Having problems with your Olympus Digital Cameras ?

I have a C-2100.Troubleshoot says card full. Can't get display to change to clear card or any other functions.


Answers :

Lightly jarred the camera loose connection on sd card.
Repair Help & Product Troubleshooting for Olympus Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a C-2100.Troubleshoot says card full. Can't get display to change to clear card or any other functions.


Lightly jarred the camera loose connection on sd card. ... Olympus Digital Cameras

Hi, i have a nikon L22 and its wont take photos, it was workin fine 2 days ago, when it stopped working i noticed three numbers that have appeared in the bottom left hand corner of the display screen, am not sure if it says 180 or ISO, now i have taken all pics off the camera, so the sd card is blank now, and i have reset the camera, and also formatted the sd card, still there has been no change the camera functions well otherwise it just wont take pics and its frustrating me, please help


If there is any possibility that you have been to the sea coast or a hill station , then it is possible that moisture condensation would have resulted in causing this fault.\012Please use a hair dryer to heat off the camera - just a bit far awa ... Nikon Digital Cameras

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Dear taran_2005, Thanks for your reply to resolve the issue. After sending you my issue regarding Nikon Camera D80, I formated the card. All snaps were deleted as expecter. Display "No Memory Card? and status marked" LOCKED did not changed. I tried to take shots - I took over say 6 nos. The display "No Memory Card? and status marked" LOCKED remained as earlier. I got 3nos 2 GB cards, only one was formmated but could see no result change please. The camera is brand new. Upgrade fIrmaware may be a


Please make sure your memory card does not have the "Lock" setting clicked on. It is a small slider at the side of the card. Check this out and try to save again to your card. ... Nikon D80 Body Only Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Card error with card in it says card error cannot access 1g xd card in camera or card reader.It displays card error.The card ha been sent to 3 photo retrieval places with no success.I do not care about the card, I just want my pictures back. I think the pictures were lost when I was reviewing them in the camera and the batteries went flat.I would be grateful for any help in getting the pictures off the card. thanks from vicki


Dear vivky\015\012\015\012there is a solution :\015\012\015\012visist thuis website , download the program and see if it cam recover your files\015\012\015\012 ... Olympus FE-170 Digital Camera

After downloading images to PC (which seemed to go as usual) I now have an memory error loop of sorts. When I turn on the camera I get "out of memory" in the display. When I go to review pictures the message is "memory contains no images". I have not changed the memory card. (Since the issue came up I've removed and reseated the memory card.) I have not changed The software to download (photo shop elements). Any Suggestions'


Did you yank out the USB cord without using the "safely remove hardware" icon at the bottom right of your computer screen? ... Nikon Coolpix S1 Digital Camera

My camera won't take a picture, just it flashes, and the display says busy. When I press the different adjustment buttons the display says "this function is not selectable in the current shooting mode". However, changing shooting modes does not make any difference.


... Canon EOS Rebel XSi Digital Camera

I have a kodak m1033 that suddenly doesn't do any functions once it is powered on. I have changed the battery and swapped out battery and memory card with another known good M1033. it will not zoom, allow mode change, go to menu. just get a chance to take one picture then it freezes up until it is powered off again but still won't zoom or perform any other functions.


After some really frustrating hours on Internet I managed to solve the\015\012problem myself. 1.Connect the camera to your pc and let it charge.\015\0122.Switch on the camera and let it be detected by the pc. 3.Pull the USB\015\012out while you leave ... Kodak EasyShare M1033 Digital Camera

Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?


Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Hi good evening; i have a casio exifilm digital camera.. when my old memory card got full i decide to change another new but unfortunately the old memory cad got stuck..the repairman said that the lock of the said storage got broke.. so he repaired and he get the memory card by opening my camera.. but on that time i knew that my carmera were alright and nothing problem about the lcd or lens etc..on the time that the repairman got the memory card inside my digicam does not functioning at all..he


Welcome to FixYa.\015\012\015\012I just want to ask if have you tried to check if the battery is completely charged before trying to use and checked the new memory card?\015\012 * try to use a new fully charged battery.\015\01 ... Digital Cameras

Canon PowerShot A495 - Brand new. Used it once and took 40 photos. It then told me to change the batteries which I did. From then on it keeps saying "change the batteries" I've used alkalines and also rechargeable NiMH, These are either new or fully recharged batteries and still I get the same message. I have also cleaned the terminals inside the camera and even those on the batteries themselves. No change. This is clearly not a battery problem. This is a camera problem and its seems I am not th


... Canon PowerShot A430 Digital Camera

I have a canon powershot sx110is and when i turn it on it will not take any pictures but instead gives the message "memory card error." When I put it to the display mode it says the same message plus "memory card locked." I checked the Sd card and it isn't manually locked. I don't know what to do and I don't think I did anything to change the settings. Help!?


First see if the camera will work without the memory card installed. Then format the internal memory using the camera's setting as described in the manual.Then turn OFF the camera and insert the sd card. Turn on and reformat the card too. ... Canon Powershot SX110 IS Digital Camera 9.0MP

Canon ids. Display says card not formatted but when I try to format error message cannot format change cf card. I have tried four cards all with same result.


Hi.This camera only accepts CF cards, and Microdrive cards with a 2GB or 4GB. 8GB and 16GB cards will not work and the camera will prompt an error message.Regards.Ginko. ... Canon EOS-1Ds Mark III Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Hello, My Canon EOS 300D has no display and says busy in the view finder and in the lcd screen also. The focus and flash still work. Can you please tell me what could be the problem. I have taken out the battery and card and it does not change anything. It was working properly but suddenly it does not take any more pictures... i read some of your comments to change the firmware but i was not sure for that i wanted to take your opinion... thanks Mirdash


Hi\012I think your unit has memory card receptance unit bad.( the CF card inserting area pins---bent and shorting), or some of loosen screw moving around and shorting. Mostly it is the pin problem. Your local repair shop would charge around $50 to ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm and EF 75-300mm Lenses

I get an error message on my display showing "cha". When I looked it up in the manual, it says that the card isn't formatted correctly. I bought a brand new card for it, but the same message shows. Can't use it like that! Help??


Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. Look carefully between the lens and the camera bo ... Nikon D50 Digital Camera

I turn the camera on, the Canon image comes up along with various icons, but there is no picture in the viewer - and when I take a picture I get nothing. It's like the lens remains covered. Is this a setting that is somehow changed? I reset - but no change. I can view pictures on the card, so it's not the display. I can also view settings - just not any picture.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

How do I format the card when it says card error on screen? I can not get the screen to change with the menu button


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Konica Minolta DiMAGE 7Hi Digital Camera

Help!!! Hi I have a Dimage 7 HI and It only lets me take one picture at a time before deleting. My card is empty and when there is one picture on the card you get ready to take a shot and it sounds like it is going to take it and you can press the button all the way but it never takes it. on the screen it says that the frames are moving but it doesn't take the photo if there is already on taken. ai need help to figure out why that is . is there a button that got pushed to change the amoun


1. Format CF to FAT16 - no remember how many folders u may have at once2. Set "DRIVE" to single frame3. Set quality to FINE - RAW may take up to 10MB and u can`t take series nor UHV movie ... Konica Minolta DiMAGE 7Hi Digital Camera

I have a 3 yr. old S2 IS Canon PowerShot(PC1130). I no longer get an image through the view finder nor the LCD panel. Recalled images from the memory card also are not displayed. Menu items are displayed and other camera functions seem to work. Batteries are fresh. Please suggest approaches to repair the problem? LB


Problems optical zoom canon PC1130 ... Digital Cameras

I have a powershot 70 camera. Just recently when it powers up I do not get any display on the screen and it will not take pictures any more. I changed batteries twice and cleaned all contacts with no success. I even changed the memory card. Still no progress. Help?


Hi,It is problem of defective CCD Imager Sensor in canon A70 camera and this part needs to be replaced.Canon will replace it free of cost as per announced CCD Imager support scheme. Click ... Canon Digital Cameras

I have a Sony Ax200 DSLR-A200K and it gets stuck after I take a certain amount of pictures. It says 'unable to display' and when I try and delete it, it says 'card error'. Can you help?


You need to format the card. This is best done in the camera. Go through the menu to find camera settings (not picture setting) One of the options should be to format memory card. This process will WIPE OUT EVERYTHING on the card. If you want to save ... FUJIFILM FinePix AX200 Digital Camera

I have a brand new PNY Optima SD card I wish to use with my easy share camera. When I insert the card into the camera it says the memory card requires formatting, then continues to say formatting will delete everything on the memory card. It repeats and WILL NOT FORMAT. I cannot even get to the MENU to format the card. I am not concerned about getting pictures OFF the card - the issue is that I cannot format the card to use in the camera. Yet my Kodak manual says I can. Why won't the camera form


Hi Mr\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\015\0122\015\012O ... Kodak EasyShare C875 Digital Camera

Kodak easyshare c613: memory card says its full when there is no pix on it, what happens is: i turn it on, says "memory card full", i go to review, says "no pictures or videos to display on memory card", exit review, says "memory card requires formatting" i choose to format it, says "formatting..." then its goes back to "memory card requires formatting", just keeps repeating it self. i inserted a new memory card same thing happens. the card use to work fine until one day it started saying this s


If you connected the camera to the computer with a USB cord to download your pics and then just yanked out the cord without using the "safely remove hardware" icon at the bottom right corner of your screen, the card may have been corrupted. Replace i ... Kodak EasyShare C613 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3268 seconds