Having problems with your Olympus Digital Cameras ?

Hi, I have a Olympus Camedia C-460. When opening to take a picture it defaults to a resolution of HQ 2288x1712. Is there any way I change the default to 640x480 which is available but has to be manually selected each time. Thx Rgds Paul


Answers :

You need to go to the Menu and set the value for All Reset from ON to OFF. This will retain any setting changes that you make in the camera once it is powered off and back on. Press Ok - right arrow to Mode Menu - down arrow to Setup tab - right arrow to All Reset - then right arrow over to the selections of ON or OFF. Change it to OFF and press OK. It should retain SQ2 until you switch All Reset back to ON or manually change the resolution to be something else.
Repair Help & Product Troubleshooting for Olympus Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have a Olympus Camedia C-460. When opening to take a picture it defaults to a resolution of HQ 2288x1712. Is there any way I change the default to 640x480 which is available but has to be manually selected each time. Thx Rgds Paul


You need to go to the Menu and set the value for All Reset from ON to OFF. This will retain any setting changes that you make in the camera once it is powered off and back on. Press Ok - right arrow to Mode Menu - down arrow to Setup tab - right ar ... Olympus Digital Cameras

How do I change the incorrect language I selected - the screen was so sensitive and responded to a brush with my finger. Now I can't read the words of a language I don?t even know I chose, to see an option to reset camera to default values. Am I missing something, the manual refers to pages 139 and onto 154, but to reset to the setup screen the instructions refer you to page 139! I read your answer but there is no wavy flag on my camera, or slashes separating the 'word in another language/w


For the Coolpix S4000: Tap MENU. Select the wrench icon for the Setup menu. Select the open book icon for Language. Pick the language of your choice. ... Digital Cameras

How do I change the incorrect language I selected - the screen was so sensitive and responded to a brush with my finger. Now I can't read the words of a language I don?t even know I chose, to see an option to reset camera to default values. Am I missing something, the manual refers to pages 139 and onto 154, but to reset to the setup screen the instructions refer you to page 139! I read your answer but there is no wavy flag on my camera, or slashes separating the 'word in another language/w


Tap MENU. Select the wrench icon for the Setup menu. Select the open book icon for Language. Pick the language of your choice. ... Nikon Coolpix S4000 Digital Camera

How do I change the default setting on my sony dsc-t99 so that the default language of japanese/chinese changes to english? Thanks


To change the language setting, touch MENU, then select Setting (toolbox icon), then select Main Settings (wrench and hammer icon), then select Language Settings (the third item). ... Digital Cameras

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea


I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

How do I change the default setting on my sony DSC-T90 digital camera,so that the default language of japanese changes to english? the camera buy it to japan. Everytime i go to language setting, i dont see any english to transfer it! is there any solution to it? thanks


Here is the user manual for your camera. Please read it you will the language settingshttp://www.docs.sony.com/release/DSCT20_EN_ES.pdf ... Digital Cameras

How do I change the default setting on my sony dsc-t99 so that the default language of japanese/chinese changes to english? Thanks


Touch MENU to display the menu. Touch the toolbox icon. Touch the wrench-and-hammer icon. Select the third item on this menu. ... Sony DSCT99 Digital Camera

Default scene Everytime I turn on my camera the default scene is landscape. Is there any way to change this so that it defaults to portrait?


Hi Brenda,Press the Mode button and press Up or Down arrow key till you find SCN and press OKPress up or down arrow key and choose Potrait and press OK.Come out of the menu and everytime you wanna take a picture, it will be in ... Kodak Easyshare M580 Digital Camera

Dark Images At some point, the images from the camera became very dark in automatic mode. Previous to that, the images were perfect. I have checked all settings many times and changed back to default settings. Nothing has seemed to work other than to change mode to "P" and set for extra exposure. Thanks.


Even in automatic mode, camera still lets you pick what ISO to use. If ISO-Auto is OFF in camera menus, this can give some dark images. Press and hold ISO button and rotate command dial to give a higher ISO, or turn ISO-Auto on in camera menu with cr ... Nikon D40x Digital Camera

I have a sony walkman, but by default the language seems to be japanese. I have tried, changing the language from the japanese to a language I can understand that is english but it is not successful. Therefore, i would like to know how to change the lanuguage of my sony walkman nw s716f from japanese to english


... Digital Cameras

Nikon Digital camera Picture Project software. I want to burn pics to a dvd---when I select pics the first screen on picture project says "You have selected 78 pics, you wiill need 1.2 gigs to copy" When I push the button to burn it switches to "Not enough disc space, you need a 14.4 gig dvd to copy these pics" what is making it change to this--how do I get it to burn and get past the "stop" screen?


... Nikon Digital Cameras

I have a moultrie DGW-100 VERSION 2.3 that is not working when i put a new battery in it it says battery %83 . it will not let me use the select button or the mode button> the up and down buttons will work scrolling thru the options < but wont let me select them or change anything.


... Digital Cameras

My camera has a hand in parentheses on the screen and will not allow a picture to be taken. I have changed batteries, changed out sd card but to no avail. What's the deal????


... Canon PowerShot A720 IS Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

I have just purchases a 8018. It is default set at 3 mp. I have downloaded the manual and followed the instructions to change mp to 8. However, when the camera is turned off it goes back to 3. Is this normal or a fault in my camera? Do I need to remember everytime I want use it to change it from 3mp to 8mp?


15 \015\012Image Size \015\012The image size and quality setting determines the number of photos that can be saved and the amount of \015\012memory required for each photo. The higher the photo quality the more memory it will ... Vivitar ViviCam 8018 Digital Camera

When I use the ArcSoft Photo Impression Program and attach the camera to the computer with the USB extension cable it shows no pictures available. When I turn on the camera the pictures are there. How do I get it to release the pictures to the computer. I tried My Computer as the instructions stated but I do not have a Removable Disc selection after that to select.


Get a card reader and use it to download to a folder you create on your desktop. ... Digital Cameras

When I try to change my flash setting, I get a "Flash settings cannot be changed" message on the screen. It doesn't matter what setting I've selected, it does it for all.


Some modes don't permit flash changes...try a different mode to see if the problem is still there. ... Sony Cyber-shot DSC-H9 Digital Camera

On my Finepix S9500 when I select programmed aperture or shutter priority when I go to select the speed or aperture I am unable to change the aperture or shutter speed, or in fact the ISO setting. The camera seems to work well in automatic mode but I am unable to do any creative work because I can't overide the autp mode. Help!!


Sorry, not a solution but wondfered if you ever solved this because I cannot work it out! ... Digital Cameras

Too much white in outdoor photos and lines in even indoor photos. I have reset to default setting, but it doesn't change anything. I have removed battery after turning off camera in an atenpt to reboot, but no change in all that extra white.


If the photo shoot out show white , the obscure (quality \015\012variation), and even horizontal line ( white lines), and so on over-exposure \015\012cases, even if the use of anti-tremor, set to default values are invalid, \015\012because the camera ... Casio Exilim EX-S500 Digital Camera

I change out the batteries between the rechargeable ones it came with and double A's. I can get it to read the internal memory if I use the cord and connect it to my computer and select reformat. Even if it tells me that it is protected. The lens will not close even after you turn the power off or if you go to review. I tried different memory, changed batteries and read about trouble shooting. It worked perfectly before.


... Sony Cyber-Shot DSC-S90 Digital Camera

How do I change the default folder for saving photos in Camera Window, the supplied software? I've tried changing it in Remote Capture DC in Canon Utilities, but it still puts all the photos in my Pictures folder on my Mac hard drive!


Take a look at the settings of the software. You will surely find the option to change this there. ... Canon PowerShot G10 Digital Camera

The photos taken by my Coolpix s70 are consistently blurry. I've changed the resolution to 8M with no improvement. I've tried Auto settings, various scene settings to no avail. Is there another setting I've somehow changed without realizing?


If you don t have a ccd faulty????its probably that you have change the iso. and the iso are to high. contol this selction. if the camera dont have betterement, it s very probably that the problem is in the ccd sensor. you can search on th ... Digital Cameras

Canon a720is I have a canon a720is that doesn't turn on. Display says change the batteries and then goes black. Camera is approx. 7 months old. I have changed the batteries constantly to no avail. Thanks.


At this point, I installed rechargable batteries and camera appears to be working properly. I will be taking a lot of pictures the next couple of weeks, we'll see how it performs. ... Canon PowerShot A720 IS Digital Camera

Canon MP495 will not respond anymore. printed fine earlier today. Have tried turning on & off (including mains) also changed USB port & cable to no avail. Printer says Idle & in printer set up says available


... Canon Wireless PIXMA MP495 Photo All-in-One Inkjet Printer

My sb600 has stopped flashing for no reason. Changed the batteries and it still didn't work. Tried to trouble shoot to no avail. The next morning I tried it again and it worked like a charm - then tonight it stopped again. All settings haven't been changed.


I would suggest to bring your cam to the service center it is a technical error not a DIY problem.. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1058 seconds