures and plug in the cable, but was not able to export the pictures from the camera to the computer. I took the camera to Office Deput. They tried to connect with my cable and then with a cable from a sililar new camera. They could not get the pictures exported to there computer. They then placed a SD card in the camera, exported the pictures to the card and then to the computer. What is the problem with not being able to expo


I have a Kodak Easyshare 2700 camera, it loses power after a couple of photo's batteries are perfect have you any idears\015\012 Fred Brown. ... Digital Cameras

Downloading pictures I have a new computer ,has windows vista. I downloaded the original camera solution disk to the new computer according to the instruction . my camera is attached to computer using proper connection. when I wanted to download images, my computer tells me tells me that the camera is not recognized. I already contacted my computer people and they say it is from my camera. Any idea to help me? I appreciate your time and effort. Mehri Yazdi


Greetings myazdi,\015\012\015\012It is unfortunate that some cameras as well as other older programs and Vista do not get along. One solution I have heard of is to utilize a memory card reader such as any of these:\015\012\01 ... Canon PowerShot A530 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5935 seconds